New Arrivals

SKU: SF-SEN-11050 | Brand: SparkFun

This sealed digital temperature probe lets you precisely measure temperatures in wet environments with a simple 1-Wire interface. The DS18B20 provides 9 to 12-bit (configurable) temperature readings over a 1-Wire i...

SKU: LB-24-TEMP | Brand: Little Bird

A pre-wired DS18B20 digital temperature sensor on a breakout module with three labelled pins for easy connection. The DS18B20 uses the 1-Wire protocol, requiring only a single data line to communicate temperature read...

SKU: SF-SEN-18367 | Brand: SparkFun

A sealed, waterproof DS18B20 digital temperature probe for precise measurements in wet or harsh environments. The sensor communicates over a 1-Wire interface, requiring just one data pin (plus ground) to connect to yo...

SKU: AF-1375 | Brand: Adafruit

This breakout board is the simplest way to create a project with a single "toggle" capacitive touch sensor. No microcontroller is required here - just power with 1.8 to 5.5VDC and touch the pad to activate the sens...

SKU: EC-SPS40201S | Brand: Elecrow

This Elecrow 4-channel IR reflective sensor module combines four infrared emitter/receiver pairs with a mainboard that processes all signals. When an object enters the detection range, the corresponding channel output...

SKU: DF-TEL0119 | Brand: DFRobot

The USB/TTL Raspberry Pi GPS Tracker is a compact GPS location module built around the L80-39 chip. With 66 search channels and 22 simultaneous tracking channels, it delivers fast satellite acquisition and reliable po...

SKU: AF-1374 | Brand: Adafruit

This breakout board is the simplest way to create a project with a single "momentary" capacitive touch sensor. No microcontroller is required here - just power with 1.8 to 5.5VDC and touch the pad to activate the sens...

SKU: EF-EF05004 | Brand: ElecFreaks

It is sensitive to changes in ambient temperature and humidity and can be used for high-temperature alarms and environmental humidity detection.PlanetX DHT11

SKU: SF-KIT-19519 | Brand: SparkFun

The SparkFun 170uA PIR Breakout Starter Kit comes with everything you need to get started using Passive Infrared (PIR) sensors. PIR sensors are great for detecting motion in a small area around the sensor. The 170µA S...

SKU: DF-DFR0844 | Brand: DFRobot

After purchasing an open-source product that is not electrical level compatible, you may find that your sensor cannot work normally or even is easy to be damaged because the level of the sensor and your controller are...

SKU: DF-DFR0843 | Brand: DFRobot

After purchasing an open-source product that is not electrical level compatible, you may find that your sensor cannot work normally or even is easy to be damaged because the level of the sensor and your controller are...

SKU: SF-SEN-17372 | Brand: SparkFun

Passive Infrared (PIR) sensors are great for detecting motion in a small area around the sensor. The 170µA SparkFun EKMC4607112K PIR Breakout is a simple board equipped with an EKM-series PIR sensor from Panasonic®. T...

SKU: DF-SEN0352 | Brand: DFRobot

The DFRobot URM13 is a compact ultrasonic ranging sensor with an open single-probe design. It supports three communication methods — TRIG pulse (SR04-compatible), UART, and I2C — making it versatile for a wide range o...

SKU: EF-EF04075 | Brand: ElecFreaks

OCTOPUS Magnetic Switch is a kind of electric brick carrying magnetic switch and compatible with OCTOPUS series. It mainly consists of WBSF12 dry reed switch. WBSF12 is a dry reed tube with frequently open contact ...

SKU: AF-1362 | Brand: Adafruit

This breakout board is the simplest way to create a project with mutiple capacitive touch sensors. No microcontroller is required here - just power with 1.8 to 5.5VDC and connect up to 5 conductive pads to the 5 left-...

SKU: AF-4019 | Brand: Adafruit

If you're like me, you've dreamed of being a dolphin - smoothly gliding through the water. Using your echo-location abilities to detect tasty fish treats. Until genetic modifications catches up with our desires,...

SKU: SF-BOB-11722 | Brand: SparkFun

This is a clever little breakout board for both the RGB and R/G illuminated rotary encoders. On one side, it breaks out all of the RGB pins to standard, breadboard friendly, 0.1" headers. Turn it over and it has a foo...

SKU: AF-4007 | Brand: Adafruit

If you're like me, you've dreamed of being a dolphin - smoothly gliding through the water. Using your echo-location abilities to detect tasty fish treats. Until genetic modifications catches up with our desires, we'll...