New Arrivals

SKU: SF-COM-09609 | Brand: SparkFun

This is a simple SPDT slide switch - great for use as an ON/OFF button, or just as a general control switch. The pins are spaced by 0.1", however they are incredibly thin making breadboard use not recommended. The swi...

SKU: DF-FIT0980 | Brand: DFRobot

Keep your Raspberry Pi 5 running cool with this aluminium alloy cooling fan. Designed for the Pi 5's dedicated fan interface, it plugs in directly via a 4-pin JST connector — no complicated setup required. Self-locki...

SKU: PI-PIM721 | Brand: Pimoroni

The Tiny 2350 is a postage-stamp-sized development board powered by the RP2350A — a dual ARM Cortex-M33 running at up to 150 MHz with 520 KB SRAM and 4 MB of QSPI flash. It's programmable via USB-C with C/C++ or Micro...

SKU: LB-00191-20 | Brand: Little Bird

A classroom-ready bulk pack of 20 BBC micro:bit v2.2 boards. Each micro:bit features a built-in speaker, microphone, touch sensor, accelerometer, compass, Bluetooth, and a 5×5 LED matrix — everything students need to ...

SKU: AF-4669 | Brand: Adafruit

Here's one of the easiest capture solutions for getting HDMI data into your computer or Raspberry Pi, really any system with a USB port. Use this capture device to convert a video signal from a camera (or another dev...

SKU: EC-MCS02930M | Brand: Elecrow

This Adruino compatible motor Driver shield is a full-featured products that it can be used to drive 4 DC motor or two 4-wire stepper and two 5v servo. It drive the DC motor and stepper with the L293D,and it drive ...

SKU: AF-3896 | Brand: Adafruit

A 3-bladed trifoil propeller designed to snap onto standard DC hobby motors. Great for making simple fans, wind-powered experiments, bubble machines, or lightweight propulsion projects. Key Features Snap-On Fit – P...

SKU: DF-DFR0478 | Brand: DFRobot

DFRobot FireBeetle series is the low-power consumption micro-controller intentionally designed for Internet of Things (IoT) projects. FireBeetle Board - ESP32 integrates a Dual-Core ESP-WROOM-32 module, which suppo...

SKU: SF-PRT-14490 | Brand: SparkFun

Standard 330 Ω through-hole resistors rated at ¼ W with ±5% tolerance. These thick-lead versions fit securely into breadboards with minimal movement, making them reliable for prototyping. 330 Ω resistors are commonly...

SKU: SF-TOL-09325 | Brand: SparkFun

This is your basic spool of lead free solder with a water soluble resin core. 0.031" gauge and 100 grams. This is a good spool for more advanced users that should last 6-12 months depending on how often you solder....

SKU: SF-COM-09181 | Brand: SparkFun

It’s the end of the world, and you need a button to press. This is it. A 100mm diameter (outside diameter) dome illuminated push button comes with an LED, securing nut and a pre-installed long life horizontal micro...

SKU: SF-DEV-11791 | Brand: SparkFun

This is about 360 yards of conductive thread spun from stainless steel fiber and wound on a spool. You can use it as a creative way to connect various electronics onto clothing projects. This large spool is a great...

SKU: SF-COM-11508 | Brand: SparkFun

1/6th Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and perf boards, these 10K resistors make excellent pull-ups, pull-downs, and current limiters. We’ve opted for a new and more breadboard-fri...

SKU: AF-3297 | Brand: Adafruit

The Adafruit DRV8833 is a dual H-bridge motor driver breakout, capable of driving two DC motors bidirectionally or one bipolar/unipolar stepper motor at up to 1.2 A per channel. It's well suited for low-voltage applic...

SKU: AF-3351 | Brand: Adafruit

Listen up! This 2.8" x 1.2" speaker is a great addition to any audio project where you need 4 ohm impedance and 3W or less of power. We particularly like this speaker as it is small...

SKU: WS-19979 | Brand: Waveshare

The 2-Channel RS232 Module for Raspberry Pi Pico converts UART signals to RS232 and vice versa using the SP3232EEN transceiver. It plugs directly onto the Pico via the onboard female pin header — no wiring required. ...

SKU: EF-EF08297 | Brand: ElecFreaks

The Classroom Smart Home Kit includes components such as an IOT:bit expansion board, crash sensor, 180-degree servo, rainbow LED, noise sensor, light sensor, and OLED display. These components enable a wealth of funct...

SKU: AF-5046 | Brand: Adafruit

The BME688 from Bosch delivers comprehensive environmental sensing in a single compact package. This precision sensor measures temperature, humidity, barometric pressure, and VOC gas levels, all accessible over I2C or...

SKU: DF-FIT0860 | Brand: DFRobot

This small portable USB isolator with USB2.0 compatibility provides complete isolation between devices.  Featuring a 12Mbps data transmission rate and 2500V isolation voltage, the industrial USB isolator can ...

SKU: WS-14718 | Brand: Waveshare

A 1.8" colour display module designed for the BBC micro:bit, featuring 160 × 128 resolution and 65K colour support. It plugs directly into the micro:bit edge connector — no soldering required. The module includes onb...