New Arrivals
Fresh stock, freshly listed — our New Arrivals collection is the quickest way to see what's just landed at Little Bird Electronics. From connectors and headers to sensors, modules, and maker essentials, new products are added regularly to keep your projects moving.
Whether you're a hobbyist, student, educator, or professional engineer, you'll find useful components for Arduino, Raspberry Pi, and embedded electronics projects. Shipped fast from Australia to your door.
SparkFun Ambient Light Sensor - VEML6030 (Qwiic)
SKU: SF-SEN-15436 | Brand: SparkFun
The SparkFun VEML6030 Ambient Light Sensor is a high-accuracy, 16-bit light sensor that measures ambient light in lux with a spectral response similar to the human eye. It connects via the Qwiic I2C system for solderl...
Delivered by Mon 31 Aug
SparkFun GPS Breakout - Chip Antenna, SAM-M8Q (Qwiic)
SKU: SF-GPS-15210 | Brand: SparkFun
The SparkFun SAM-M8Q GPS Breakout features a u-blox SAM-M8Q 72-channel GNSS receiver with a built-in chip antenna. It supports GPS, GLONASS, Galileo, and BeiDou constellations simultaneously, providing improved positi...
Delivered by Mon 31 Aug
SparkFun Triple Axis Magnetometer Breakout - MLX90393 (Qwiic)
SKU: SF-SEN-14571 | Brand: SparkFun
It’s time to start utilizing the superior magnetometer, and what better way than to throw it onto an easy-to-use breakout board? The SparkFun MLX90393 Magnetometer Breakout is a triple-axis magnetic sensor bo...
Delivered by Mon 31 Aug
SparkFun IR Array Breakout - 110 Degree FOV, MLX90640 (Qwiic)
SKU: SF-SEN-14843 | Brand: SparkFun
It’s time to say hip hip array for this IR Breakout! The MLX90640 SparkFun IR Array Breakout is equipped with a 32x24 array of thermopile sensors creating, in essence, a low resolution thermal imaging camera. With thi...
Delivered by Mon 31 Aug
SparkFun GPS Breakout - XA1110 (Qwiic)
SKU: SF-GPS-14414 | Brand: SparkFun
The SparkFun XA1110 GPS Breakout is a small I2C-supported module built for easy hookup, thanks to our Qwiic Connect System. Equipped with the XA1110 GPS module from GTOP, this board utilizes the MediaTek MT3333 chips...
Delivered by Thu 20 Aug
ADT7410 High Accuracy I2C Temperature Sensor Breakout Board
SKU: AF-4089 | Brand: Adafruit
Get precise temperature readings with the ADT7410 High Accuracy I2C Temperature Sensor from Analog Devices. Featuring 16-bit resolution (0.0078°C) and ±0.5°C accuracy, this breakout delivers reliable measurements over...
Delivered by Fri 11 Sep
SparkFun GPS-RTK2 Board - ZED-F9P (Qwiic)
SKU: SF-GPS-15136 | Brand: SparkFun
With GPS you are able to know where you are, where you’re going, and how to get there anywhere on Earth within 30 seconds. This means the higher the accuracy the better! GPS Real Time Kinematics (RTK) has mastered dia...
Delivered by Mon 31 Aug
Pimoroni HyperPixel - 4.0" Hi-Res Display for Raspberry Pi
SKU: AF-3578 | Brand: Adafruit
Pimoroni's HyperPixel features a 4.0" display with 800x480 18-bit color pixels and a capacitive touch overlay, making it more sensitive and responsive than a resistive touch display. The plate uses the high speed DPI ...
Delivered by Fri 11 Sep
AM2320 Digital Temperature and Humidity Sensor
SKU: AF-3721 | Brand: Adafruit
The AM2320 is a low-cost digital temperature and humidity sensor with an I2C interface — a simpler alternative to the classic DHT11/DHT22 sensors that require timing-critical bit-bang protocols. With standard I2C comm...
Delivered by Fri 11 Sep
SparkFun Human Presence Sensor Breakout - AK9753 (Qwiic)
SKU: SF-SEN-14349 | Brand: SparkFun
This is not your normal Passive Infrared (PIR) sensor! The SparkFun AK9753 Human Presence Sensor Breakout is a Qwiic-enabled, 4-channel Nondispersive Infrared (NDIR) sensor. Each channel has a different field of view...
Delivered by Mon 31 Aug
Thermocouple Amplifier with 1-Wire Breakout Board - MAX31850K
SKU: AF-1727 | Brand: Adafruit
The MAX31850K breakout board is a 1-Wire thermocouple amplifier with cold-junction compensation for K-type thermocouples. Unlike SPI-based amplifiers, the 1-Wire interface allows any number of thermocouple breakouts t...
Delivered by Fri 11 Sep
Anemometer Wind Speed Sensor w/Analog Voltage Output
SKU: AF-1733 | Brand: Adafruit
A rugged anemometer designed for outdoor wind speed measurement with a simple analog voltage output. Connect it to any microcontroller's analog input for easy wind speed readings — no complex protocols or libraries re...
Delivered by Fri 11 Sep
L3GD20H Triple-Axis Gyro Breakout Board - L3GD20/L3G4200 Upgrade [L3GD20H]
SKU: AF-1032 | Brand: Adafruit
A gyroscope is a type of sensor that can sense twisting and turning motions. Often paired with an accelerometer, you can use these to do 3D motion capture and inertial measurement (that is - you can tell how an object...
Delivered by Fri 11 Sep
SRF05 ultrasonic sensor
SKU: DF-SEN0006 | Brand: DFRobot
The latest model SRF05 Detection range of 3 cm from the original SRF04 -3 m, increased to 1 cm -4 meters. RF04 is compatible with the original. Also has smaller side lobes. Ultrasonic module can be used to identi...
Delivered by Mon 31 Aug
SRF02 ultrasonic sensor
SKU: DF-SEN0005 | Brand: DFRobot
This low cost SFR02 ultrasonic ranger has both I2C and Serial interfaces. New AutoTune algorithms intelligently back the minimum range right up to the transducer ringdown for the very best performance possible, aut...
Delivered by Mon 31 Aug
LIDAR-Lite v3
SKU: SF-SEN-14032 | Brand: SparkFun
It’s back! This is the LIDAR-Lite v3, a compact, high-performance optical distance measurement sensor from Garmin™. When space and weight requirements are tight, the LIDAR-Lite v3 soars. The LIDAR-Lite v3 is the ideal...
Delivered by Mon 31 Aug
3-Axis MEMS Accelerometer - MMA8452Q
SKU: SF-COM-10953 | Brand: SparkFun
The MMA8452Q is a low-power, 3-axis capacitive MEMS accelerometer with 12-bit resolution. Packed with embedded motion-detection functions and configurable interrupt outputs, it can monitor events autonomously while st...
Delivered by Mon 31 Aug
Adafruit Si7021 Temperature Humidity Sensor Breakout Board
SKU: AF-3251 | Brand: Adafruit
The Adafruit Si7021 is a temperature and humidity sensor from Silicon Labs with a PTFE filter for protection against dust and contaminants. It provides ±3% relative humidity accuracy over 0–80% RH and ±0.4 °C temperat...
Delivered by Fri 11 Sep
URM37 Ultrasonic Sensor for Arduino / Raspberry Pi
SKU: DF-SEN0001 | Brand: DFRobot
URM37 V4.0 Arduino Ultrasonic Sensor comes with temperature compensation which provides better distance measurement accuracy. It is very unique feature in the industry. URM37 V4.0 Arduino Ultrasonic Sensor offers ...
Delivered by Mon 31 Aug
Weather Station Kit with Anemometer/Wind Vane/Rain Bucket
SKU: DF-SEN0186 | Brand: DFRobot
INTRODUCTION Ever want to build your own weather station? This iot weather station kit includess anemometer, wind vane and rain bucket. The serial communication method provides good compatibility and ma...
Delivered by Thu 20 Aug
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
