New Arrivals

SKU: AF-354 | Brand: Adafruit

Need a big battery for your project? This lithium ion pack is made of 2 balanced 2200mAh cells for a total of 4400mA capacity! The cells are connected in parallel and spot-welded to a protection circuit that provid...

SKU: SF-PRT-11026 | Brand: SparkFun

If you need to knock up a quick prototype there’s nothing like having a pile of jumper wires to speed things up, and let’s face it: sometimes you want quantity over quality. These are the same jumper wires that com...

SKU: SF-PRT-12796 | Brand: SparkFun

These are 6" long jumper wires with female connectors on both ends. Use these to jumper from any male header on any board, to any other male header. Combine these with our male to male jumpers to create a male to f...

SKU: AF-1919 | Brand: Adafruit

These female-to-female jumper wires bridge the gap between standard 2.54 mm (0.1″) pitch headers and smaller 2.0 mm (0.08″) pitch connectors. One end has a 2.54 mm socket and the other has a 2.0 mm socket, making it e...

SKU: AF-1980 | Brand: Adafruit

The Adafruit TSL2591 is an ultra-high-range digital light sensor with a massive 600,000,000:1 dynamic range. It features both infrared and full-spectrum photodiodes, allowing you to separately measure infrared, full-s...

SKU: AF-1988 | Brand: Adafruit

That new Raspberry Pi® Model B+ computer you just got has a row of 2x20 pin headers soldered on - those are the GPIO (general purpose input/output) pins and for those of us who like to hack electronics they are where ...

SKU: AF-3405 | Brand: Adafruit

The Adafruit HUZZAH32 ESP32 Feather Board brings the powerful Espressif ESP32 dual-core processor into the Adafruit Feather form factor. With WiFi, Bluetooth Classic, and BLE support, a built-in USB-to-serial converte...

SKU: AF-830 | Brand: Adafruit

A 4×AA battery holder with a snap-on cover and built-in on/off switch. Holds four AA batteries in series, outputting a nominal 6V (alkaline) or 4.8V (NiMH), making it a convenient portable power source for 5V microcon...

SKU: AF-1954 | Brand: Adafruit

These Female/Male Extension jumper wires are handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 6" (150mm) long and come in a 'strip' of 20 (2 pieces of ea...

SKU: AF-3500 | Brand: Adafruit

The Adafruit Trinket M0 is a tiny but powerful microcontroller board built around the ATSAMD21E18 32-bit Cortex M0+ processor. It shares the same compact form factor and pinout as the original Trinket, but with a mass...

SKU: ET-1734946 | Brand: Little Bird

This 3 metre Cat5e network lead is a straightforward way to connect a Raspberry Pi or other Ethernet-ready device to a router, switch or network point.It has RJ45 plugs on both ends, so it suits standard wired network...

SKU: LB-LS4380 | Brand: Little Bird

This is an FM Radio Amplifier Mono FM Music Player, designed as a handmade wooden assembly experimental equipment. It features a wooden casing, providing a primitive and rustic design for an FM radio. I...

SKU: PI-PIM724 | Brand: Pimoroni

A top of the line Pirate-brand RP2350 microcontroller with 16MB of flash memory, 8MB of PSRAM, USB-C, Qw/ST and debug connectors.We adore the versatility and value of Raspberry Pi Pico but we also enjoy a souped up RP...

SKU: LB-LS6105 | Brand: Little Bird

A hands-on STEM kit that lets kids build their own hand-cranked electricity generator. By turning the crank, children generate real electrical power, providing a practical demonstration of how mechanical energy conver...

SKU: KS-KS0576 | Brand: Keyestudio

Introducing the Smart Eco-Friendly House Starter Kit for Arduino, the perfect way to learn about automated and intelligent management while also promoting eco-friendliness. This kit utilizes multiple sensors and modul...

SKU: DF-DFR0181 | Brand: DFRobot

This is the new Arduino Uno Rev 3. In addition to all the features of the previous board, the arduino Uno Rev 3 now uses an ATmega16U2 instead of the 8U2 found on the Uno (or the FTDI found on previous generations). T...

SKU: WS-26541 | Brand: Waveshare

Unlock the full potential of IoT development with the cutting-edge ESP32-S3 Development Board, your all-in-one solution for creating interactive and smart connected devices. This powerhouse board is designed by Wavesh...

SKU: WS-26462 | Brand: Waveshare

A programmable 3-key macro keyboard powered by the RP2040 microcontroller. Out of the box, the keys are mapped to Ctrl, C, and V — the essential copy-paste combo for programmers — but all three keys can be reprogramme...

SKU: WS-25512 | Brand: Waveshare

A 1.54-inch OLED display module with 128×64 resolution and white pixels on a black background. Built around the SSD1309 driver chip, it supports both 4-wire SPI and I2C interfaces and includes an onboard voltage trans...

SKU: WS-25506 | Brand: Waveshare

Waveshare RP2040-PiZero Development Board, Based On The Raspberry Pi RP2040 Dual-core Processor, 264KB SRAM and 16MB onboard Flash memory, compatible with Raspberry Pi 40PIN GPIO header RP2040-PiZero Development Bo...