LED Drivers & Controllers

SKU: AF-2601 | Brand: Adafruit

The Adafruit RGB Matrix Shield simplifies connecting HUB75-type RGB LED matrices to Arduino-compatible boards. Instead of wiring up a bundle of individual connections, this shield handles all the routing for you — jus...

SKU: IT-IM140806001 | Brand: Little Bird

This RGB LED dot-matrix driver is Arduino-compatible and designed for driving colourful LED matrix displays with hardware PWM support.It pairs the M54564 with a DM163 constant current driver, giving three 8+6-bit chan...

SKU: AF-3975 | Brand: Adafruit

Drive up to 8 strands of NeoPixels simultaneously with DMA — no more blocking your code to push pixel data. The NeoPXL8 Friend is a standalone level-shifting breakout board that converts 3.3 V logic to 5 V for 8 indep...

SKU: AF-1429 | Brand: Adafruit

Control 24 channels of 12-bit PWM output with the Adafruit TLC5947 breakout board. Designed for LED control, this SPI-driven board delivers constant-current open-drain outputs that keep brightness consistent even if t...

SKU: AF-6066 | Brand: Adafruit

The Adafruit Pixel Shifter is a simple inline level-shifting board for addressable LEDs like NeoPixels (WS2812, SK6812) and similar one-wire-control pixels. It solves the common problem of 3.3V microcontrollers not be...

SKU: AF-2345 | Brand: Adafruit

The Adafruit RGB Matrix HAT + RTC makes it easy to drive HUB75-type RGB LED matrices from your Raspberry Pi. This HAT plugs onto any Pi with a 40-pin GPIO header and includes a DS1307 real-time clock, so your Pi can k...

SKU: AF-2946 | Brand: Adafruit

The Adafruit IS31FL3731 breakout is a charlieplexed PWM LED matrix driver that controls a 16×9 grid of individually dimmable LEDs over I2C. Each of the 144 LEDs can be set to any brightness level with 8-bit (256-level...

SKU: WS-28643 | Brand: Waveshare

Illuminate Your Smart Home with Precision: DALI2 Expansion Module for ESP32-Pico BoardsTake your lighting automation to the next level with the DALI2 Expansion Module, designed to integrate effortlessly with the ESP3...

SKU: AF-4886 | Brand: Adafruit

The Adafruit AW9523 GPIO Expander and LED Driver Breakout adds 16 I/O pins to any I2C-capable microcontroller or single-board computer. What sets this expander apart is its built-in 256-step linear constant-current LE...

SKU: SF-DEV-15110 | Brand: SparkFun

The SparkFun ESP32 Thing Plus DMX to LED Shield enables sending and receiving DMX data via an on-board XLR-3 jack or over ArtNet. Designed for developing custom DMX fixtures or adding ArtNet capabilities to existing s...

SKU: AF-1378 | Brand: Adafruit

The WS2811 is the driver IC used in NeoPixel LED strips and pixels. In this SOIC-8 package, it lets you build your own addressable RGB LEDs by driving a single common-anode RGB LED or three individual single-colour LE...

SKU: EL-2524206 | Brand: Jaycar

These GlowBugs enable you to add colours to your CodeBug. Each GlowBug can be programmed to flash or glow any colour that you choose. They can be used for a variety of applications, including sewing them onto fabrics ...

SKU: DF-DFR0944 | Brand: DFRobot

##Introduction The EDGE102-DMX512 controller is an advanced lighting control system designed to manage stage, theater, and venue lighting using the DMX512 protocol. With a variety of interfaces—including RS485, I2C, a...

SKU: EC-CDE20032P | Brand: Elecrow

An Arduino Uno shield that makes it easy to drive a 16×32 RGB LED matrix panel with a HUB75 connector. Instead of wiring up 12 individual jumper wires, this shield provides a matching 2×8 IDC connector for a clean, re...

SKU: AF-1427 | Brand: Adafruit

The Adafruit 16×8 LED Matrix Driver Backpack is a breadboard-friendly breakout for the HT16K33 multiplexed LED driver. Unlike the pre-configured LED backpacks, this version breaks out all 16 anode and 8 cathode pins, ...

SKU: AF-1455 | Brand: Adafruit

The Adafruit 12-Channel 16-bit PWM LED Driver uses the TLC59711 chip to provide 12 channels of constant-current, 16-bit PWM output — the highest resolution PWM driver available. Designed specifically for precision LED...

SKU: AF-2038 | Brand: Adafruit

A 16×8 LED matrix backpack kit featuring two ultra-bright 1.2" white 8×8 round LED matrices on a single I2C-controlled driver board. The HT16K33 chip handles all the multiplexing, so you only need two I2C pins (SDA an...

SKU: DF-KIT0069 | Brand: DFRobot

The DFRobot Bluetooth 4.0 RGB LED Strip Kit combines a 3-metre WS2812 addressable LED strip with a Bluno (Arduino-compatible Bluetooth 4.0 board), sound sensor, and audio analyser. Control every individual LED from yo...

SKU: SF-COM-13716 | Brand: SparkFun

The FemtoBuck is a compact, single-channel constant-current LED driver capable of driving high-power LEDs at up to 350 mA with input voltages up to 36 V. Dimming is controlled via PWM or an analog signal (0–2.5 V), an...

SKU: SF-COM-13705 | Brand: SparkFun

The PicoBuck is a three-channel constant-current LED driver based on the AL8805. Each channel drives LEDs at 330 mA by default, with a solderable jumper to increase the maximum to 660 mA per channel. Dimming is contro...