Jumpers & Wires

SKU: SF-CAB-22726 | Brand: SparkFun

This is a jumper adapter cable that comes pre-terminated with a female Qwiic JST connector on one end and female connectors on the other. This cable makes it easy to connect components with a Qwiic connector to the ma...

SKU: AF-5773 | Brand: Adafruit

Ostensibly this extension cord was originally designed to allow PlayStation game players to be able to sit across the room from their game system, but what we are using it for is to connect to PS controllers and acces...

SKU: AF-5618 | Brand: Adafruit

Snap action blocks are perfect when you have to quickly wire up a bunch of free-hanging components, and you don't want to solder. They're much easier to use than wire nuts, and of course, they are reuseable and do not...

SKU: DF-FIT0916-FF | Brand: DFRobot

Wires play an essential role in project building. Normally, users tell lines apart by colors or onboard pin silkscreen, but mistakes sometimes happen because they may get the wire color wrong due to complex wiring, an...

SKU: AF-5515 | Brand: Adafruit

Stretch out your servo connections with this flexible servo to premium male header jumper cable. It has a 3-pin shrouded "male" connector to plug the servo into and then, 17cm later, three separated jumper wire e...

SKU: SF-ROB-19224 | Brand: SparkFun

A servo adapter cable with a shrouded male servo connector on one end and three individual breadboard-compatible pigtail wires on the other. Makes it easy to connect a servo to a breadboard, development board, or any ...

SKU: LB-LS3426-1254 | Brand: Little Bird

These insulated ring terminal connectors (RV1.25-4) provide a reliable crimp connection for securing wires to screw terminals, bolts, and studs. The ring shape fits over standard screws, making them ideal for electric...

SKU: SF-CAB-18984 | Brand: SparkFun

This is the 100mm 16-way 0.5mm-pitch Flexible Printed Circuit used to interconnect smôl boards end to end. smôl is an ecosystem of miniature processor boards, peripheral boards, power boards and accessories. Designed ...

SKU: SF-CAB-18985 | Brand: SparkFun

This is the 36mm 16-way 0.5mm-pitch Flexible Printed Circuit used to interconnect smôl boards side by side. This FPC has an offset (step) of 18mm. smôl is an ecosystem of miniature processor boards, peripheral boards,...

SKU: AF-5386 | Brand: Adafruit

A 26-pin flexible flat cable (FPC) with 1mm pitch, 20cm in length. FPC cables are ultra-thin and flexible, making them ideal for tight spaces where round cables would be too bulky. This cable is commonly used for conn...

SKU: AF-5365 | Brand: Adafruit

A 30 cm cable with a standard 4-pin Molex connector, designed to tap into the 5V or 12V DC power rails of an AT or ATX power supply. Perfect for powering electronics projects directly from a desktop PSU. The connecto...

SKU: DF-FIT0833 | Brand: DFRobot

This gold-plated IPEX to SMA female connector has passed 48 hours salt spray test, which is durable and not easy to rust.It adopts RG1.13 wire material and high-density shielding layer, soft and firm, fold-resistant a...

SKU: DF-FIT0769 | Brand: DFRobot

This high-quality 50cm analog sensor cable is equipped with a 3-pin PH2.0 plug connector on one side and a 3-pin DuPont connector on the other side. They are specially designed for our popular IO Expansion shield and ...

SKU: DF-FIT0690 | Brand: DFRobot

This is a 15cm 18Pin FPC flat flex Ribbon cable specially designed for working with GDI.  The cable is well durable and hard to be damaged even when bent sharply. There are insulted pads on the back that can c...

SKU: DF-FIT0751 | Brand: DFRobot

This 0.4 mm heat-resistant welding wire is built from seven 0.08 mm silver-plated copper conductors with a PFA insulation jacket. It handles temperatures from −60 °C to +250 °C, making it suitable for fine soldering w...

SKU: AF-4391 | Brand: Adafruit

Designing boards with plug-n-play connectivity is a snap, with STEMMA connectors. Here's a pack of 10 of our favorite 2mm pitch connector - the JST PH 3 pin. These are the horizontal style.You can use these with any o...

SKU: AF-5204 | Brand: Adafruit

A simple pass-through adapter that connects two 30-pin, 0.5mm pitch FFC (Flexible Flat Cable) or FPC (Flexible Printed Circuit) cables end-to-end, extending the total cable length. Useful when the included cable on a ...

SKU: AF-4946 | Brand: Adafruit

A 20-pin ribbon-style jumper cable with 2.54mm (0.1") pitch connectors on both ends. A neat, reliable way to connect standard 0.1" header devices — perfboard, breadboards, breakout boards, and more — without taping in...

SKU: AF-4944 | Brand: Adafruit

A 16-pin ribbon-style jumper cable with 2.54mm (0.1") pitch connectors on both ends. A neat, reliable way to connect standard 0.1" header devices — perfboard, breadboards, breakout boards, and more — without taping in...

SKU: AF-4939 | Brand: Adafruit

An 8-pin ribbon-style jumper cable with 2.54mm (0.1") pitch connectors on both ends. A neat, reliable way to connect standard 0.1" header devices — perfboard, breadboards, breakout boards, and more — without taping in...