New Arrivals

SKU: DF-DFR0031-G | Brand: DFRobot

This is a Piranha LED light module. A digital pin (LOW on, HIGH off) is used to control it. The brightness of LED can be controller via PWM output. APPLICATIONS DIY Projects Toys Games Audio indicator SPECIFICATIONS...

SKU: DF-DFR0238 | Brand: DFRobot

This small size breakout is programmable full-color RGB LED for hobbyists, industrial designers, prototypers, and experimenters. It is designed to allow the easy addition of dynamic indicators, displays, and lig...

SKU: SF-WRL-11812 | Brand: SparkFun

This is a simple to use, USB to serial base unit for the Digi XBee line. This unit works with all XBee modules including the Series 1 and Series 2.5, standard and Pro version. Plug the unit into the XBee Explorer, att...

SKU: AF-381 | Brand: Adafruit

This is a pre-wired and waterproofed version of the DS18B20 sensor. Handy for when you need to measure something far away, or in wet conditions. While the sensor is good up to 125°C the cable is jacketed in PVC ...

SKU: AF-364 | Brand: Adafruit

The PN532 is the most popular NFC chip, and is what is embedded in pretty much every phone or device that does NFC. It can pretty much do it all, such as read and write to tags and cards, communicate with phones (s...

SKU: EF-EF05018 | Brand: ElecFreaks

An analogue trimpot (trimmer potentiometer) sensor module from the ELECFREAKS PlanetX series, designed for use with micro:bit via RJ11 connection. The potentiometer provides stepless rotation over a 0°–300° range, out...

SKU: AF-5644 | Brand: Adafruit

The Adafruit 12V Bias Voltage Boost Converter uses the TI TPS61040 to generate 12V DC from as little as 3V input. This compact breakout is ideal for generating the bias voltage needed by OLED displays, LED string back...

SKU: SF-WRL-23287 | Brand: SparkFun

The SparkFun BlueSMiRF v2 with headers is a wireless Bluetooth® serial link. These boards work as a wireless serial UART pipe and are a great wireless replacement for serial cables. Simply pair, connect, and transmit ...

SKU: SF-PRT-15353 | Brand: SparkFun

Sometimes we want our projects on, but sometimes we want to turn them off for a while to save power. The SparkFun Nano Power Timer will run while only consuming minimal power (approximately 35nA) and turn your project...

SKU: PI-COM1700 | Brand: Pimoroni

The AM2320 is a digital temperature and humidity sensor with an I2C interface. Its straightforward I2C communication makes it easy to connect to any Raspberry Pi or Arduino, and it works alongside other I2C sensors an...

SKU: PL-2490 | Brand: Pololu

This sensor is a carrier/breakout board for ST’s VL53L0X laser-ranging sensor, which measures the range to a target object up to 2 m away. The VL53L0X uses time-of-flight measurements of infrared pulses for rangi...

SKU: DF-DFR0164 | Brand: DFRobot

This is a new version of the FTDI breakout board features an Atmega8U2 programmed as a USB-to-serial converter, the same chip found on the Arduino Uno. The 8U2 firmware uses the standard USB COM drivers, and no ...

SKU: AF-444 | Brand: Adafruit

Add a tiny joystick to your project with this PSP thumbstick. This is a replacement component for PSP1000's, but we think they'd make for a great little joystick/thumbstick add-on for a wearable, or portable pro...

SKU: AF-3420 | Brand: Adafruit

The PaPiRus Screen HAT from Pi Supply is an ePaper / eInk screen HAT designed for the Raspberry Pi. Think of it as the older sibling of the PaPiRus Zero.ePaper / eInk is a display technology that mimics the appearance...

SKU: AF-1918 | Brand: Adafruit

An analog UV light sensor breakout based on the GUVA-S12SD photodiode, detecting the 240–370nm range covering UVB and most of the UVA spectrum. An on-board op-amp amplifies the tiny photodiode current to a readable vo...

SKU: PL-2126 | Brand: Pololu

A breakout board for ST's LPS331AP digital barometric pressure sensor. This sensor measures absolute pressure from 260 to 1260 mbar with excellent accuracy (±2 mbar), making it ideal for altitude estimation, weather m...

SKU: PL-1317 | Brand: Pololu

This compact USB-to-serial adapter lets you easily connect TTL serial devices to a computer, where it appears as a virtual COM port. The board is a Micro-USB carrier for the Silicon Labs CP2102N USB-to-UART bridge, pr...

SKU: EF-EF04061 | Brand: ElecFreaks

A linear sliding potentiometer module from the ElecFreaks Octopus series. Provides an analogue voltage output proportional to the slider position, making it useful as a variable input for controlling volume, brightnes...

SKU: AF-3515 | Brand: Adafruit

The Adafruit HTU21D-F is an accurate I²C digital temperature and humidity sensor breakout board. With typical humidity accuracy of ±2% (optimised for 5–95% RH) and temperature accuracy of ±1°C across -30 to 90°C, it's...

SKU: AF-931 | Brand: Adafruit

A compact 0.96" (24.4 mm diagonal) monochrome OLED graphic display with 128 × 32 pixel resolution. Driven by the SSD1306 controller over I2C, each white OLED pixel is individually addressable, producing high-contrast,...