New Arrivals
Fresh stock, freshly listed — our New Arrivals collection is the quickest way to see what's just landed at Little Bird Electronics. From connectors and headers to sensors, modules, and maker essentials, new products are added regularly to keep your projects moving.
Whether you're a hobbyist, student, educator, or professional engineer, you'll find useful components for Arduino, Raspberry Pi, and embedded electronics projects. Shipped fast from Australia to your door.
Grove - Sound Sensor
SKU: SS-101020023 | Brand: Seeed Studio
The Sound sensor module is a simple microphone. Based on the power amplifier LM386 and the electret microphone, it can be used to detect the sound strength of the environment. The value of output can be adjusted b...
Delivered by Fri 19 Jun
Gravity: Arduino LPG Gas Sensor (MQ5)
SKU: DF-SEN0130 | Brand: DFRobot
The Gravity MQ5 gas sensor is highly sensitive to LPG, natural gas, and town gas, with lower sensitivity to alcohol, cooking fumes, and cigarette smoke. The analogue output is proportional to gas concentration, and se...
Delivered by Tue 30 Jun
Pololu Carrier for MQ Gas Sensors (Bare PCB Only)
SKU: PL-1479 | Brand: Pololu
This carrier board is designed to work with any of the MQ-series gas sensors, simplifying the interface from 6 to 3 pins—ground, power and analog voltage output—that are broken out with a 0.1" spacing, making the boar...
Delivered by Fri 19 Jun
Gravity: Arduino CO/Combustible Gas Sensor (MQ9)
SKU: DF-SEN0134 | Brand: DFRobot
The Gravity MQ-9 gas sensor detects carbon monoxide (CO) and combustible gases including methane and propane. It uses a semiconductor SnO2 sensing element that cycles between high and low temperatures — detecting CO a...
Delivered by Fri 19 Jun
Sharp GP2Y0A21YK0F Analog Distance Sensor 10-80cm
SKU: PL-136 | Brand: Pololu
The Sharp GP2Y0A21YK0F is an infrared distance sensor that outputs an analogue voltage corresponding to the distance of the nearest object within its 10–80 cm detection range. Using IR triangulation, it provides relia...
Delivered by Fri 19 Jun
Adafruit PCM5122 I2S DAC with Line Level Output - HW, I2C or SPI
SKU: AF-6421 | Brand: Adafruit
The Adafruit PCM5122 I2S DAC delivers excellent stereo line-level audio with 112dB SNR and -93dB THD. Out of the box it works in hardware mode — just pipe I2S audio in with no MCLK or configuration needed. For advance...
Delivered by Thu 9 Jul
Adafruit BMP585 Ported I2C / SPI Temperature and Pressure Sensor
SKU: AF-6413 | Brand: Adafruit
The BMP585 from Bosch is a ported barometric pressure and temperature sensor featuring a tube attachment point for differential or remote pressure measurements. It delivers exceptional precision with altitude noise as...
Delivered by Thu 9 Jul
Adafruit QT 5V to 3V Shifter Breakout - STEMMA QT / Qwiic
SKU: AF-5637 | Brand: Adafruit
The Adafruit QT 5V to 3V Shifter Breakout lets you safely connect 3.3 V STEMMA QT / Qwiic sensors to 5 V microcontrollers like the Arduino Uno. Many I2C sensors and Qwiic-compatible devices are not 5 V safe — connecti...
Delivered by Fri 19 Jun
Adafruit QT 3V to 5V Level Booster Breakout - STEMMA QT / Qwiic
SKU: AF-5649 | Brand: Adafruit
The Adafruit QT 3V to 5V Level Booster Breakout lets you connect 3.3 V STEMMA QT / Qwiic devices to sensors and peripherals that require 5 V power or logic. Most modern microcontrollers (ESP32, RP2040, SAMD, micro:bit...
Delivered by Fri 19 Jun
MyoWare 2.0 Arduino Shield
SKU: SF-DEV-18426 | Brand: SparkFun
The MyoWare® 2.0 Arduino Shield is designed to easily connect up to six MyoWare 2.0 Muscle Sensors and Link Shields using 3.5mm TRS-to-TRS audio cables. The board comes pre-populated with male headers so all you would...
Delivered by Tue 30 Jun
Gravity: I2C Voice Recorder Module EDU
SKU: DF-DFR0699 | Brand: DFRobot
Gravity: I2C Voice Recorder Module EDU is DFRobot all-in-one voice interaction module, which integrates recording and playback functions into one. It can record with one button, and also supports Gravity: I2C interfac...
Delivered by Tue 30 Jun
Gravity: Alcohol Sensor (0-5ppm)
SKU: DF-SEN0376 | Brand: DFRobot
This is an Arduino compatible alcohol sensor module from DFRobot with a 0-5ppm measuring range, supporting I2C and UART outputs. Aiming at fast and accurate detection of alcohol gas concentration in the air,...
Delivered by Tue 30 Jun
Octopus MQ3 Alcohol Sensor Brick
SKU: EF-EF04060 | Brand: ElecFreaks
The Octopus MQ3 Alcohol Sensor Brick from ElecFreaks is an analogue gas sensor module with high sensitivity to alcohol vapour. It outputs an analogue voltage proportional to the detected alcohol concentration, making ...
Delivered by Tue 30 Jun
Octopus Passive buzzer Brick OBPB01
SKU: EF-EF04031 | Brand: ElecFreaks
The Octopus Passive Buzzer Brick is a plug-and-play buzzer module from the Elecfreaks Octopus series. Unlike an active buzzer, the passive design lets you control both tone and volume via PWM, making it ideal for gene...
Delivered by Fri 19 Jun
SparkFun ATX Power Connector Breakout Board
SKU: SF-BOB-15035 | Brand: SparkFun
Do you need to power a project with 12V and 5V from one power supply? The ATX power connector breakout board breaks out the standard 4-pin computer peripheral port when mated with an ATX connector for your 12V and 5V ...
Delivered by Tue 30 Jun
Fish-eye Camera Module (OV2640)
SKU: M5-U037 | Brand: Little Bird
The M5CameraF is a compact ESP32-based camera module featuring a 2-megapixel OV2640 sensor with a 160° fish-eye lens. With built-in Wi-Fi and Bluetooth, it streams images over a wireless connection and can be programm...
Delivered by Fri 19 Jun
SparkFun Logic Level Converter - Single Supply
SKU: SF-PRT-14765 | Brand: SparkFun
The SparkFun Single Supply Logic Level Converter is logic level and power supply translator in one small package. This little board breaks out the Texas Instruments TXB0104 4-bit bi-directional voltage-level tran...
Delivered by Fri 19 Jun
Temperature and Humidity Sensor Module KY-028
SKU: LB-LR0010 | Brand: Little Bird
Digital TempTemperature sensing module using an NTC thermistor. The output signal at ‘DO’ switches high when the preset (adjustable) temperature is reached. An analog output signal from the sensor is availab...
Delivered by Fri 19 Jun
Gravity: Arduino Carbon Monoxide Sensor (MQ7)
SKU: DF-SEN0132 | Brand: DFRobot
INTRODUCTION This is an Arduino Carbon Monoxide Sensor. It uses MQ7 probe to detect Carbon Monoxide (CO) concentrations in the air from 20 to 2000ppm. The sensitivity ca...
Delivered by Tue 30 Jun
Carbon Monoxide Sensor (MQ7)
SKU: DF-FIT0227 | Brand: DFRobot
The MQ7 is a simple-to-use Carbon Monoxide (CO) sensor suitable for detecting CO concentrations in the air. It offers a wide detection range from 20 to 2000 ppm, making it ideal for safety monitoring and air quality p...
Delivered by Fri 19 Jun
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
