LEDs

SKU: LB-LS5772-G | Brand: Little Bird

A harmonious blend of traditional charm and modern technology designed to illuminate your spaces with a warm, flickering glow reminiscent of real candlelight. Meticulously crafted to capture the essence of classic Edi...

SKU: AF-4120 | Brand: Adafruit

The Adafruit CharliePlex LED Matrix Bonnet features a 16×8 grid of green LEDs driven by the IS31FL3731 charlieplex driver over I2C. Simply plug it onto any Raspberry Pi with a 2×20 header for a bright, programmable 12...

SKU: SF-COM-18566 | Brand: SparkFun

We are quite familiar with seven-segment displays. We see them on our alarm clocks, ovens, and microwaves. By adding more segments to each digit you can display more than just numbers! Introducing the brand new SparkF...

SKU: SF-BOB-16842 | Brand: SparkFun

Buttons are an easy and tactile way to interface with your project, but why would you want to deal with debouncing, polling, and wiring up pull-up resistors? The Qwiic Button with built-in green LED simplifies all of ...

SKU: AF-560 | Brand: Adafruit

These chrome-plated metal buttons are rugged and look real good while doing it! Simply drill a 16mm hole into any material up to 1/2" thick and you can fit these in place, there's even a rubber gasket to keep&nbs...

SKU: SF-COM-11968 | Brand: SparkFun

A heavy-duty, panel-mount momentary pushbutton with an illuminated green LED ring. Built from stainless steel with IP65 weatherproofing, this 16 mm threaded switch is tamper-resistant and designed for demanding enviro...

SKU: AF-2993 | Brand: Adafruit

A tri-colour tower light with red, yellow, and green LED segments plus a built-in buzzer, powered by 12V DC. Each light and the buzzer are independently controlled via separate wires, making it easy to indicate machin...

SKU: EF-EF05010 | Brand: ElecFreaks

A green LED module from the ELECFREAKS PlanetX sensor range, designed for use with micro:bit and the Nezha expansion board. The RJ11 connector makes it simple to plug in — no soldering or breadboard required. Control...

SKU: AF-5920 | Brand: Adafruit

A 1-metre flexible LED strip with 480 green SMT LEDs per metre, soldered side-by-side in a "chip on board" configuration. Topped with a translucent silicone diffuser and encased in a sealed silicone tube, the result i...

SKU: AF-5435 | Brand: Adafruit

A miniature traffic light standing 6.5 cm tall, featuring red, yellow, and green LEDs. Perfect for dioramas, model sets, dollhouses, and electronics learning projects. The LEDs are common anode — connect 3–6V to the b...

SKU: DF-DFR0789 | Brand: DFRobot

This is a simple LED-illuminated self-lock switch button. It’s just like a basic switch button, but it lights up color(red/yellow/green/blue/white) when pressed down, which gives you visual feedback. These little butt...

SKU: AF-5167 | Brand: Adafruit

If you have one of our etched glow-through keycaps, this adorable, bite-sized Key Switch Keychain is the perfect accessory to show it off. It's basically a satisfying clicky tactile key switch, with a green LED and a ...

SKU: EF-EF04064 | Brand: ElecFreaks

Octopus Electronic Bricks, you can use them build electronics projects just as easy as piling bricks. By using Octopus electronic bricks, you may connect Arduino/Freaduino compatible boards easily with various digi...

SKU: EF-EF04062 | Brand: ElecFreaks

A green 5 mm LED module from the Octopus Electronic Bricks range. It connects to Arduino or micro:bit via a 3-pin sensor cable for breadboard-free, plug-and-play wiring. Control it with a digital pin (LOW = on, HIGH =...

SKU: AF-3868 | Brand: Adafruit

Here at Adafruit we love discovering new and exotic glowing things. Like moths to the flame, we were intrigued by these fresh Flexible Silicone Neon-Like LED Strips! They look a lot like neon, but without the ...

SKU: AF-3151 | Brand: Adafruit

The Adafruit 0.8" 8x16 LED Matrix FeatherWing Display Kit in green pairs two miniature 8x8 LED matrices with a FeatherWing driver board to create a 128-pixel display for any Feather microcontroller. Use it for scrolli...

SKU: AF-3136 | Brand: Adafruit

The Adafruit 15×7 CharliePlex LED Matrix FeatherWing in Green adds a bright, compact 105-LED grid to any Feather board. The onboard IS31FL3731 driver handles all the charlieplexing over I2C, with 8-bit (256-level) PWM...

SKU: PI-COM0510 | Brand: Pimoroni

The Lite-On LTP-305 LED matrices have quite a heritage! They were first developed in 1971 by Texas Instruments, but subsequently have been manufactured by Lite-On. They're available in two suitably retro colours ...

SKU: SF-COM-00682 | Brand: SparkFun

LED Matrix with Bright-Red and Bright-Green LEDs. This medium matrix has 64 Red/Green LEDs built into one common cathode housing. Unit comes with a black finish and a opaque LED lenses. Features: 0.33 x 2 x 2" ...

SKU: AF-2035 | Brand: Adafruit

A 16×8 LED matrix backpack kit featuring two ultra-bright 1.2" green 8×8 round LED matrices on a single I2C-controlled driver board. The HT16K33 chip handles all the multiplexing, so you only need two I2C pins (SDA an...