LEDs & NeoPixels

SKU: EF-EF05010 | Brand: ElecFreaks

A green LED module from the ELECFREAKS PlanetX sensor range, designed for use with micro:bit and the Nezha expansion board. The RJ11 connector makes it simple to plug in — no soldering or breadboard required. Control...

SKU: EF-EF05011 | Brand: ElecFreaks

Four colors of red, yellow, blue, and green are available, which are able to light up and emit beautiful light, adjust the brightness, or flash under your control. In addition, you can also create installations by cr...

SKU: AF-5943 | Brand: Adafruit

Pixelblaze is a Wi-Fi Addressable LED Controller and Custom Pattern Editor, powered by an ESP32 module with 240Mhz dual-core processor for 'blazingly fast' pixel rendering capabilities.This is the Pixelblaze V3 Pico w...

SKU: AF-5756 | Brand: Adafruit

The only thing better than a nice mechanical key, is one that also can glow any color of the rainbow - and that's what the Adafruit NeoKey Breakout will let you do! This little 0.75" x 0.95" PCB can fit one Kailh CHOC...

SKU: AF-5409 | Brand: Adafruit

PIXIE CHROMA is a dual-5x7 character display for Arduino that can be easily chained to create easy-to-use displays as long or tall as you'd like!Each PCB features 70 addressable WS2812-compatible RGB LEDs in two side...

SKU: AF-5021 | Brand: Adafruit

The Adafruit Slider Trinkey is a tiny USB A board built around the ATSAMD21 microcontroller with a pre-soldered 35 mm slide potentiometer and two NeoPixel LEDs. Plug it into any USB A port on your computer and program...

SKU: AF-4964 | Brand: Adafruit

The Adafruit Rotary Trinkey is a tiny USB A board built around the ATSAMD21 microcontroller with a footprint for a standard rotary encoder and a built-in NeoPixel LED. Plug it into any USB A port on your computer and ...

SKU: AF-5295 | Brand: Adafruit

Add a smooth slide control to any I2C project with the Adafruit NeoSlider — a 75 mm linear slide potentiometer with four RGB NeoPixel underlights, all communicating over I2C via the onboard seesaw microcontroller. No ...

SKU: M5-U070 | Brand: Little Bird

The M5StickC Yun HAT is a cloud-shaped multi-sensor environmental monitoring accessory designed to mount on the M5StickC via the top socket. It integrates a temperature and humidity sensor (SHT20), barometric pressure...

SKU: AF-1558 | Brand: Adafruit

So, you want lots and lots of NeoPixels? And you want them for less? Not a problem! Here's a sheet of Breadboard-Friendly NeoPixel breakouts fresh from the (reflow) oven. Snap them off as you need 'em and save a pr...

SKU: SF-BOB-11040 | Brand: SparkFun

The SparkFun LED RingCoder Breakout provides a visual position indicator for rotary encoders. Two 8-bit shift registers drive a circular LED bargraph that displays the virtual position of the encoder as it turns, givi...

SKU: DF-DFR0090 | Brand: DFRobot

An 8-digit serial LED display module that uses an SPI (3-wire) interface, requiring only three I/O pins from your Arduino or microcontroller. Multiple modules can be daisy-chained together for longer displays. The fli...

SKU: PL-1245 | Brand: Pololu

The Satellite Module 003 is an RGB LED round “pixel” with three bright surface-mount RGB LEDs. This LED module is designed to be used with the OctoBrite DEFILIPPI to easily integrate full-color LED lighting into your...

SKU: LB-PT-MAX7219 | Brand: Little Bird

Features :100% Brand new and high qualityMAX7219 digital display control moduleThis module is compatible with 5V and 3.3V micro controllers.You you can use it for ArduinoMAX7219 is an integrated serial input / outp...

SKU: AF-5880 | Brand: Adafruit

The Adafruit I2C STEMMA QT Rotary Encoder Breakout comes with a 24-detent rotary encoder with push-switch pre-soldered, so you can start twisting right away. An onboard microcontroller running Adafruit's seesaw firmwa...

SKU: TB-ZD0670 | Brand: Little Bird

One of the most common lights used in caravans up until quite recently, is the 16W 2D fluoro. The problem with these is not only do they draw a lot of power for the light they produce, but they also blow very ...

SKU: AF-6314 | Brand: Adafruit

The Adafruit Sparkle Motion Mini is part of our series of "Sparkle Motion" boards, which are our attempt to make the best small WLED-friendly smart LED driving board in the whole world. Our resident mermaid, firepixie...

SKU: AF-4980 | Brand: Adafruit

The only thing better than a nice mechanical key is, perhaps, FOUR mechanical keys that also can glow any color of the rainbow - and that's what the Adafruit NeoKey 1x4 QT I2C Breakout will let you do! ...

SKU: AF-3954 | Brand: Adafruit

Upgrade your button-pad projects with full-colour NeoPixel backlighting. The NeoTrellis RGB Driver PCB is a 4×4 keypad controller with 16 NeoPixels and an onboard seesaw I2C chip that handles both button scanning and ...

SKU: AF-5766 | Brand: Adafruit

The Adafruit NeoDriver converts I2C commands into NeoPixel (WS2812/SK6812) timing signals, letting you control addressable LED strips from any board with an I2C bus — even platforms that lack native NeoPixel support. ...