New Arrivals

SKU: EC-SEM0001T | Brand: Elecrow

*micro:bit not includedElecrow Crowtail Learning Starter Kit for Micro:bit 2.0 Graphical Programming DIY Program Modules with 20 Lessons for Beginners DescriptionThe elecrow start kit for Micro: bit can work with...

SKU: EC-ASVS1053MP | Brand: Elecrow

An Arduino-compatible MP3 shield based on the VS1053B audio codec from VLSI. It decodes all major audio formats — including MP3, OGG Vorbis, AAC, WMA, FLAC, WAV, and MIDI — and can record in Ogg Vorbis, IMA ADPCM, and...

SKU: EC-DRA43145S | Brand: Elecrow

This black acrylic case is designed to house and protect the official Raspberry Pi 7-inch touchscreen display. It consists of three layers of acrylic plate with two triangular support brackets, creating a stable, free...

SKU: AF-4494 | Brand: Adafruit

The Adafruit DPS310 is a high-precision barometric pressure and altitude sensor from Infineon, mounted on a breakout board with STEMMA QT / Qwiic connectors for solderless I2C wiring. It delivers ±1 hPa absolute accur...

SKU: MD-6A040 | Brand: Makedo

30 x SCRU - Connects up to three layers of corrugated cardboard.10 x SCRU XL - Connects up to six layers of corrugated cardboard.1 x Bonus Mini-Tool - connect cardboard as simply as righty tighty, lefty loosey

SKU: AF-4489 | Brand: Adafruit

Run two solenoids, or a single DC motor with up to 800mA per channel using the super-simple L9110H H-bridge driver. This bridge chip is an 8 DIP package so it's easy to fit onto any breadboard or perfboard.Each chip c...

SKU: SF-DEV-15795 | Brand: SparkFun

Here at SparkFun, we refuse to leave 'good enough' alone. That's why we're adding to our line-up of Arduino-compatible microcontrollers once more! The SparkFun Qwiic Pro Micro is a revision of the original Pro Micro a...

SKU: MD-5D001 | Brand: Makedo

The Makedo SCRU-DRIVER is the essential tool for connecting cardboard with Makedo SCRU and SCRU XL fasteners. Simply punch a hole through your material, insert a SCRU into the socket on the end of the SCRU-DRIVER, and...

SKU: MD-5E001 | Brand: Makedo

Introducing the Makedo SAFE-SAW JNR For independent, safe and controlled cardboard construction. CUT SAFELY:     1 x SAFE-SAW JNR Flexible plastic blade to saw cardboard, not fingers.Reverse the...

SKU: LB-TILT | Brand: Little Bird

A simple tilt sensor module that detects orientation changes. When tilted, the internal conductive ball breaks the circuit; when returned upright, it reconnects — providing a digital output signal. It's a compact, low...

SKU: EF-EF09085 | Brand: ElecFreaks

SKU: EF-EF03423 | Brand: ElecFreaks

The Ring:bit expansion board is a simple PCB for the micro:bit. The Ring:bit extends the micro:bit's 3 GPIO ports. We will use this module to convert the P0/P1/P2 port to the common GVS port. It can be loaded 3 AAA ba...

SKU: LB-KEY-MOUSE | Brand: Little Bird

A compact wireless keyboard and mouse combo using 2.4 GHz wireless technology with a unified nano receiver. The full-size keyboard features low-profile scissor-switch keys for quiet, responsive typing, while the inclu...

SKU: DF-DFR0625 | Brand: DFRobot

ESP32-PICO-KIT is a mini IoT development board with functionalities of WiFi and Bluetooth. With a size of 52x 20.3x10mm, the module integrates a 4 MB SPI flash, and a USB-UART Bridge circuit, allowing the developer...

SKU: EF-EF04092 | Brand: ElecFreaks

The Octopus Light Sensor Brick reads the ambient light level of its surrounding environment and outputs an analog signal. The 3-pin GVS connector makes it easy to plug into micro:bit expansion boards, Arduino, and oth...

SKU: DF-DFR0231-H | Brand: DFRobot

Gravity: UART & I2C NFC Module adopts NXP PN532, a highly integrated NFC communication controller, which supports various types of NFC smart cards or tags like the commonly used MIFARE Classic series and NTAG series i...

SKU: LB-EAGLED-MOMENTARY | Brand: Little Bird

A pack of 10 low-profile momentary push buttons designed for e-textile and wearable electronics projects. Each button features large sewing holes and flat connection pads with no sharp edges, making them comfortable t...

SKU: LB-JSTBOARD | Brand: Little Bird

This E-textiles board is a breakout for a JST, so you can sew it onto a garment or use it in Paper Circuits! The JST breakout board can be easily sewn through the large holes. For paper circuits, simply apply coppe...

SKU: LB-LS1347 | Brand: Little Bird

This 22-in-1 repair tool kit provides everything you need to open and disassemble smartphones, tablets, and other small electronics. Whether you're replacing a cracked screen, swapping a battery, or simply exploring w...

SKU: DF-FIT0612 | Brand: DFRobot

A 2-metre addressable RGB LED strip using WS2812 LEDs on a black flexible PCB. Each of the 120 LEDs is individually controllable via a single data line, supporting 24-bit colour (16.7 million colours) with 256 brightn...