LED Drivers & Controllers

SKU: AF-1429 | Brand: Adafruit

Control 24 channels of 12-bit PWM output with the Adafruit TLC5947 breakout board. Designed for LED control, this SPI-driven board delivers constant-current open-drain outputs that keep brightness consistent even if t...

SKU: AF-6066 | Brand: Adafruit

The Adafruit Pixel Shifter is a simple inline level-shifting board for addressable LEDs like NeoPixels (WS2812, SK6812) and similar one-wire-control pixels. It solves the common problem of 3.3V microcontrollers not be...

SKU: AF-2946 | Brand: Adafruit

The Adafruit IS31FL3731 breakout is a charlieplexed PWM LED matrix driver that controls a 16×9 grid of individually dimmable LEDs over I2C. Each of the 144 LEDs can be set to any brightness level with 8-bit (256-level...

SKU: AF-4886 | Brand: Adafruit

The Adafruit AW9523 GPIO Expander and LED Driver Breakout adds 16 I/O pins to any I2C-capable microcontroller or single-board computer. What sets this expander apart is its built-in 256-step linear constant-current LE...

SKU: EL-2524206 | Brand: Jaycar

These GlowBugs enable you to add colours to your CodeBug. Each GlowBug can be programmed to flash or glow any colour that you choose. They can be used for a variety of applications, including sewing them onto fabrics ...

SKU: AF-1427 | Brand: Adafruit

The Adafruit 16×8 LED Matrix Driver Backpack is a breadboard-friendly breakout for the HT16K33 multiplexed LED driver. Unlike the pre-configured LED backpacks, this version breaks out all 16 anode and 8 cathode pins, ...

SKU: AF-1455 | Brand: Adafruit

The Adafruit 12-Channel 16-bit PWM LED Driver uses the TLC59711 chip to provide 12 channels of constant-current, 16-bit PWM output — the highest resolution PWM driver available. Designed specifically for precision LED...

SKU: SF-COM-13716 | Brand: SparkFun

The FemtoBuck is a compact, single-channel constant-current LED driver capable of driving high-power LEDs at up to 350 mA with input voltages up to 36 V. Dimming is controlled via PWM or an analog signal (0–2.5 V), an...

SKU: SF-COM-13705 | Brand: SparkFun

The PicoBuck is a three-channel constant-current LED driver based on the AL8805. Each channel drives LEDs at 330 mA by default, with a solderable jumper to increase the maximum to 660 mA per channel. Dimming is contro...

SKU: AF-453 | Brand: Adafruit

When you need some help driving a lot of LEDs, the MAX7219 is the best friend you could hope for. Many of us know that if you want to control a lot of LEDs, you'll want to use multiplexing, a technique that lets you c...

SKU: PI-PIM728 | Brand: Pimoroni

Add smart light and sound effects to models and dioramas with this small-but-mighty RP2040-powered programmable controller board - now with wireless connectivity!Tiny FX W is an effects controller for the LED dots and...

SKU: AF-5296 | Brand: Adafruit

The Adafruit LED Arcade Button 1×4 QT I2C Breakout lets you connect up to four illuminated arcade buttons to any microcontroller over I2C. A built-in seesaw microcontroller handles button press detection and LED PWM c...

SKU: AF-3088 | Brand: Adafruit

The Adafruit 4-Digit 7-Segment LED Matrix Display FeatherWing makes it easy to add a numeric display to any Feather project. The HT16K33 driver handles all LED multiplexing over I2C, so your Feather only needs two sha...

SKU: AF-3090 | Brand: Adafruit

Create a compact 8×16 LED matrix display for any Feather board with this FeatherWing driver. The HT16K33 I2C driver handles all multiplexing for two 0.8" mini 8×8 LED matrices (128 LEDs total), controlled over just tw...

SKU: SF-BOB-10616 | Brand: SparkFun

The TLC5940 is a 16 channel PWM unit with 12 bit duty cycle control (0-4095), 6 bit current limit control (0-63), and a daisy chainable serial interface. This breakout board is a good way to take full advantage of thi...

SKU: SF-PRT-28372 | Brand: SparkFun

Build large LED displays with a Teensy using this OctoWS2811 adapter board. It connects Teensy 3.2 through 4.1 boards to thousands of WS2811, WS2812 or NeoPixel-compatible LEDs, with support for driving up to eight st...

SKU: SF-SPX-21226 | Brand: SparkFun

This handy kit gives you a simple way to compare and tune the brightness of your own LEDs, helping you avoid a project full of mismatched indicator lights. It was originally designed for side-by-side LED testing and i...

SKU: AF-1616 | Brand: Adafruit

The Adafruit Trellis is an open-source backlight keypad driver system designed to work with the Adafruit 4×4 elastomer keypad and 3mm LEDs. Each tile handles keypress detection and LED control for a 4×4 grid over I2C,...