New Arrivals

SKU: AF-364 | Brand: Adafruit

The PN532 is the most popular NFC chip, and is what is embedded in pretty much every phone or device that does NFC. It can pretty much do it all, such as read and write to tags and cards, communicate with phones (s...

SKU: SF-SEN-09836 | Brand: SparkFun

This new version adds 2 standoff holes as well as an extra decoupling capacitor. The ADXL345 is a small, thin, low power, 3-axis MEMS accelerometer with high resolution (13-bit) measurement at up to +-16 g. Digital...

SKU: LB-ABX00162 | Brand: Little Bird

Meet Arduino UNO Q — a dual-processor development board that combines a Debian-based Linux computer with a real-time microcontroller. Build robots, edge-AI systems, and connected IoT devices on a single platform where...

SKU: DF-DFR1199 | Brand: DFRobot

An all-in-one stepper motor module combining the 28BYJ-48 geared stepper with an A4988 driver on a single board. The simplified 4-pin interface (STEP, DIR, 5V, GND) connects directly to Arduino, Raspberry Pi, or ESP32...

SKU: FT-MCULABEL | Brand: Freetronics

A set of 10 self-adhesive pinout labels for ATmega328 and ATmega168 microcontrollers. Stick one on top of your DIP-package chip and instantly see the Arduino pin mapping for each physical pin — no more checking datash...

SKU: DF-SEN0641 | Brand: DFRobot

The RS485 PAR Sensor measures photosynthetically active radiation in the 400–700 nm wavelength range — the light spectrum that plants use for photosynthesis. It converts incident radiation into a signal proportional t...

SKU: DF-DFR1085 | Brand: DFRobot

##Introduction The new Arduino UNO R4 comes in two versions: the UNO R4 WiFi and the UNO R4 Minima. It runs on the Renesas RA4M1 (Arm Cortex®-M4) processor, with a clock speed of 48MHz, which provides a 3x increase ov...

SKU: DF-SEN0623 | Brand: DFRobot

The C1001 mmWave Human Detection Sensor is a high-precision 60GHz millimeter-wave radar sensor engineered for advanced human detection. Unlike standard 24GHz millimeter-wave sensors that are limited to detecting prese...

SKU: LB-PIR-CABLE | Brand: Little Bird

A compact passive infrared (PIR) motion sensor housed in a protective case with a 45cm cable. Detects motion within a 6-metre range and 120° field of view, making it ideal for security systems, automatic lighting, and...

SKU: AF-5651 | Brand: Adafruit

An I2C breakout board for the RDA5807M FM radio chip, designed by ScoutMakes as a beginner-friendly introduction to electronics and wireless communications. Tune into FM stations, display RDS data (station and song na...

SKU: PL-5030 | Brand: Pololu

The Motoron M3S256 Triple Motor Controller Shield for Arduino makes it easy to control DC motors from an Arduino or Arduino-compatible board through an I²C interface. Each module can independently control up to three ...

SKU: LB-FINCH-5 | Brand: Little Bird

Bulk pack of 5The Little Bird Finch is our smallest programmable board. The Finch is a tiny little  board designed to add flashy functionality to your project without taking up a lot of room. It has an ...

SKU: DF-SEN0371 | Brand: DFRobot

The BMP388 Digital Pressure Sensor Module is a high-accuracy barometric pressure and temperature breakout based on the Bosch BMP388. It offers significantly improved performance over its predecessors (BMP180, BMP280) ...

SKU: EC-ESP82003S | Brand: Elecrow

A compact sensor shield that pairs with an ESP8266 ESP-01 or ESP-01S module to monitor temperature and humidity over WiFi. The onboard DHT11 sensor captures environmental data, which the ESP8266 processes and uploads ...

SKU: EF-EF04079 | Brand: ElecFreaks

Octopus TMP36 Temperature Sensor Brick is a temperature sensor with low voltage and accurate celsius read. It can provide voltage output,which forms a linear relationship with celsius temperature. TMP36 do not need an...

SKU: EC-MCS01108S | Brand: Elecrow

The ELE Bluetooth Shield V1.2 adds wireless serial communication to your Arduino or Crowduino via Bluetooth V2.0+EDR. Simply stack it onto your board, select two digital pins (D0–D7) for software serial, and start sen...

SKU: AF-4413 | Brand: Adafruit

The Adafruit LSM303AGR combines a triple-axis accelerometer and triple-axis magnetometer in a single breakout board. The accelerometer measures gravity to determine which way is down, while the magnetometer senses mag...

SKU: FT-OLSH | Brand: Freetronics

Connect the 128x128 pixel OLED module to your Arduino-compatible board for a tiny, handy display with a joystick input and piezo sound output! The module can be plugged in directly on top of the shield, or connecte...

SKU: LB-LR0010 | Brand: Little Bird

Digital TempTemperature sensing module using an NTC thermistor. The output signal at ‘DO’ switches high when the preset (adjustable) temperature is reached. An analog output signal from the sensor is availab...

SKU: SF-DEV-15164 | Brand: SparkFun

The SparkFun Qwiic OpenLog is an I²C-based data logger that stores serial data to a microSD card. Based on the popular OpenLog, this version replaces the serial interface with I²C and Qwiic connectors, allowing you to...