New Arrivals
Fresh stock, freshly listed — our New Arrivals collection is the quickest way to see what's just landed at Little Bird Electronics. From connectors and headers to sensors, modules, and maker essentials, new products are added regularly to keep your projects moving.
Whether you're a hobbyist, student, educator, or professional engineer, you'll find useful components for Arduino, Raspberry Pi, and embedded electronics projects. Shipped fast from Australia to your door.
IR Sensor Module
SKU: LB-OWL-IR | Brand: Little Bird
An infrared receiver module that can read signals from most standard IR remote controls. Useful for adding remote control functionality to Arduino and microcontroller projects. Pair with an IR transmitter module to bu...
Delivered by Thu 20 Aug
Mini PIR Motion Sensor
SKU: LB-LS0869 | Brand: Little Bird
The AM312 sensor is a mini IR pyroelectric infrared PIR motion human body sensor that is easy to install and has low power consumption. Its digital signal processing and high sensitivity make it ideal for use in au...
Delivered by Thu 20 Aug
UV Ultraviolet Ray Detection Sensor
SKU: LB-LS2299 | Brand: Little Bird
A UV detection sensor module that measures ultraviolet light intensity in the 200–370 nm wavelength range. The analogue output (0–1 V DC) is proportional to the UV Index, making it suitable for measuring UV exposure i...
Delivered by Thu 20 Aug
Adafruit Micro SD SPI or SDIO Card Breakout Board - 3V ONLY!
SKU: AF-4682 | Brand: Adafruit
The Adafruit Micro SD SPI or SDIO Card Breakout Board gives you fast microSD card access using either standard SPI or the higher-speed SDIO protocol. Unlike SPI-only breakouts, this board exposes the full SDIO bus wit...
Delivered by Thu 20 Aug
WiFi Module ESP8266 ESP-01
SKU: LB-LR0307 | Brand: Little Bird
Upgraded Version ESP-01,all Flash are upgraded to 1M byte.Also support Cloud service remote transmission.This Upgraded Version module are fully supports the previous firmware The latest firmware version 1.0.1, the ...
Delivered by Thu 20 Aug
VL53L0X Time-of-Flight (ToF) Laser Ranging Sensor - GY-530
SKU: LB-LS6503 | Brand: Little Bird
The VL53L0X Time-of-Flight (ToF) Laser Ranging Sensor is an advanced distance sensor module that provides highly accurate distance measurements using infrared laser technology. With a range of up to 2 meters, this com...
Delivered by Thu 20 Aug
10DOF Module MPU6050 HMC5883L BMP180 GY87 Sensor Module
SKU: LB-LS5114 | Brand: Little Bird
The GY-87 is a 10 degrees-of-freedom (10DOF) sensor module that combines three chips on a single compact board: the MPU6050 (3-axis gyroscope + 3-axis accelerometer), HMC5883L (3-axis magnetometer), and BMP180 (barome...
Delivered by Thu 20 Aug
DC-DC 12V To 3.3V 5V Buck Step down Power Supply Module For Arduino
SKU: LB-LR0214-142A | Brand: Little Bird
One input: DC 6V - 12V (input voltage to the output voltage must be higher than 1V.) Output: 3.3V (+ - 0.05v error), 5.0V (+ - 0.05v error), 800mA (load current can not exceed 800ma), 12V (12V input directly conv...
Delivered by Thu 20 Aug
I2C 20x4(2004) LCD Display for Arduino
SKU: DF-DFR0154 | Brand: DFRobot
A 20×4 character I2C LCD display module compatible with Arduino and other microcontrollers. It shows white characters on a blue backlit background, and the I2C interface means you only need two data pins (SDA and SCL)...
Delivered by Thu 20 Aug
ThinkNode M2 Meshtastic (LoRa) Signal Transceiver Powered By ESP32-S3 With 1.3” OLED Display - (Without Battery)
SKU: EC-CIL13002M2 | Brand: Elecrow
Elecrow ThinkNode-M2 is a high-performance LoRa signal transceiver. It uses the ESP32-S3 module as the main processor and supports Bluetooth. Users can easily configure and monitor the device through their mobile pho...
Delivered by Thu 20 Aug
DC-DC Multi-output Buck Converter (3.3V/5V/9V/12V)
SKU: DF-DFR1015 | Brand: DFRobot
Multiple-output DC–DC converters are essential in a multitude of applications where different DC output voltages are required.This DC-DC step-down voltage power module converts 7.5V~30V input to an output of 3.3V/5V/9...
Delivered by Thu 20 Aug
Sonar:bit for micro:bit Ultrasonic Sensor Distance Measuring 3V/5V
SKU: EF-EF04089 | Brand: ElecFreaks
Sonar:bit is a 3-wire ultrasonic distance sensor designed for micro:bit and Arduino projects. Operating on 3–5V, it works directly with both 3.3V and 5V systems using a single GVS cable — saving an I/O port compared t...
Delivered by Thu 20 Aug
Arduino Infra-red obstacle sensor
SKU: LB-LR0006 | Brand: Little Bird
The infrared obstacle sensor is a compact IR proximity module designed for robotics and automation projects. It detects obstacles within a 2–40 cm range and outputs a TTL-level signal, making it easy to integrate with...
Delivered by Thu 20 Aug
Capacitive Touch Sensor for Arduino
SKU: LB-LR0214-47 | Brand: Little Bird
This is a touch sensor for Arduino. This sensor is a toggle output type: touch-on then touch-off. Onboard TTP223 touch capacitive touch sensor IC. With an on-board-level status indicator. Wor...
Delivered by Thu 20 Aug
RS232 To TTL Converter Module MAX3232
SKU: EC-CIN3232RT | Brand: Elecrow
This module can be used to convert the RS232 voltage of PC to TTL voltage that used by microcontroller. Directly plug the DB9 connector your PC then you can communicate with the microcontrollers using the Serial port....
Delivered by Thu 20 Aug
MLX90640 Thermal Camera Breakout - Standard (55°)
SKU: PR-PIM365 | Brand: Little Bird
A sophisticated, hackable, 32x24 pixel thermal camera breakout! Use it to monitor the temperature of your CPU or coffee pot, or to build your own heat-seeking night vision camera. Works with Raspberry Pi or Ardu...
Delivered by Thu 20 Aug
VL53L1X Time of Flight (ToF) Sensor Breakout
SKU: PR-PIM373 | Brand: Little Bird
The VL53L1X Time of Flight sensor breakout uses a low-power laser to measure distances with excellent accuracy and speed. With a detection range of 4 cm to 4 metres and up to 50 Hz sampling frequency, it's ideal for p...
Delivered by Thu 20 Aug
Little Bird Toucan 8 x APA102 RGB LED
SKU: LB-TOUCAN | Brand: Little Bird
The Little Bird Toucan is an smart RGB LED HAT designed for the Raspberry Pi!Based on the APA102, the Toucan packs 8 super-bright LEDs.Each of the LEDs are dimmable, and individually controllable (Raspberry Pi Rain...
Delivered by Thu 20 Aug
Adafruit BME688 - Temperature, Humidity, Pressure and Gas Sensor
SKU: AF-5046 | Brand: Adafruit
The BME688 from Bosch delivers comprehensive environmental sensing in a single compact package. This precision sensor measures temperature, humidity, barometric pressure, and VOC gas levels, all accessible over I2C or...
Delivered by Thu 20 Aug
Stereo Bluetooth Amplifier Board
SKU: DF-DFR0675-EN | Brand: DFRobot
This is a small size and cost-effective Bluetooth 5.0 digital amplifier module with a volume adjustment function. It can connect to two speakers and match a wide variety of high-power speakers (40W-200W). This boar...
Delivered by Thu 20 Aug
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared