New Arrivals
Fresh stock, freshly listed — our New Arrivals collection is the quickest way to see what's just landed at Little Bird Electronics. From connectors and headers to sensors, modules, and maker essentials, new products are added regularly to keep your projects moving.
Whether you're a hobbyist, student, educator, or professional engineer, you'll find useful components for Arduino, Raspberry Pi, and embedded electronics projects. Shipped fast from Australia to your door.
Gravity: Analog Sound Level Meter
SKU: DF-SEN0232 | Brand: DFRobot
The Gravity Analog Sound Level Meter is an Arduino-compatible decibel meter that accurately measures environmental noise levels. It uses an instrumentation-grade circuit with a low-noise microphone for high-precision ...
Delivered by Tue 30 Jun
LilyPad Temperature Sensor
SKU: SF-DEV-08777 | Brand: SparkFun
Detecting temperature changes has never been easier. The MCP9700 is a small thermistor type temperature sensor. This sensor will output 0.5V at 0 degrees C, 0.75V at 25 C, and 10mV per degree C. Doing an analog to dig...
Delivered by Tue 30 Jun
Infrared Proximity Sensor - Sharp GP2Y0A21YK
SKU: SF-SEN-00242 | Brand: SparkFun
The Sharp GP2Y0A21YK is an infrared proximity sensor with an analogue voltage output that varies with distance — from 3.1 V at 10 cm to 0.4 V at 80 cm. It uses an IR emitter and position-sensitive detector to measure ...
Delivered by Fri 19 Jun
Touch screen breakout board (0.5mm FPC)
SKU: AF-334 | Brand: Adafruit
If you've got a resistive touch screen that you'd like to use, you'll need this breakout! It has a fine pitch (0.5mm) connector soldered onto it and it's broken out into the 4 resistive wires of the panel. A petite...
Delivered by Fri 19 Jun
Analog Mini Thumbstick Breakout Board
SKU: AF-3246 | Brand: Adafruit
A neat little breakout board designed for mounting a PSP-style mini thumbstick to your project. The board features panel-mount friendly hole placement and dual-sided headers for mechanical stability when connected to ...
Delivered by Thu 9 Jul
Gravity:Analog UV Sensor V2
SKU: DF-SEN0162 | Brand: DFRobot
The Gravity Analog UV Sensor V2 uses a GUVA-S12SD photodiode to detect ultraviolet radiation in the 200–370 nm (UV-A) wavelength range. It outputs a linear analogue voltage signal proportional to UV intensity, making ...
Delivered by Tue 30 Jun
SparkFun Sound Detector
SKU: SF-SEN-12642 | Brand: SparkFun
The SparkFun Sound Detector is a small and very easy to use audio sensing board with three different outputs. The Sound Detector not only provides an audio output, but also a binary indication of the presence of so...
Delivered by Tue 30 Jun
Analog UV Light Sensor Breakout - GUVA-S12SD
SKU: AF-1918 | Brand: Adafruit
An analog UV light sensor breakout based on the GUVA-S12SD photodiode, detecting the 240–370nm range covering UVB and most of the UVA spectrum. An on-board op-amp amplifies the tiny photodiode current to a readable vo...
Delivered by Thu 9 Jul
WT8266-S1 WiFi Module Based on ESP8266
SKU: DF-TEL0109 | Brand: DFRobot
WT8266-S1 Wi-Fi module is a low consumption, high performance embedded Wi-Fi network control module designed by Wireless-Tag. It can meet the IoT application requirements in smart power grids, building aut...
Delivered by Fri 19 Jun
Gravity: Heart Rate Monitor Sensor For Arduino
SKU: DF-SEN0203 | Brand: DFRobot
The DFRobot heart rate sensor is a thumb-sized heart rate monitor designed for Arduino microcontrollers. This sensor is a pulse sensor which is developed based on PPG (PhotoPlethysmoGraphy) techniques. This ...
Delivered by Tue 30 Jun
IR Reflectance Sensor - QRE1113
SKU: SF-COM-09542 | Brand: SparkFun
The QRE1113 is a small IR reflectance sensor. This sensor is often used in line following robots because, if it can sense if a surface is white or black. There are four pins on the QRE1113 - two control the IR em...
Delivered by Tue 30 Jun
Gravity: Thin-film Pressure Sensor for Pressure Science Course
SKU: DF-SEN0616 | Brand: DFRobot
The Gravity: Thin-film Pressure Sensor measures pressure through the deformation of a flexible film material. As pressure increases, the film deforms, producing higher analog output values, while lighter pressure resu...
Delivered by Tue 30 Jun
Sensor ELECFREAKS PlanetX MQ2
SKU: EF-EF05031 | Brand: ElecFreaks
The gas sensor is an essential sensor for environmental detection. ELECFREAKS PlanetX MQ2 Sensor can be used for smoke detection, the greater the smoke is, the greater the voltage value will be. It is able to detect t...
Delivered by Tue 30 Jun
ELECFREAKS PlanetX CO2 Sensor
SKU: EF-EF05030 | Brand: ElecFreaks
The gas sensor is an essential sensor for environmental detection. The ELECFREAKS PlanetX CO2 Sensor is designed to detect the concentration of CO2 with high sensitivity. The higher the concentration of CO2 is, the sm...
Delivered by Tue 30 Jun
ELECFREAKS PlanetX LED - Green
SKU: EF-EF05010 | Brand: ElecFreaks
A green LED module from the ELECFREAKS PlanetX sensor range, designed for use with micro:bit and the Nezha expansion board. The RJ11 connector makes it simple to plug in — no soldering or breadboard required. Control...
Delivered by Tue 30 Jun
ESP32-C6 MINI Module - 4MB (PCB Antenna)
SKU: SF-WRL-24807 | Brand: SparkFun
The ESP32-C6 MINI is Espressif's compact WiFi 6 module integrating 2.4GHz Wi-Fi 6 (802.11ax), Bluetooth 5.3 (LE), and IEEE 802.15.4 (Thread/Zigbee) into a single package with an on-board PCB antenna. Built around a hi...
Delivered by Fri 19 Jun
ESP32-C6 WROOM Module - 16MB (PCB Antenna)
SKU: SF-WRL-24806 | Brand: SparkFun
The ESP32-C6-WROOM-1 is Espressif's first Wi-Fi 6 module, integrating 2.4 GHz Wi-Fi 6 (802.11ax), Bluetooth 5.3 (LE), and IEEE 802.15.4 (Thread/Zigbee) on a single chip. Built around a high-performance 32-bit RISC-V c...
Delivered by Tue 30 Jun
ESP32-H2-MINI-1 Module - 4MB Flash
SKU: AF-5716 | Brand: Adafruit
Coming soon! ESP32-H2-MINI-1 is a powerful, generic Bluetooth® Low Energy and IEEE 802.15.4 combo module that has a rich set of peripherals. This module is an ideal choice for a wide variety of application scenari...
Delivered by Thu 9 Jul
Intelligent Rain Detection Module
SKU: DF-SEN0545 | Brand: DFRobot
This smart rain sensor offers a fast way to detect rainfall change on glass in real-time free from effects like sunlight, dust, leaves, etc., and feeds back information (no rain, light rain, moderate rain, or heavy ra...
Delivered by Tue 30 Jun
MyoWare 2.0 Link Shield
SKU: SF-DEV-18425 | Brand: SparkFun
The MyoWare 2.0 Link Shield connects a MyoWare 2.0 Muscle Sensor to your Arduino microcontroller via a 3.5mm TRS cable. Simply snap the Link Shield onto your Muscle Sensor using the built-in snap connectors, connect a...
Delivered by Tue 30 Jun
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
