New Arrivals

SKU: EC-ESP11002R | Brand: Elecrow

A WiFi-controlled relay module designed for ESP-01 or ESP-01S modules (based on the ESP8266). The relay is controlled via GPIO0 with a low-level trigger, allowing you to switch mains-powered devices on and off wireles...

SKU: DF-SEN0347 | Brand: DFRobot

This infrared photoelectric switch consists of a transmitter and receiver pair that detects objects at distances up to 1.5 m with a response time under 1 ms. The infrared beam provides stable detection regardless of a...

SKU: EF-EF10030 | Brand: ElecFreaks

A passive infrared (PIR) motion sensor module based on the BISS0001 IC, capable of detecting human movement at up to 7 metres. Outputs a digital high signal when motion is detected, making it easy to interface with Ar...

SKU: SF-ROB-15277 | Brand: SparkFun

This is a simple ~140RPM (no load), DC planetary gearmotor. This motor is great for various applications such as robotics, electric locks, household automation, and small actuators.The supply voltage range is 6VDC - 2...

SKU: AF-1733 | Brand: Adafruit

A rugged anemometer designed for outdoor wind speed measurement with a simple analog voltage output. Connect it to any microcontroller's analog input for easy wind speed readings — no complex protocols or libraries re...

SKU: DF-DFR0146 | Brand: DFRobot

The ETH008 is an 8-channel relay module controlled over Ethernet using TCP/IP commands or a built-in HTTP web interface. Each relay is rated up to 16A and features SPCO (Single Pole Change Over) contacts with normally...

SKU: SF-ROB-12316 | Brand: SparkFun

These micro gearmotors are incredibly tough and feature full metal gears. They have a gear ratio of 30:1 and operate up to 12 volts and have a stall torque of 9 oz-in. and a max speed of 900 RPM. Each micro gearmot...

SKU: SF-ROB-09238 | Brand: SparkFun

This is a simple, but very powerful stepper motor with a 4-wire cable attached. This is a Bipolar Motor. Features: Step Angle (degrees) :1.8 2 Phase Rated Voltage : 12V Rated Current : 0.33A Holding Torque : 2.3k...

SKU: SF-ROB-12285 | Brand: SparkFun

This compact micro gearmotor features a full metal gear train with a 298:1 ratio, delivering high torque in a small form factor. Operating from 6–12V, it provides up to 90 RPM and 70 oz·in of stall torque, making it i...

SKU: SF-ROB-12205 | Brand: SparkFun

This micro gearmotor features full metal gears for exceptional durability and a 150:1 gear ratio that delivers up to 175 RPM at 12V with 45 oz-in of stall torque. The compact form factor and 3mm D-shaft make it ideal ...

SKU: SF-COM-11102 | Brand: SparkFun

This 1024 pulse per rotation rotary encoder outputs gray code which you can interpret using a microcontroller and find out which direction the shaft is turning and by how much. This allows you to add feedback to motor...

SKU: PL-3216 | Brand: Pololu

A high-power 12V brushed DC gearmotor in the Pololu 25D form factor (25mm diameter) with a 34.014:1 metal spur gearbox and an integrated 48 CPR quadrature encoder. The encoder provides 1632.67 counts per revolution of...

SKU: PL-3039 | Brand: Pololu

The 50:1 Micro Metal Gearmotor HPCB 12V is a compact brushed DC gearmotor from Pololu's popular micro metal gearmotor family. This high-power carbon brush (HPCB) variant operates at 12V and draws half the current of i...

SKU: LB-PMMA19004A001 | Brand: Little Bird

A compact 370 DC diaphragm pump designed for automated plant watering systems and other fluid transfer applications. With a wide operating voltage range of 3–24V, it's easy to integrate with Arduino and other microcon...

SKU: EC-SSE01209P | Brand: Elecrow

This is a high-precision temperature control module, it can not only show the temperature, but also according to the current temperature of the relay control, it can control some of the power equipment through the ...

SKU: AF-324 | Brand: Adafruit

A stepper motor to satisfy all your robotics needs! This 4-wire bipolar stepper has 1.8° per step for smooth motion and a nice holding torque. The motor was specified to have a max current of 350mA so that it could...

SKU: PL-2482 | Brand: Pololu

The Pololu basic relay carrier modules allow simple control of a single-pole, double-throw (SPDT) switch from low-voltage, low-current control signals. This item includes the basic carrier PCB with a soldered-in 1...

SKU: PL-1105 | Brand: Pololu

A powerful brushed DC motor with a 70:1 metal gearbox, designed for operation at 12V. The unit features a 16mm-long, 6mm-diameter D-shaped output shaft, suitable for robotics and mechanical projects requiring high tor...

SKU: EF-EF03010 | Brand: ElecFreaks

An 8-channel relay module compatible with Arduino, Raspberry Pi, and other MCU boards (PIC, ARM, MSP430). Each relay channel has an LED indicator showing its output state, making it easy to monitor which relays are ac...

SKU: PL-3243 | Brand: Pololu

A medium-power 12V brushed DC gearmotor with a 98.78:1 metal spur gearbox and an integrated 48 CPR quadrature encoder on the motor shaft. The encoder provides 4741.44 counts per revolution of the gearbox output shaft,...