New Arrivals
Fresh stock, freshly listed — our New Arrivals collection is the quickest way to see what's just landed at Little Bird Electronics. From connectors and headers to sensors, modules, and maker essentials, new products are added regularly to keep your projects moving.
Whether you're a hobbyist, student, educator, or professional engineer, you'll find useful components for Arduino, Raspberry Pi, and embedded electronics projects. Shipped fast from Australia to your door.
ENC28J60 Ethernet Module
SKU: EC-SIN16080E | Brand: Elecrow
The ENC28J60 Ethernet Module utilizes the new Microchip ENC28J60 Stand-Alone Ethernet Controller IC featuring a host of features to handle most of the network protocol requirements. The board connects directly to most...
Delivered by Wed 9 Sep
Homefixer ESP8266 devboard
SKU: EC-DTE00413H | Brand: Elecrow
Another development board for ESP8266-12F. But this one is a bit different, made to be easy to set up without the need for additional hardware like programmers and voltage regulators. A wide voltage range switching re...
Delivered by Wed 9 Sep
ESP32- WROVER-I 4MB SPI Flash + 4MB PSRAM WiFi-BT-BLE MCU Module
SKU: EC-DTE01011I | Brand: Elecrow
ESP32-WROVER module is based on ESP32 chip, the core chip is ESP32-D0WDQ6. It is a setup of ESP-WROOM-32 with an additional 4MB SPI PSRAM (Pseudo static RAM). In addition, ESP32-WROVER module also has 4 MB external SP...
Delivered by Wed 9 Sep
Octopus BME280 Pressure Sensor
SKU: EF-EF04087 | Brand: ElecFreaks
Octopus BME280 Pressure Sensor is an electric brick, which has integrated temperature sensor, air pressure sensor and humidity sensor onboard. We can use it to measure humidity, temperature and air pressure, or eve...
Delivered by Thu 3 Sep
Crowduino M0- SD
SKU: EC-ACM36620M | Brand: Elecrow
A simple, yet powerful, 32-bit extension of the Arduino UNO platform. And we design this Crowduino- M0-SD board for you. This board also powered by Atmel’s SAMD21 MCU, featuring a 32-bit ARM Cortex® M0 core. The po...
Delivered by Wed 9 Sep
Adafruit TMP235 - Plug-and-Play STEMMA Analog Temperature Sensor - TMP235
SKU: AF-4686 | Brand: Adafruit
The Adafruit TMP235 is a plug-and-play analog temperature sensor with a 3-pin JST PH (STEMMA) connector. Unlike I2C sensors, this one outputs a simple analog voltage proportional to temperature — just connect it to an...
Delivered by Fri 11 Sep
ESP32-S2-WROVER Module - 4 MB flash and 2 MB PSRAM
SKU: AF-4653 | Brand: Adafruit
The ESP32-S2-WROVER is a Wi-Fi module from Espressif built around the ESP32-S2 SoC — a single-core 240 MHz Xtensa LX7 processor with native USB support, 4 MB flash, and 2 MB PSRAM. It provides 2.4 GHz 802.11b/g/n Wi-F...
Delivered by Fri 11 Sep
SparkFun Qwiic Thermocouple Amplifier - MCP9600 (PCC Connector)
SKU: SF-SEN-16294 | Brand: SparkFun
The MCP9600 Breakout is a high accuracy Thermocouple Amplifier equipped with an I2C interface, accessed over our Qwiic system. Inside the chip are two temperature sensors, one for the thermocouple itself (the hot junc...
Delivered by Mon 31 Aug
SparkFun Humidity Sensor Breakout - SHTC3 (Qwiic)
SKU: SF-SEN-16467 | Brand: SparkFun
Looking to keep a log of the climate in your greenhouse, create a humidor control system or want to track temperature and humidity data for a weather station project? The SparkFun SHTC3 Humidity Sensor may be the perf...
Delivered by Mon 31 Aug
SparkFun GPS Breakout - NEO-M9N, U.FL (Qwiic)
SKU: SF-GPS-15712 | Brand: SparkFun
The SparkFun NEO-M9N GPS Breakout is a high quality, GPS board with equally impressive configuration options. The NEO-M9N module is a 92-channel u-blox M9 engine GNSS receiver, meaning it can receive signals from the ...
Delivered by Mon 31 Aug
SparkFun GPS Dead Reckoning Breakout - NEO-M8U (Qwiic)
SKU: SF-GPS-16329 | Brand: SparkFun
The SparkFun NEO-M8U GPS Breakout is a high quality, GPS board with equally impressive configuration options. The NEO-M8U takes advantage of u-blox's Untethered Dead Reckoning (UDR) technology. The module provides con...
Delivered by Mon 31 Aug
SparkFun GPS Breakout - NEO-M9N, Chip Antenna (Qwiic)
SKU: SF-GPS-15733 | Brand: SparkFun
The SparkFun NEO-M9N GPS Breakout with on-board chip antenna is a high quality, GPS board with equally impressive configuration options. The NEO-M9N module is a 92-channel u-blox M9 engine GNSS receiver, meaning it ca...
Delivered by Thu 20 Aug
Freaduino MEGA2560 White Color MB_FRDN011
SKU: EF-EF01003 | Brand: ElecFreaks
The Freaduino MEGA2560 is an Arduino MEGA 2560 compatible development board from ElecFreaks. It inherits the same pin layout, screw holes, and dimensions as the official Arduino MEGA 2560, so all existing shields, lib...
Delivered by Thu 3 Sep
Octopus 3V laser sensor
SKU: EF-EF04096 | Brand: ElecFreaks
Octopus 3V laser sensor is the laser emission electric brick in our Octopus series, the basic design is from the Octopus electric bricks and the setting of its outlook, the PCB fixing hole and the connectors are the s...
Delivered by Thu 3 Sep
ESP32 WIFI+BLE Module (IPEX antenna)
SKU: DF-DFR0623 | Brand: DFRobot
ESP32-WROVER-B is a highly-integrated generic WiFi-BT-BLE-MCU module with steady performance and low power consumption. It features an IPEX antenna, a 4MB external SPI flash and 64-Mbit SPI PSRAM that operates at 3...
Delivered by Mon 31 Aug
SparkFun Power Delivery Board - USB-C (Qwiic)
SKU: SF-DEV-15801 | Brand: SparkFun
The SparkFun Power Delivery Board uses the STMicroelectronics STUSB4500 controller to negotiate USB Power Delivery (PD) contracts with compatible chargers and adapters. Instead of being limited to 5 V from a standard ...
Delivered by Mon 31 Aug
SparkFun Qwiic Button - Red LED
SKU: SF-BOB-15932 | Brand: SparkFun
The SparkFun Qwiic Button simplifies adding a tactile button to your I2C project. It handles debouncing, pull-up resistors, and polling internally, so you can focus on your application. A built-in red LED provides vis...
Delivered by Mon 31 Aug
ESP32 WIFI+BLE Module (PCB antenna)
SKU: DF-DFR0624 | Brand: DFRobot
ESP32-WROVER-B is a highly-integrated generic WiFi-BT-BLE-MCU module with steady performance and low power consumption. It features a PCB antenna, a 4MB SPI flash and 64-Mbit SPI PSRAM that operates at 3.3V. The modul...
Delivered by Mon 31 Aug
SparkFun High Precision Temperature Sensor - TMP117 (Qwiic)
SKU: SF-SEN-15805 | Brand: SparkFun
The SparkFun Qwiic TMP117 breakout is a high precision temperature sensor equipped with an I2C interface. It outputs temperature readings with high precision of ±0.1°C across the temperature range of -20°C to +50°Cs w...
Delivered by Mon 31 Aug
Adafruit Infineon Trust M Breakout Board - STEMMA QT / Qwiic
SKU: AF-4351 | Brand: Adafruit
The Adafruit Infineon Trust M Breakout features the OPTIGA Trust M (SLS 32AIA) secure element — a hardware crypto authentication chip that stores private keys securely, performs cryptographic operations, and generates...
Delivered by Fri 11 Sep
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
