New Arrivals
Fresh stock, freshly listed — our New Arrivals collection is the quickest way to see what's just landed at Little Bird Electronics. From connectors and headers to sensors, modules, and maker essentials, new products are added regularly to keep your projects moving.
Whether you're a hobbyist, student, educator, or professional engineer, you'll find useful components for Arduino, Raspberry Pi, and embedded electronics projects. Shipped fast from Australia to your door.
T-Slot Photo Interrupter
SKU: AF-3986 | Brand: Adafruit
This T-Slot Photo Interrupter is a simple plastic sensor with two elements - an IR LED and an IR photo-transistor, situated across a U-shaped gap. You can control the IR LED and turn it on to transmit IR light acro...
Delivered by Tue 30 Jun
EL Wire 1xAAA Mini Inverter
SKU: AF-1349 | Brand: Adafruit
A really tiny portable inverter for EL wire. Powers off of a single AAA battery (not included!), it can drive up to 50cm / 20 inches of our high-brightness EL wire or 10cm x 1cm long piece of EL tape for 3 hours (o...
Delivered by Tue 30 Jun
Platinum RTD Sensor - PT1000 - 3 Wire 1 meter long
SKU: AF-3984 | Brand: Adafruit
For precision temperature sensing, nothing beats a Platinum RTD. Resistance temperature detectors (RTDs) are temperature sensors that contain a resistor that changes resistance value as its temperature changes, bas...
Delivered by Tue 30 Jun
Adjustable Pi Camera Mount
SKU: AF-1434 | Brand: Adafruit
A two-piece adjustable mount from Pimoroni for the Raspberry Pi Camera Module. The design allows multiple angle positions and includes a 1/4"-20 threaded hole for attaching to a standard camera tripod. Compatible wit...
Delivered by Tue 30 Jun
HC-SR04 Ultrasonic Sonar Distance Sensor + 2 x 10K resistors
SKU: AF-3942 | Brand: Adafruit
The HC-SR04 is an ultrasonic distance sensor that measures distances from approximately 2 cm to 400 cm (best results between 10–250 cm). Widely used in robotics, automation, interactive art, and motion sensing project...
Delivered by Tue 30 Jun
Adafruit CRICKIT for micro:bit
SKU: AF-3928 | Brand: Adafruit
The Adafruit CRICKIT for micro:bit is a robotics and electronics driver board designed for the BBC micro:bit. Plug your micro:bit into the 40-pin edge connector and start controlling motors, servos, solenoids, NeoPixe...
Delivered by Tue 30 Jun
microSD Card - 1GB (Class 4)
SKU: SF-COM-15107 | Brand: SparkFun
For the times when all you need is a basic SD card this is the card for you. 1GB capacity is plenty to store MP3s or log environmental data, and still dwarfs older memory systems like magnetic core memory.This card is...
Delivered by Thu 9 Jul
Rugged Metal On/Off Switch with White LED Ring [16mm White On/Off]
SKU: AF-917 | Brand: Adafruit
These chrome-plated metal buttons are rugged and look real good while doing it! Simply drill a 16mm hole into any material up to 1/2" thick and you can fit these in place, there's even a rubber gasket to keep wat...
Delivered by Tue 30 Jun
16mm Illuminated Pushbutton - Green Momentary
SKU: AF-1440 | Brand: Adafruit
A 16mm illuminated pushbutton with a built-in green LED and momentary action. The switch contacts connect only while the button is held down and return to their normally-open state when released — perfect for trigger ...
Delivered by Tue 30 Jun
16mm Illuminated Pushbutton - Yellow Momentary
SKU: AF-1441 | Brand: Adafruit
A 16mm illuminated pushbutton with a built-in yellow LED and momentary action. The switch contacts connect only while the button is held down and return to their normally-open state when released — perfect for trigger...
Delivered by Tue 30 Jun
5V Electromagnet - 25 Kg Holding Force - P40/20
SKU: AF-3875 | Brand: Adafruit
This 5V electromagnet provides 25kg of holding force when energised with approximately 5V DC (4–6V working range). When the power is switched off, the magnet loses its magnetic field, making it suitable for controllab...
Delivered by Wed 22 Jul
Adafruit Circuit Playground Express Enclosure
SKU: AF-3915 | Brand: Adafruit
Keep your Circuit Playground Express safe in this snap-together acrylic enclosure. Designed by Ada-friend Mike Doell, this minimal but elegant case turns your board into an electronic snowflake shape with no tools req...
Delivered by Wed 22 Jul
Gravity: Analog EMG Sensor by OYMotion
SKU: DF-SEN0240 | Brand: DFRobot
The Gravity Analog EMG Sensor by OYMotion detects surface electromyography (sEMG) signals to measure muscle and neural activity. The sensor amplifies the tiny sEMG signal (±1.5 mV) by 1000× and filters noise through d...
Delivered by Thu 9 Jul
Adafruit Trinket - 5V
SKU: AF-1501 | Brand: Adafruit
The Adafruit Trinket 5V is a tiny microcontroller board built around the Atmel ATtiny85 processor. At just 27mm × 15mm, it's small enough to fit into virtually any project and affordable enough to dedicate to a single...
Delivered by Tue 30 Jun
16mm Illuminated Pushbutton - White Latching On/Off Switch
SKU: AF-1478 | Brand: Adafruit
A 16mm illuminated pushbutton with a built-in white LED and latching on/off action. Press once to switch on, press again to switch off — ideal for power switches, mode selectors, and control panels. The LED is wired ...
Delivered by Tue 30 Jun
Heat Sink Thermal Tape - 3M 8810 - 25mm x 25mm
SKU: AF-1467 | Brand: Adafruit
Get that heat sink stuck on good and strong with 3M's thermal tape. Specifically designed for attaching heat sinks to ICs. Works better and is less messy than thermal glues or pastes because the thickness is even acro...
Delivered by Tue 30 Jun
Chip Quik No-Clean Flux Pen - 10mL
SKU: SF-TOL-14579 | Brand: SparkFun
Do you need help soldering a difficult project, reworking a botched pin or just making your life easier? This 10mL no-clean flux pen from Chip Quik® is great for all of your solder, desolder, rework and reflow purpose...
Delivered by Thu 9 Jul
LED Strip Pigtail Connector (4-pin)
SKU: SF-CAB-14576 | Brand: SparkFun
These 4-pin JST-SM pigtail connectors mate perfectly with LED strips and other applications that require only two lines and an option for quick connection and disconnection. Even if you don’t have a specific use fo...
Delivered by Tue 30 Jun
LED Strip Pigtail Connector (3-pin)
SKU: SF-CAB-14575 | Brand: SparkFun
These 3-pin JST-SM pigtail connectors mate perfectly with LED strips and other applications that require only two lines and an option for quick connection and disconnection. Even if you don’t have a specific use fo...
Delivered by Tue 30 Jun
White Nylon Screw and Stand-off Set – M2.5 Thread
SKU: AF-3658 | Brand: Adafruit
A comprehensive 420-piece white nylon screw and standoff set in M2.5 thread — the standard mounting size for most breakout boards, development boards, and single-board computers including Raspberry Pi, Feather, and si...
Delivered by Wed 22 Jul
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
