New Arrivals
Fresh stock, freshly listed — our New Arrivals collection is the quickest way to see what's just landed at Little Bird Electronics. From connectors and headers to sensors, modules, and maker essentials, new products are added regularly to keep your projects moving.
Whether you're a hobbyist, student, educator, or professional engineer, you'll find useful components for Arduino, Raspberry Pi, and embedded electronics projects. Shipped fast from Australia to your door.
Platinum RTD Sensor - PT1000 - 3 Wire 1 meter long
SKU: AF-3984 | Brand: Adafruit
For precision temperature sensing, nothing beats a Platinum RTD. Resistance temperature detectors (RTDs) are temperature sensors that contain a resistor that changes resistance value as its temperature changes, bas...
Delivered by Thu 20 Aug
Gravity: Analog EMG Sensor by OYMotion
SKU: DF-SEN0240 | Brand: DFRobot
The Gravity Analog EMG Sensor by OYMotion detects surface electromyography (sEMG) signals to measure muscle and neural activity. The sensor amplifies the tiny sEMG signal (±1.5 mV) by 1000× and filters noise through d...
Delivered by Mon 31 Aug
Adafruit HUZZAH ESP8266 Breakout
SKU: AF-2471 | Brand: Adafruit
The Adafruit HUZZAH ESP8266 Breakout is a breadboard-friendly WiFi microcontroller board built around the Espressif ESP8266. With an 80 MHz processor, full WiFi client and access point support, a built-in TCP/IP stack...
Delivered by Thu 20 Aug
Mini Photocell
SKU: DF-FIT0180 | Brand: DFRobot
This type of photoresistor is made of environment-friendly materials(no Cadmium and Lead) compared with the traditional CDS photoresistor. It changes resistance depending on the amount of light it is exposed to. Thes...
Delivered by Mon 31 Aug
Muscle Sensor Surface EMG Electrodes - H124SG Covidien [Pack of 6]
SKU: AF-2773 | Brand: Adafruit
Have your next project be controlled by your muscles with this pack of Muscle Sensor Surface EMG Electrodes! Pair the electrodes with the MyoWare Muscle Sensor and a microcontroller (ie. Arduino...
Delivered by Thu 20 Aug
Potentiometers Kit (55pcs)
SKU: DF-FIT0189 | Brand: DFRobot
Variable resistors also named as potentiometer are electrical equipments having two terminal points in opposite direction. The terminals are used for electrical resistance in a circuit board. Variable resistors are...
Delivered by Thu 20 Aug
3.5mm (1/8) Stereo Audio Plug Terminal Block
SKU: AF-2790 | Brand: Adafruit
A 3.5 mm (1/8") stereo (TRS) audio plug with screw terminal connections — no soldering required. Use stranded or solid-core wire and a small screwdriver to create custom audio cables, breakouts, and test leads. This ...
Delivered by Thu 20 Aug
Adafruit Feather M0 Basic Proto - ATSAMD21 Cortex M0
SKU: AF-2772 | Brand: Adafruit
The Feather M0 Basic Proto is the no-frills member of the Feather M0 family, built around the ATSAMD21G18 ARM Cortex M0 processor with a built-in prototyping area for soldering on extra components. With 256KB of flash...
Delivered by Thu 20 Aug
SparkFun Ambient Light Sensor Breakout - TEMT6000
SKU: SF-BOB-08688 | Brand: SparkFun
Basic breakout board for the TEMT6000 Ambient Light Sensor. Only what you need, nothing you don’t. Sensor acts like a transistor - the greater the incoming light, the higher the analog voltage on the signal pin. Docu...
Delivered by Thu 20 Aug
Flex Sensor 4.5
SKU: SF-SEN-08606 | Brand: SparkFun
A simple flex sensor 4.5" in length. As the sensor is flexed, the resistance across the sensor increases. Patented technology by Spectra Symbol - they claim these sensors were used in the original Nintendo Power Gl...
Delivered by Thu 20 Aug
SparkFun Multiplexer Breakout - 8 Channel (74HC4051)
SKU: SF-BOB-13906 | Brand: SparkFun
The SparkFun Multiplexer Breakout provides access to all pins and features of the 74HC4051, an 8-channel analog multiplexer/demultiplexer. The 74HC4051 allows you to turn four I/O pins into eight multifunctional, indi...
Delivered by Thu 20 Aug
SparkFun Load Sensor Combinator
SKU: SF-BOB-13878 | Brand: SparkFun
The SparkFun Load Sensor Combinator is a bare PCB that combines four load sensors into a standard four-wire Wheatstone bridge configuration. If you open up an electronic bathroom scale, you’ll find a large rat’s ne...
Delivered by Thu 20 Aug
16 Channel Multiplexer
SKU: SF-COM-00299 | Brand: SparkFun
The Texas Instruments CD74HC4067 is a 16-channel analogue multiplexer/demultiplexer IC. It allows you to route one of 16 analogue signals to a single common pin (or vice versa) using just 4 digital control lines plus ...
Delivered by Thu 20 Aug
Thermocouple Type-K - Stainless Steel
SKU: SF-SEN-13715 | Brand: SparkFun
This is a stainless steel, Type-K Thermocouple probe. A thermocouple works by taking two wires made of dissimilar metals, connecting them at the two ends, and making a temperature gradient between one end and the othe...
Delivered by Mon 31 Aug
Round Force-Sensitive Resistor (FSR) [Interlink 402]
SKU: AF-166 | Brand: Adafruit
The Interlink 402 is a round force-sensitive resistor (FSR) with a 12.7 mm (0.5″) sensing area. It changes resistance based on applied pressure — the harder you press, the lower the resistance — making it a simple, lo...
Delivered by Thu 20 Aug
Anemometer Kit (0-5V)
SKU: DF-SEN0170 | Brand: DFRobot
A three-cup anemometer kit with 0–5V analog voltage output for building custom weather stations and wind monitoring systems. The aluminium alloy construction provides high strength, weather resistance, and corrosion r...
Delivered by Thu 20 Aug
SparkFun ESP8266 Thing
SKU: SF-WRL-13231 | Brand: SparkFun
The SparkFun ESP8266 Thing is a breakout and development board for the ESP8266 WiFi SoC — a popular platform for IoT and WiFi-connected projects. All module pins are broken out to breadboard-compatible rows, and on-bo...
Delivered by Thu 20 Aug
10K Precision Epoxy Thermistor [3950 NTC]
SKU: AF-372 | Brand: Adafruit
An epoxy-coated precision NTC thermistor with a 10kΩ resistance at 25°C and ±1% accuracy. The resistance decreases as temperature rises and increases as it cools, making it straightforward to measure temperature with ...
Delivered by Fri 11 Sep
Biomedical Sensor Pad (10 pack)
SKU: SF-SEN-12969 | Brand: SparkFun
A 10-pack of disposable biomedical sensor pads (electrodes) for measuring EEG, ECG, and EMG signals. Each pad features integrated latex-free gel for strong skin adhesion and a snap connector that attaches easily to el...
Delivered by Mon 31 Aug
Panel Mount Stereo Audio Extension Cable - 1/8 / 3.5mm
SKU: AF-3319 | Brand: Adafruit
Make your next audio input/output project in a box with this handy Panel Mount Stereo Audio Extension Cable - 1/8" / 3.5mm. OK its quite a mouthful, but its pretty simple: that headphone or microphone jack you know...
Delivered by Fri 11 Sep
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
