LCD & OLED Displays

SKU: LB-LR0085 | Brand: Little Bird

The 0.96″ 128×64 OLED Display Module delivers crisp, high-contrast visuals in a compact 27 × 27 mm package. Driven by the SSD1306 controller over I2C, it requires only two I/O pins and operates across a wide 3.3–5V ra...

SKU: LB-24-OLED | Brand: Little Bird

This 0.96″ OLED Screen Module is a compact I2C display with a simple 4-pin interface, making it easy to add visual output to your micro:bit, Arduino, or other microcontroller projects. The high-contrast OLED panel pro...

SKU: WS-25512 | Brand: Waveshare

A 1.54-inch OLED display module with 128×64 resolution and white pixels on a black background. Built around the SSD1309 driver chip, it supports both 4-wire SPI and I2C interfaces and includes an onboard voltage trans...

SKU: WS-25742 | Brand: Waveshare

A 2.42″ monochrome OLED display module from Waveshare with 128 × 64 resolution, driven by the SSD1309 controller. It supports both 4-wire SPI and I2C interfaces with an onboard voltage translator, and Waveshare provid...

SKU: WS-25587 | Brand: Waveshare

The Waveshare OLED/LCD HAT (A) combines a 2-inch IPS LCD main screen with dual 0.96-inch blue OLED secondary screens on a single Raspberry Pi HAT. It's ideal for displaying system stats, status indicators, and small g...

SKU: KI-56115 | Brand: Kitronik

The Kitronik :VIEW Graphics128 OLED display gives the user the ability to add a monochrome 128x64 display to the BBC micro: bit. The onboard edge connector allows the micro:bit to slot into the board without any addit...

SKU: WS-30953 | Brand: Waveshare

A 0.96″ white OLED display module designed to snap into the Argon ONE V5 case for Raspberry Pi. Once installed and configured, it displays real-time system information including CPU temperature, uptime, and IP address...

SKU: DF-DFR0934 | Brand: DFRobot

This is a 1.51” SSD1309 transparent monochrome OLED display (light blue) with a converter. It offers a resolution of 128×64 (The completely transparent area is 128×56.  There is a small section near the pins t...

SKU: DF-DFR0650 | Brand: DFRobot

This 0.96” OLED display module uses the SSD1306 drive chip, has 128x64 self-illuminating white pixels, and adopts two communication methods: SPI/ I2C, I2C in default. With its high contrast, simple wiring and low powe...

SKU: AF-3045 | Brand: Adafruit

A Feather board without ambition is a Feather board without FeatherWings! This is the Assembled FeatherWing OLED: it adds a 128x32 monochrome OLED plus 3 user buttons to any Feather main board. Comes fully assemble...

SKU: DF-DFR0486 | Brand: DFRobot

The Gravity I²C OLED-2864 is a 0.96″ blue OLED display module driven by the SSD1306 controller. It communicates via I²C and refreshes at up to 60 Hz, making it ideal for real-time data readouts on Arduino and other mi...

SKU: AF-3531 | Brand: Adafruit

The Adafruit 128×64 OLED Bonnet is a compact display add-on for Raspberry Pi, featuring a 1.3" diagonal monochrome OLED screen with a 5-way joystick and two pushbuttons. The high-contrast white OLED pixels are individ...

SKU: AF-326 | Brand: Adafruit

This 0.96" monochrome OLED display packs 128×64 individually controllable white pixels into a compact, highly readable screen. Because OLED pixels produce their own light, no backlight is needed — resulting in excelle...

SKU: AF-2900 | Brand: Adafruit

A Feather board without ambition is a Feather board without FeatherWings! This is the FeatherWing OLED: it adds a 128x32 monochrome OLED plus 3 user buttons to any Feather main board. Using our Feather Stacking Hea...

SKU: EF-EF05016 | Brand: ElecFreaks

This is an OLED display in 128×64. It has a slim profile, high brightness, high contrast, and a large screen. We can use it to display the recorded temperature, humidity, date, and other information, giving it practic...

SKU: AF-2719 | Brand: Adafruit

If you've been diggin' our monochrome OLEDs but need something bigger, this display will delight you! These displays are 2.42" diagonal, and very readable due to the high contrast of an OLED display. This display i...

SKU: DF-FIT0021 | Brand: DFRobot

A 128×64 pixel graphic LCD module driven by the ST7920 controller. This display supports English characters, Chinese characters, and custom graphics over both serial (SPI) and parallel interfaces, making it a versatil...

SKU: SF-LCD-23453 | Brand: SparkFun

The SparkFun Qwiic 1.3in OLED is a compact, easy-to-use display perfect for adding a visual element to your Arduino, Raspberry Pi, or other microcontroller projects. With a vibrant 1.3-inch OLED screen and a resolutio...

SKU: AF-5228 | Brand: Adafruit

A raw 1.3" monochrome OLED display module with 128 × 64 pixel resolution, driven by the SH1106G controller over SPI. This is the same display used in the Adafruit MACROPAD RP2040. Key Features 1.3" Monochrome OLED ...

SKU: EF-EF04076 | Brand: ElecFreaks

OCTOPUS OLED Display is an OCTOPUS series electric brick with 128X64 OLED display.OLED display has characters of thin thickness, high brightness, self-emission, wide resolution and visual angle, wide temperature ra...