New Arrivals
Fresh stock, freshly listed — our New Arrivals collection is the quickest way to see what's just landed at Little Bird Electronics. From connectors and headers to sensors, modules, and maker essentials, new products are added regularly to keep your projects moving.
Whether you're a hobbyist, student, educator, or professional engineer, you'll find useful components for Arduino, Raspberry Pi, and embedded electronics projects. Shipped fast from Australia to your door.
Gravity: GNSS GPS BeiDou Positioning Module with RTC - I2C&UART
SKU: DF-DFR1103 | Brand: DFRobot
##Introduction The Gravity GNSS Positioning & Timing Module integrates satellite positioning functionality and a real-time clock (RTC). The module automatically obtains satellite time based on a preset calibration per...
Delivered by Tue 30 Jun
Adafruit LPS28 (LPS28DFW) Pressure Sensor - STEMMA QT / Qwiic
SKU: AF-6067 | Brand: Adafruit
The Adafruit LPS28 Pressure Sensor Breakout features the ST LPS28DFW — a barometric pressure sensor with an extended range up to 4060 hPa, far beyond the ~1260 hPa limit of most competing sensors. This makes it suitab...
Delivered by Thu 9 Jul
Adafruit INA3221 - Triple 0-26 VDC, ±3.2 Amp Power Monitor
SKU: AF-6062 | Brand: Adafruit
The Adafruit INA3221 breakout monitors current, voltage, and power on up to three independent power rails simultaneously over I2C. Each channel supports high or low-side measurement up to +26V DC at ±3.2A with ±1% pre...
Delivered by Thu 9 Jul
Gravity: BME688 AI Environmental Sensor (VOC, Temperature, Humidity, Pressure)
SKU: DF-SEN0617 | Brand: DFRobot
The Gravity BME688 is an advanced MEMS environmental sensor from Bosch that measures temperature, humidity, barometric pressure, and volatile organic compounds (VOC) in a single compact module. It supports both I²C an...
Delivered by Tue 30 Jun
Gravity: Thin-film Pressure Sensor for Pressure Science Course
SKU: DF-SEN0616 | Brand: DFRobot
The Gravity: Thin-film Pressure Sensor measures pressure through the deformation of a flexible film material. As pressure increases, the film deforms, producing higher analog output values, while lighter pressure resu...
Delivered by Tue 30 Jun
Sensor ELECFREAKS PlanetX DHT11
SKU: EF-EF05004 | Brand: ElecFreaks
It is sensitive to changes in ambient temperature and humidity and can be used for high-temperature alarms and environmental humidity detection.PlanetX DHT11
Delivered by Tue 30 Jun
SparkFun Ultrasonic Distance Sensor - TCT40 (Qwiic)
SKU: SF-SEN-24805 | Brand: SparkFun
The SparkFun Qwiic Ultrasonic Distance Sensor, a user-friendly upgrade to the popular HC-SR04 sensor, offers non-contact distance measurement from 2cm to 400cm with an accuracy of 3mm. This sensor is designed to seaml...
Delivered by Tue 30 Jun
Adafruit TSMP96000 "Code Learning" Infrared IR Receiver Breakout
SKU: AF-5970 | Brand: Adafruit
The Adafruit TSMP96000 "Code Learning" Infrared IR Receiver Breakout detects IR signals across a wide frequency range of 20–60 KHz, making it perfect for "code learning" applications where you need your device to work...
Delivered by Thu 9 Jul
Adafruit SEN54 or SEN55 Adapter Breakout - STEMMA QT / Qwiic
SKU: AF-5964 | Brand: Adafruit
The Adafruit SEN54/SEN55 Adapter Breakout lets you quickly connect a Sensirion SEN5x environmental sensor node to any microcontroller or single-board computer via STEMMA QT / Qwiic — no soldering or breadboarding requ...
Delivered by Thu 9 Jul
Fermion: MEMS Formaldehyde HCHO Gas Detection Sensor (Breakout, 0-3ppm)
SKU: DF-SEN0563 | Brand: DFRobot
Fermion: MEMS Formaldehyde HCHO Gas Detection Sensor employs state-of-the-art micro-electromechanical system (MEMS) technology, endowing the sensor with compact dimensions (13x13x2.5mm), low power consumption (<20mA),...
Delivered by Tue 30 Jun
Fermion: MEMS Nitrogen Dioxide NO2 Gas Detection Sensor (Breakout, 0.1-10ppm)
SKU: DF-SEN0574 | Brand: DFRobot
Fermion: MEMS Nitrogen Dioxide NO2 Gas Detection Sensor employs state-of-the-art micro-electromechanical system (MEMS) technology, endowing the sensor with compact dimensions (13x13x2.5mm), low power consumption (<20m...
Delivered by Tue 30 Jun
Adafruit TSC2046 SPI Resistive Touch Screen Controller
SKU: AF-5767 | Brand: Adafruit
The Adafruit TSC2046 is an SPI resistive touch screen controller that offloads touch reading from your microcontroller. Instead of tying up analog pins and constantly polling, the TSC2046 handles all touch sensing ove...
Delivered by Thu 9 Jul
Adafruit NeoDriver - I2C to NeoPixel Driver Board - Stemma QT
SKU: AF-5766 | Brand: Adafruit
The Adafruit NeoDriver converts I2C commands into NeoPixel (WS2812/SK6812) timing signals, letting you control addressable LED strips from any board with an I2C bus — even platforms that lack native NeoPixel support. ...
Delivered by Thu 9 Jul
Adafruit ANO Rotary Navigation Encoder to I2C Stemma QT Adapter
SKU: AF-5740 | Brand: Adafruit
This STEMMA QT adapter makes the ANO rotary navigation encoder easy to use over I2C — no GPIO-heavy wiring needed. An on-board microcontroller running Adafruit's seesaw firmware tracks all rotary pulses and button pre...
Delivered by Thu 9 Jul
AGS02MA I2C TVOC Gas Sensor
SKU: AF-5593 | Brand: Adafruit
The AGS02MA is a compact MOX-based TVOC (Total Volatile Organic Compounds) gas sensor with an I2C interface. It features a built-in ADC that outputs gas resistance and parts-per-billion (ppb) readings — higher ppb val...
Delivered by Thu 9 Jul
FLiR Lepton Breakout Board V2
SKU: SF-BOB-16912 | Brand: SparkFun
The FLIR Lepton® Thermal Camera Breakout Board is an easy-to-interface evaluation board to quickly connect the FLIR Lepton camera module to common platforms like Raspberry Pi or custom hardware. It provides onboard po...
Delivered by Tue 30 Jun
SparkFun PIR Breakout Starter Kit (170uA)
SKU: SF-KIT-19519 | Brand: SparkFun
The SparkFun 170uA PIR Breakout Starter Kit comes with everything you need to get started using Passive Infrared (PIR) sensors. PIR sensors are great for detecting motion in a small area around the sensor. The 170µA S...
Delivered by Tue 30 Jun
Intelligent Rain Detection Module
SKU: DF-SEN0545 | Brand: DFRobot
This smart rain sensor offers a fast way to detect rainfall change on glass in real-time free from effects like sunlight, dust, leaves, etc., and feeds back information (no rain, light rain, moderate rain, or heavy ra...
Delivered by Tue 30 Jun
Fermion: 8-Bit Level Translator (Breakout)
SKU: DF-DFR0844 | Brand: DFRobot
After purchasing an open-source product that is not electrical level compatible, you may find that your sensor cannot work normally or even is easy to be damaged because the level of the sensor and your controller are...
Delivered by Tue 30 Jun
Fermion: MEMS Gas Sensor - MiCS-5524 (Breakout)
SKU: DF-SEN0440 | Brand: DFRobot
A compact MEMS gas sensor breakout based on the MiCS-5524, capable of detecting concentrations of multiple gases including carbon monoxide (CO), methane (CH4), ethanol (C2H5OH), propane (C3H8), butane (C4H10), hydroge...
Delivered by Tue 30 Jun
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
