New Arrivals
Fresh stock, freshly listed — our New Arrivals collection is the quickest way to see what's just landed at Little Bird Electronics. From connectors and headers to sensors, modules, and maker essentials, new products are added regularly to keep your projects moving.
Whether you're a hobbyist, student, educator, or professional engineer, you'll find useful components for Arduino, Raspberry Pi, and embedded electronics projects. Shipped fast from Australia to your door.
Fermion: SGP40 Air Quality Sensor (Breakout)
SKU: DF-SEN0392 | Brand: DFRobot
The SGP40 Air Quality sensor adopts the new SGP40 digital VOC sensor chip launched by the well-known Sensirion. Based on the Sensirion’s CMOSens® technology, the SGP40 offers a complete sensor system on a single chip,...
Delivered by Tue 30 Jun
Serial 6-Axis Accelerometer for Arduino
SKU: DF-SEN0386 | Brand: DFRobot
A high-precision serial 6-axis accelerometer and gyroscope module with a built-in microprocessor, Kalman filter algorithm, and attitude solver. Outputs real-time roll, pitch, and yaw angles with a static accuracy of 0...
Delivered by Tue 30 Jun
SparkFun Triple Axis Digital Accelerometer Breakout - ADXL313 (Qwiic)
SKU: SF-SEN-17241 | Brand: SparkFun
The SparkFun ADXL313 Breakout is a low power, high resolution (up to 13-bits) 3-axis accelerometer for measurement up to ±4g. This breakout measures the static acceleration of gravity in tilt-sensing applications, as ...
Delivered by Tue 30 Jun
Dual Gas CO and CH4 Detection Sensor - MQ-9B
SKU: SF-SEN-17050 | Brand: SparkFun
The MQ-9B is a CO and CH₄ gas detection sensor form Winsen. The sensing material of the MQ-9B is SnO2, which has a low conductivity in clean air. It detects carbon monoxide (1.5V) by method of cycling high and low tem...
Delivered by Tue 30 Jun
Smoke Sensor - MQ-2
SKU: SF-SEN-17049 | Brand: SparkFun
The MQ-2 is a smoke and combustible gas sensor manufactured by Winsen. It detects flammable gases and smoke in a concentration range of 300–10,000 ppm, with particularly high sensitivity to propane and smoke. It's wid...
Delivered by Tue 30 Jun
Octopus MG811 CO2 Gas Sensor
SKU: EF-EF04100 | Brand: ElecFreaks
Octopus MG811 CO2 Gas Sensor is a CO2 electronic brick in our OCTOPUS series, the basic design for the outlook, PCB fixing holes and connections are the same with them.The higher the CO2 concentration is, the lower th...
Delivered by Tue 30 Jun
Gravity: IIC Ozone Sensor (0-10ppm)
SKU: DF-SEN0321 | Brand: DFRobot
The Gravity IIC Ozone Sensor measures ozone (O₃) concentration from 0 to 10 ppm with 10 ppb resolution using an electrochemical sensing element. Factory-calibrated for accurate readings out of the box, it connects via...
Delivered by Tue 30 Jun
Adafruit H3LIS331 Ultra High Range Triple-Axis Accelerometer - STEMMA QT / Qwiic
SKU: AF-4627 | Brand: Adafruit
The Adafruit H3LIS331 is an ultra-high-range triple-axis accelerometer capable of measuring up to ±400g across all three axes. Part of the ST LIS331 family, it's designed for applications where standard ±16g accelerom...
Delivered by Fri 19 Jun
Adafruit LIS331 Triple-Axis Wide-Range ±24g Accelerometer - STEMMA QT / Qwiic
SKU: AF-4626 | Brand: Adafruit
The Adafruit LIS331 Accelerometer Breakout features the LIS331HH from ST — a triple-axis accelerometer capable of measuring up to ±24g, well beyond the ±16g limit of most standard accelerometers. It's ideal for high-i...
Delivered by Thu 9 Jul
Adafruit 9-DOF LSM9DS1 Breakout Board - STEMMA QT / Qwiic
SKU: AF-4634 | Brand: Adafruit
Add motion, direction and orientation sensing to your project with this compact STEMMA QT version of the LSM9DS1 9-DOF sensor from Adafruit. The LSM9DS1 combines a 3-axis accelerometer, 3-axis magnetometer and 3-axis ...
Delivered by Thu 9 Jul
Adafruit LPS22 Pressure Sensor - STEMMA QT / Qwiic - LPS22HB
SKU: AF-4633 | Brand: Adafruit
The Adafruit LPS22 Pressure Sensor Breakout features the ST LPS22HB — a tiny absolute barometric pressure sensor capable of measuring atmospheric pressure from 260 to 1260 hPa. Use it for weather monitoring, altitude ...
Delivered by Thu 9 Jul
SparkFun Digital Temperature Sensor - TMP102 (Qwiic)
SKU: SF-SEN-16304 | Brand: SparkFun
The SparkFun TMP102 Qwiic breakout provides accurate digital temperature readings over I2C with minimal wiring. Based on the Texas Instruments TMP102, the sensor delivers 0.0625 °C resolution and ±0.5 °C accuracy, com...
Delivered by Tue 30 Jun
Adafruit LSM6DSOX 6 DoF Accelerometer and Gyroscope - STEMMA QT / Qwiic
SKU: AF-4438 | Brand: Adafruit
The Adafruit LSM6DSOX is a high-quality 6 Degree of Freedom (6-DoF) IMU from ST, combining a triple-axis accelerometer and triple-axis gyroscope on a single chip. Beyond basic motion sensing, it includes built-in tap ...
Delivered by Thu 9 Jul
Adafruit ISM330DHCX - 6 DoF IMU - Accelerometer and Gyroscope - STEMMA QT / Qwiic
SKU: AF-4502 | Brand: Adafruit
The Adafruit ISM330DHCX is an industrial-quality 6-DoF IMU from ST, combining a 3-axis accelerometer and 3-axis gyroscope on a single silicon die for synchronised measurements. With an extended gyroscope range of ±400...
Delivered by Thu 9 Jul
Adafruit LPS33HW Water Resistant Pressure Sensor - STEMMA QT
SKU: AF-4414 | Brand: Adafruit
The Adafruit LPS33HW is a water-resistant barometric pressure sensor designed for use in harsh environments. The sensing element is housed in a ceramic package with waterproof gel protection, making it suitable for lo...
Delivered by Thu 9 Jul
Octopus Smoke Sensor MQ-2 Brick OBMQ2
SKU: EF-EF04029 | Brand: ElecFreaks
An analogue gas sensor module based on the MQ-2 sensor, part of the Octopus Electronic Bricks series for plug-and-play integration with Arduino and compatible boards. Detects a wide range of combustible gases and smok...
Delivered by Tue 30 Jun
Adafruit PCT2075 Temperature Sensor - STEMMA QT / Qwiic
SKU: AF-4369 | Brand: Adafruit
The Adafruit PCT2075 Temperature Sensor is a precise, affordable I2C temperature sensor and a drop-in replacement for the classic LM75. With an 11-bit ADC (compared to the LM75's 9-bit), it delivers finer temperature ...
Delivered by Thu 9 Jul
Adafruit HTU21D-F Temperature Humidity Sensor Breakout Board - Fully Assembled
SKU: AF-3515 | Brand: Adafruit
The Adafruit HTU21D-F is an accurate I²C digital temperature and humidity sensor breakout board. With typical humidity accuracy of ±2% (optimised for 5–95% RH) and temperature accuracy of ±1°C across -30 to 90°C, it's...
Delivered by Fri 19 Jun
MPL115A2 - I2C Barometric Pressure/Temperature Sensor
SKU: AF-992 | Brand: Adafruit
This pressure sensor from Freescale is a great low-cost sensing solution for measuring barometric pressure. At 1.5 hPa resolution, it's not as precise as our favorite pressure sensor, the BMx280 series, which has u...
Delivered by Thu 9 Jul
ADXL326 - 5V ready triple-axis accelerometer (+-16g analog out)
SKU: AF-1018 | Brand: Adafruit
A wide-range triple-axis accelerometer breakout featuring the Analog Devices ADXL326. With a ±16 g measurement range and analog outputs for X, Y, and Z axes, this sensor is ideal for detecting high-impact motion, vibr...
Delivered by Thu 9 Jul
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
