New Arrivals

SKU: EF-EF08292 | Brand: ElecFreaks

ELECFREAKS micro:bit Smart Cutebot Pro Robot Car Kit is a programming robot for STEAM education, it equips with a 4-way infrared line-following sensor, an encoder motor, the LED rainbow light, an ultrasonic sensor, a...

SKU: EC-CMS01101D | Brand: Elecrow

A 10.1" IPS capacitive touchscreen with 1280 × 800 resolution and a distinctive RGB light strip on the back featuring 27 individually addressable LEDs with 19 animated lighting modes. Compatible with Raspberry Pi 3/3B...

SKU: DF-DFR0654 | Brand: DFRobot

The FireBeetle Board ESP32-E is a compact IoT development board based on the ESP-WROOM-32E module with a Tensilica LX6 dual-core processor running at 240MHz. It supports Wi-Fi 802.11 b/g/n and Bluetooth 4.2 (BR/EDR + ...

SKU: WS-7965 | Brand: Waveshare

A USB to TTL serial adapter cable with an embedded PL2303 converter chip. This 1-metre cable provides a simple way to add serial communication to your projects, connecting a standard USB-A port to 3.3V TTL-level UART ...

SKU: EF-EF03415 | Brand: ElecFreaks

The sensor:bit is a breakout board for the BBC micro:bit that extends all available I/O ports into standard GVS (Ground-Voltage-Signal) pin headers. This makes it easy to connect 3 V electronic modules like LEDs, phot...

SKU: DF-DFR0154 | Brand: DFRobot

A 20×4 character I2C LCD display module compatible with Arduino and other microcontrollers. It shows white characters on a blue backlit background, and the I2C interface means you only need two data pins (SDA and SCL)...

SKU: SF-ROB-11015 | Brand: SparkFun

Solenoids are a great way to induce linear motion for pushing, pulling or controlling switches and levers. This smaller solenoid is designed to work directly with 5V which makes it a great match for embedded projects....

SKU: AF-2028 | Brand: Adafruit

This is the assembled version of the Pi T-Cobbler Plus.  It only works with the Raspberry Pi Model Zero, A+, B+, Pi 2,Pi 3! (Any Pi with 2x20 connector)The Raspberry Pi has landed on the Maker World like a 40...

SKU: WS-18995 | Brand: Waveshare

This GPIO header adapter is designed specifically for the Raspberry Pi 400, converting its rear-mounted 40-pin GPIO header into two standard 40-pin headers for easy expansion. The colour-coded header makes it simple t...

SKU: WS-31536 | Brand: Waveshare

Unleash the full potential of your Raspberry Pi 5 with the cutting-edge PCIe to M.2 Adapter with PoE Function (C). Designed with power users in mind, this highly adaptable expansion board offers seamless integration o...

SKU: WS-21022 | Brand: Waveshare

The Waveshare 10.1" HD Capacitive Touch Screen LCD (G) delivers sharp visuals with a 1920×1200 IPS panel at 60Hz and 10-point capacitive touch. The optically bonded toughened glass panel (6H hardness) provides excelle...

SKU: WS-22224 | Brand: Waveshare

A sleek 1.47-inch IPS LCD display module with rounded corners, 172×320 resolution, and 262K RGB colours. The ST7789V3 driver communicates via a 4-wire SPI bus, minimising IO pin usage while delivering clear, colourful...

SKU: AF-5384 | Brand: Adafruit

This 300 mm (11.8") 4-wire cable is fitted with JST-SH female 4-pin connectors on both ends. The 1 mm pitch JST-SH connectors are more compact than the chunkier 2 mm pitch JST-PH, while still providing a secure latchi...

SKU: LB-MACAW | Brand: Little Bird

The Macaw is a compact programmable RGB LED board with 3 WS2812B LEDs, commonly known as NeoPixels. It is ideal for adding bright, addressable colour effects to small electronics, robotics and classroom projects.Its c...

SKU: AF-3961 | Brand: Adafruit

With our fun assortment of conductive materials, cosplay and wearables have never been easier to craft!  This Conductive Nylon tape goes great with our other interesting materials, such as copper tape, ITO gl...

SKU: LB-LR0007 | Brand: Little Bird

Flame Detection Sensor Module for use with Arduino Sensor for flame wavelengths between 760 nm to 1100 nm infrared is most sensitive60 degree detection sensor   Two outputs mode: AO: analog output, real-time ou...

SKU: LB-BIRDBIT | Brand: Little Bird

This robot is a graphical programming robot for STEM education utilising the simple programming of the micro:bit to achieve great results.   This compact robot is plug and play allowing children to quickly learn...

SKU: LB-LS0823 | Brand: Little Bird

The Micro: bit GPIO T-type Expansion Board is a board that connects to the BBC micro:bit and expands the capabilities of the development platform by providing access to more pin. This breakout board for the micro:b...

SKU: LB-LS0301 | Brand: Little Bird

Soldering Iron Tip Cleaner    There is no water necessary , it can save energy , maintain temperature for the soldering iron to allow for faster work.It cleans better than conventional sponges and wo...

SKU: LB-LR0021 | Brand: Little Bird

High Quality Laser sensor module for Arduino.   Features: Operating Voltage: 5V PCB Size: 15*24 mm Wavelength: 650 nm Depth: 8 mm Height: 24 mm Width: 15 mm Product Weight: 2.2 g