LEDs & NeoPixels

SKU: AF-5225 | Brand: Adafruit

Need to add little dots of colour to a costume, wearable, or structure? The Adafruit NeoPixel Slim LED Dot Strand uses soft plastic cords of plated wire instead of a rigid PCB, making it easy to embed, sew over, or ca...

SKU: AF-3467 | Brand: Adafruit

The Adafruit CharliePlex LED Matrix Bonnet features a 16×8 grid of blue LEDs driven by the IS31FL3731 charlieplex driver over I2C. Simply plug it onto any Raspberry Pi with a 2×20 header for a bright, programmable 128...

SKU: SF-COM-18354 | Brand: SparkFun

The SparkFun Qwiic LED Stick features ten addressable APA102 LEDs, making it easy to add full color LED control using I2C. Write to individual LEDs to display a count in binary, or write to the whole strip for cool li...

SKU: DF-FIT0750 | Brand: DFRobot

This 50cm programmable RGB LED strip uses SK6812 (5050) COB LEDs to produce bright, uniform, full-colour light with no visible hotspots. With 166 individually addressable LEDs packed into just half a metre, it deliver...

SKU: AF-4892 | Brand: Adafruit

These incredibly small and slim surface-mount NeoPixel LEDs are an easy way to add a lot of very tiny (but bright!) colorful baguette diamond LEDs to your project. They are just 3.2mm x 1.0mm x 1.48mm and ca...

SKU: AF-4860 | Brand: Adafruit

The Adafruit Prop-Maker Starter Kit contains the electronics you need to build a 3D-printed NeoPixel lightsaber with motion-activated lighting and full sound effects. The kit pairs the Feather M4 Express with the Prop...

SKU: AF-4840 | Brand: Adafruit

Here at Adafruit we love discovering new and exotic glowing things. Like moths to the flame, we were intrigued by these 'chip on board' ultra-flexible white LED Strips with 480 SMT LEDs per meter, soldered side-by-sid...

SKU: AF-4702 | Brand: Adafruit

The Adafruit RGB Matrix FeatherWing Kit for nRF52840 lets you drive HUB75-type RGB LED matrices from nRF52840-based Feather boards. With built-in power regulation and a compact form factor, it's the easiest way to cre...

SKU: EF-EF04064 | Brand: ElecFreaks

Octopus Electronic Bricks, you can use them build electronics projects just as easy as piling bricks. By using Octopus electronic bricks, you may connect Arduino/Freaduino compatible boards easily with various digi...

SKU: EC-AS402812NP | Brand: Elecrow

This is the NeoPixel Shield from Duinofun. This Arduino shield is equipped with 40 WS2812 RGB LEDs arranged in an 5x8 matrix with on one pin (Digital #6) needed to control them all.Each shield is powered by the 5V onb...

SKU: AF-4560 | Brand: Adafruit

The Adafruit Soft Flexible Wire NeoPixel Strand features 50 individually addressable RGB LEDs spaced approximately 100 mm (~4") apart on soft, plated wire. Unlike traditional flexible PCB strips that can crack when be...

SKU: AF-4549 | Brand: Adafruit

A flexible, neon-like RGBW LED strip encased in translucent silicone rubber for a smooth, diffused glow. This 1-metre strip produces a neon-style effect without the need for glass tubing or high-voltage transformers —...

SKU: AF-4548 | Brand: Adafruit

Here at Adafruit we love discovering new and exotic glowing things. Like moths to the flame, we were intrigued by these fresh Flexible Silicone Neon-Like LED Strips! They look a lot like neon, but without the need for...

SKU: AF-4537 | Brand: Adafruit

Drive massive NeoPixel installations without blocking your code. The NeoPXL8 FeatherWing for Feather M4 enables 8 concurrent DMA NeoPixel strands from a single Feather M4, with up to 1,750 RGB pixels per strand (14,00...

SKU: SF-COM-16346 | Brand: SparkFun

The WS2812B (or "NeoPixel") may look like a common 5050-sized (5x5mm) SMD LED, but there’s actually an integrated control circuit embedded inside there too. Sometimes you don't need 10, maybe you need 50! If you are t...

SKU: AF-4492 | Brand: Adafruit

Make your own smart LED arrangement with the same integrated LED that is used in our NeoPixel strip and pixels. This tiny 1515 (1.5mm x 1.5mm) RGB LED is designed to be surface-mount soldered and is the most compact w...

SKU: SF-BOB-15932 | Brand: SparkFun

The SparkFun Qwiic Button simplifies adding a tactile button to your I2C project. It handles debouncing, pull-up resistors, and polling internally, so you can focus on your application. A built-in red LED provides vis...

SKU: EF-EF03425 | Brand: ElecFreaks

Ring:bit car V2 lights-bar module is the dedicated module which designed for Ring:Bit Car V2. It brings you beautiful mutiple color with simple assemble.Come with 8 Rainbow full color LEDs. You can update your ring:bi...

SKU: EF-EF04056 | Brand: ElecFreaks

The Octopus 0.36" Segment LED Brick is a compact 7-segment display module designed for simple numeric output. It features a 0.36-inch common anode LED display capable of showing digits 0–9 and decimal points. Operati...

SKU: EF-EF04057 | Brand: ElecFreaks

OCTOPUS 056C Segmentric is a type of common cathode digital tube display module based on HT16K33 drive, using a standard I2C communication interface. The  module using 0.56 inches common cathode digital tube w...