New Arrivals

SKU: LB-LS4167 | Brand: Little Bird

This USB Male to USB Female + MicroUSB + USB-C Adapter is perfect for connecting your USB devices to your computer. It features a male USB connector on one end and a female USB connector on the other, as well as a ...

SKU: SF-PRT-26025 | Brand: SparkFun

This is a 300mm camera cable for use with MIPI displays and the Raspberry Pi 5. The Raspberry Pi 5 provides two four-lane MIPI connectors, each of which can support either a camera or a display. These connectors use t...

SKU: DF-FIT0774 | Brand: DFRobot

A compact coin-type vibration motor measuring just 10 × 2.7 mm — roughly the size of a fingernail. It delivers strong vibration with low noise and operates across a 1.5–4.2 V range, with vibration intensity increasing...

SKU: DF-DFR0848 | Brand: DFRobot

A Gravity-compatible expansion board for the Raspberry Pi Pico, breaking out all GPIO pins to labelled female headers and Gravity-standard 3-pin connectors. Provides plug-and-play access to 13 digital I/O, 3 analogue ...

SKU: DF-DFR0654-F | Brand: DFRobot

FireBeetle ESP32-E, specially designed forIoT, is an ESP-WROOM-32E-based main controller board with dual-core chips. It supports WiFi and Bluetooth dual-mode communication, and features small size, ultra-low power ...

SKU: KI-5647 | Brand: Kitronik

The Prong Soil Moisture Sensor mounts directly onto a BBC micro:bit to monitor soil moisture levels. Two conductive tines are inserted into the soil — any moisture conducts an analogue voltage that the micro:bit reads...

SKU: LB-MICROACC | Brand: Little Bird

Handy accessories to get you started with micro:bit! This  little kit has a battery pack with switch for portable projects, and a micro-USB cable to connect your micro:bit to your computer to start your coding...

SKU: AF-2780 | Brand: Adafruit

ΩMG! You're not going to be able to resist these handy resistor packs! Well, axially, they do all of the resisting for you! This is a 25 Pack of 220Ω Resistors. More specifically, they are carbon ...

SKU: AF-1578 | Brand: Adafruit

Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 500mAh for a total of about...

SKU: LB-LS6795 | Brand: Little Bird

8-90V to 5V 5A DC-DC Step-Down Converter (25W, USB-C)This compact and efficient DC-DC step-down converter is designed to take an input voltage from 8V to 90V and regulate it down to a stable 5V output at up to 5A (25W...

SKU: LB-2-PIR-AUDIO | Brand: Little Bird

Introducing our innovative Audio Player with PIR Motion Sensor, designed for seamless integration and the automatic triggering of audio alerts by motion detection. Explore the standout features of this versatile devic...

SKU: SF-DEV-16996 | Brand: SparkFun

The Teensy 4.1 is the newest iteration of the astoundingly popular development platform that features an ARM Cortex-M7 processor at 600MHz, with a NXP iMXRT1062 chip, four times larger flash memory than the 4.0, and t...

SKU: PH-TPH-017 | Brand: PiHut

The 3D RGB Xmas Tree sits on top of your Raspberry Pi and features 25 individually addressable RGB LEDs that you can control with Python. Change colours, adjust brightness, create fading effects, or build your own fes...

SKU: AF-3898 | Brand: Adafruit

Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 400mAh for a total of about...

SKU: AF-1787 | Brand: Adafruit

A quad level-shifting buffer IC that excels at converting 3V logic signals up to 5V. Power the 74AHCT125 with 5V and it will cleanly detect 3.3V logic inputs — particularly useful when connecting devices like Teensy 3...

SKU: DF-FIT0265 | Brand: DFRobot

Micro USB 2.0 to USB type A cable, a standard USB connector for cellphones, Arduino Leonardo or other embeded boards to common computer connector. This is a consumer standard, smaller connector for USB devices. Mic...

SKU: SF-SEN-13879 | Brand: SparkFun

The SparkFun Load Cell Amplifier is a small breakout board for the HX711 IC that allows you to easily read load cells to measure weight. By connecting the amplifier to your microcontroller you will be able to read the...

SKU: AF-261 | Brand: Adafruit

Red and black tinned wires with a 2-pin JST PH connector on the end. 4" / 100mm long. Matches up nicely with our Lipoly chargers! We have the socket 'mating' version of this cable over here, as well as an 'ex...

SKU: DF-SER0043 | Brand: DFRobot

INTRODUCTION The TowerPro SG90C is a 360 degree micro servo. It uses a plastic gear drive and is light and compact. It can be used for various applications and DIY products, such as toy cars, boats, windmills etc...

SKU: WS-18994 | Brand: Waveshare

A GPIO header adapter designed specifically for the Raspberry Pi 400. It connects to the Pi 400's rear GPIO header and provides a standard 40-pin breakout, making it easy to attach HATs, breadboards, and other expansi...