New Arrivals
Fresh stock, freshly listed — our New Arrivals collection is the quickest way to see what's just landed at Little Bird Electronics. From connectors and headers to sensors, modules, and maker essentials, new products are added regularly to keep your projects moving.
Whether you're a hobbyist, student, educator, or professional engineer, you'll find useful components for Arduino, Raspberry Pi, and embedded electronics projects. Shipped fast from Australia to your door.
5V Square USB Fan - 9 cm
SKU: AF-6104 | Brand: Adafruit
The largest fan in the 5V USB range, this 90mm cooling fan provides maximum airflow for electronics projects. Simply plug into any USB port for immediate cooling — no drivers or setup required. The USB connector can ...
Delivered by Mon 26 Oct
5V Brushless Portable Submersible Pump
SKU: EC-DIY19560P | Brand: Elecrow
This compact brushless submersible pump operates on 3.5–9V DC via a USB connector, making it easy to power from a USB power bank, solar panel, or development board. It delivers up to 200L/h flow and can push water up ...
Delivered by Mon 26 Oct
My Enemies Tears Lapel Pin
SKU: JU-R-E226 | Brand: Jubly-Umph
The My Enemies Tears Lapel Pin is perfect for those who want to show their support for the fight against enemy happiness. This lapel pin is made of high-quality metal and features the My Enemies Tears wording on a ...
Delivered by Mon 26 Oct
Aluminum 7 in 1 USB C Hub with USB 3.0 USB 2.0 Ports
SKU: LB-1601197103329 | Brand: Little Bird
A compact aluminium USB-C hub that expands a single USB-C port into seven outputs — including USB 3.0, USB 2.0, and USB-C ports. Plug-and-play with no drivers required, it's a convenient way to add extra connectivity ...
Delivered by Mon 26 Oct
Protective Silicone Bumper for Raspberry Pi 5
SKU: AF-6056 | Brand: Adafruit
A snap-on silicone cover that protects the base and edges of your Raspberry Pi 5 from scratches, bumps, and surface contact. Lightweight and flexible, it adds a layer of protection without adding bulk or blocking acce...
Delivered by Mon 26 Oct
Adafruit Infrared IR Remote Transceiver - STEMMA JST PH 2mm
SKU: AF-5990 | Brand: Adafruit
The Adafruit Infrared IR Remote Transceiver combines a high-powered IR transmitter and a sensitive 38 kHz IR receiver on a single board. With two 940 nm IR LEDs (one vertical, one horizontal) driven by an onboard N-ch...
Delivered by Mon 26 Oct
DFM8001 Indoor Ambient Energy Harvesting Kit (Mechanical, Thermal, Solar, RFEH)
SKU: DF-KIT0197 | Brand: DFRobot
Harnessing the abundant sources of energy in the natural environment, such as mechanical, thermal, solar, and radio frequency energy, can provide a continuous flow of power to devices. The DFM8001 Ambient Energy Harve...
Delivered by Mon 26 Oct
LED Flash Candle - Orange
SKU: LB-LS5772-O | Brand: Little Bird
An orange LED candle with a flickering flame effect that mimics the natural movement of real candlelight. Powered by a 3V battery, it's portable and safe to place anywhere — the LED stays cool to the touch, eliminatin...
Delivered by Mon 26 Oct
6W Monocrystalline Solar Panel with Toughened Glass - 5.5V
SKU: WS-24166 | Brand: Waveshare
The 6W Monocrystalline Solar Panel from Waveshare delivers 5.5V output through high-efficiency monocrystalline silicon cells, encased in toughened glass for durability and weather resistance. It features both Micro US...
Delivered by Mon 26 Oct
Arduino Power Supply 9VDC 500mA
SKU: TB-MP3146 | Brand: Little Bird
Introducing our new range of Ultra-slim Switchmode AC adaptors. They are extremely light, sleek and compact; enough to snugly and neatly fit side by side on a power board, no more wasted AC outlets! Incorporates a ...
Delivered by Mon 26 Oct
SC3336 3MP Camera Module (B), With High Sensitivity, High SNR, and Low Light Performance, Compatible With LuckFox Pico Series Boards
SKU: WS-25553 | Brand: Waveshare
A 3 MP camera module built around the SmartSens SC3336 sensor, designed for use with LuckFox Pico series boards. The 1/2.8" CMOS sensor delivers high-sensitivity, high-SNR imaging with strong low-light performance, ma...
Delivered by Mon 26 Oct
Fermion: MEMS Carbon Monoxide CO Gas Detection Sensor (Breakout, 5-5000ppm)
SKU: DF-SEN0564 | Brand: DFRobot
The Fermion MEMS Carbon Monoxide Sensor uses micro-electromechanical system (MEMS) technology to detect CO gas concentrations from 5 to 5,000 ppm. Its compact size, low power consumption, short preheat time, and fast ...
Delivered by Mon 26 Oct
ELECFREAKS Raspberry Pi Pico Starter Kit
SKU: EF-EF08278 | Brand: ElecFreaks
Raspberry Pi Pico Starter Kit is an electronic starter kit that is designed for Raspberry Pico. The kit provides some basic electronic components such as LEDs, buttons, and photo-diode, it helps you enter a wonderful ...
Delivered by Mon 26 Oct
HDMI Cable 8K 60Hz 1.5M
SKU: LB-LS5174 | Brand: Little Bird
An HDMI 2.1 cable supporting resolutions up to 8K at 60 Hz, with backward compatibility for 4K at 120 Hz and lower resolutions. Constructed with PVC-jacketed copper conductors for reliable signal transmission. Specif...
Delivered by Mon 26 Oct
Adafruit TRRS Jack Breakout Board
SKU: AF-5764 | Brand: Adafruit
The Adafruit TRRS Jack Breakout Board provides easy access to all four contacts of a 3.5mm TRRS (Tip-Ring-Ring-Sleeve) audio jack — commonly used for stereo audio plus a microphone channel, as found on mobile phone he...
Delivered by Mon 26 Oct
PCB holder
SKU: LB-LS4650 | Brand: Little Bird
This flat, dense PCB holder is designed to keep your circuit board steady while you work. Its low-profile vise style lets your hands rest directly on the work table, making it easier to steady yourself during precise ...
Delivered by Mon 26 Oct
Science Has The Best Solutions Lapel Pin
SKU: JU-W-LP232 | Brand: Jubly-Umph
Are you a proud supporter of science? Do you believe in its potential to make the world a better place? This enamel pin is a subtle reminder to always seek out evidence-based solutions and to trust in the power of ...
Delivered by Mon 26 Oct
Snap Action 5-to-5 Wiring Block Connector
SKU: AF-5617 | Brand: Adafruit
Snap action blocks are perfect when you have to quickly wire up a bunch of free-hanging components, and you don't want to solder. They're much easier to use than wire nuts, and of course, they are reuseable and do not...
Delivered by Mon 26 Oct
SparkFun IoT RedBoard - ESP32 Development Board
SKU: SF-WRL-19177 | Brand: SparkFun
The SparkFun IoT RedBoard is an ESP32 Development Board that includes everything but the kitchen sink! Espressif's ESP32 WROOM is a powerful WiFi and Bluetooth® MCU module that targets a wide variety of application...
Delivered by Mon 26 Oct
I2C Temperature & Humidity Sensor (Stainless Steel Shell)
SKU: DF-SEN0546 | Brand: DFRobot
This I2C digital temperature & humidity sensor offers high accuracy of ±3.0RH% for humidity and ±0.5°C for temperature and features a user-programmable humidity & temperature alarm function.Its housing is made of 304 ...
Delivered by Mon 26 Oct
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared