New Arrivals

SKU: SF-PRT-13875 | Brand: SparkFun

This is a simple 3 pin female PTH header. This header is in a configuration that makes it ideal to be used with the MyoWare Muscle Sensor line. Each pin has a spacing of 0.1" in between each other. Documents: Da...

SKU: SF-BOB-00500 | Brand: SparkFun

8, 16, 20, and 28-Pin SSOP to DIP break out boards. The footprint was rotated to accommodate different width SSOP devices and can be used with any pin count up to 28 pins. Designed to be used with 0.65mm pitch devi...

SKU: DF-FIT0333 | Brand: DFRobot

A lightweight, thin, and truly flexible solar panel rated at 1.5V / 250mA (0.5W). Unlike rigid solar panels, this one can be bent, sewn, or adhered to curved surfaces, making it perfect for wearable electronics, porta...

SKU: SF-COM-00523 | Brand: SparkFun

High-quality radial electrolytic capacitors rated at 10µF / 25V. These low-profile decoupling capacitors are essential components for smoothing power supply noise, suppressing transients, and stabilising voltage in a ...

SKU: SF-WRL-11812 | Brand: SparkFun

This is a simple to use, USB to serial base unit for the Digi XBee line. This unit works with all XBee modules including the Series 1 and Series 2.5, standard and Pro version. Plug the unit into the XBee Explorer, att...

SKU: SF-BOB-00497 | Brand: SparkFun

8-Pin SSOP to DIP break out board. The footprint was rotated to accommodate different width SSOP devices and can be used with 8 pin SSOPs. Designed to be used with 0.65mm pitch devices but can also be used with 0.0...

SKU: AF-2972 | Brand: Adafruit

This 9×16 Charlieplexed LED matrix features green LEDs arranged in a grid designed to pair with the Adafruit IS31FL3731 16×9 Charlieplexed PWM LED Matrix Driver. With 144 individual LEDs in a compact package, it's ide...

SKU: SF-SEN-00250 | Brand: SparkFun

10K thermistor with a negative temperature coefficient. Good choice for temp-sensing applications when you need a reliable NTC thermistor. Vishay part #: NTCLE100E3103JB0 Note: You get only one thermistor. Document...

SKU: PL-1185 | Brand: Pololu

The ACS714 Current Sensor Carrier provides a compact breakout for Allegro's ±5A ACS714 Hall effect-based linear current sensor. It offers a low-resistance (~1.2 mΩ) current path and electrical isolation up to 2.1 kV R...

SKU: SF-COM-00105 | Brand: SparkFun

Ever hear of a thing called RGB? Red, Green, Blue? How about an RGB LED? These 5mm units have four pins - Cathode is the longest pin. One for each color and a common cathode. Use this one LED for three status indic...

SKU: SF-SEN-13763 | Brand: SparkFun

A low-cost, highly accurate digital humidity and temperature sensor breakout board based on the Silicon Labs Si7021. Communicates over I²C with just two data lines, providing relative humidity and precise temperature ...

SKU: AF-80 | Brand: Adafruit

A high-quality 9V battery clip with a pre-assembled 5.5mm/2.1mm centre-positive barrel connector. The moulded plastic clip covers the battery terminals to prevent short circuits, and the barrel plug connects directly ...

SKU: SF-CAB-11579 | Brand: SparkFun

Behold, the Hydra! This USB power cable probably looks a lot like something you’ve hacked together before. We do it all the time, because what is a computer if not a 5V power supply that happens to run software? T...

SKU: PL-1137 | Brand: Pololu

The GP2Y0A02 is the longest-range optical distance sensor we carry, featuring a detection range of 8″ to 60″ (20 cm to 150 cm). The high maximum detection distance makes this sensor a viable alternative to ...

SKU: DF-SEN0134 | Brand: DFRobot

The Gravity MQ-9 gas sensor detects carbon monoxide (CO) and combustible gases including methane and propane. It uses a semiconductor SnO2 sensing element that cycles between high and low temperatures — detecting CO a...

SKU: AF-145 | Brand: Adafruit

If you want to make a kit you'll need some solder. This 100g (about 1/4 lb) spool is just the right amount, not too much (like 1 lb spools) and not too little (like those little 'pocket clip' vials). 0.031" diameter, ...

SKU: AF-146 | Brand: Adafruit

Simple needlenose pliers for twisting, pulling and pliering your project.

SKU: SF-COM-11409 | Brand: SparkFun

This 20mm 4-digit 7-segment display in white is a mid-size option — large enough to read from a distance but compact enough to fit in most enclosures. The common-cathode display features four 7-segment digits with one...

SKU: SF-COM-11408 | Brand: SparkFun

This 20mm 4-digit 7-segment display in blue is a mid-size option — large enough to read from a distance but compact enough to fit in most enclosures. The common-cathode display features four 7-segment digits with one ...

SKU: AF-245 | Brand: Adafruit

The 2-Axis Joystick provides analogue input for your projects using two independent 10K potentiometers — one per axis. It reports position as either voltage or resistance, making it compatible with a wide range of mic...