Jumpers & Wires

SKU: SF-PRT-26026 | Brand: SparkFun

This is a 500mm camera cable for use with MIPI displays and the Raspberry Pi 5. The Raspberry Pi 5 provides two four-lane MIPI connectors, each of which can support either a camera or a display. These connectors use t...

SKU: LB-LS7522 | Brand: Little Bird

A 30cm breakout cable with a Micro-USB plug on one end and clearly labelled screw terminals on the other. Provides easy access to power and data lines for prototyping, enclosures, and custom installations without sold...

SKU: SF-CAB-22036 | Brand: SparkFun

An RP-SMA (Reverse Polarity Sub-Miniature A) extension cable with male-to-female connectors and RG174 coaxial housing. Ideal for mounting an antenna to the outside of an enclosure while keeping the electronics inside....

SKU: SF-CAB-22037 | Brand: SparkFun

A 25cm RP-SMA male-to-female extension cable with RG174 coaxial housing. Ideal for repositioning an antenna to the outside of an enclosure while keeping your electronics neatly inside, this cable provides a reliable R...

SKU: AF-5497 | Brand: Adafruit

We now have a handy extension cord for JST-XH projects! One end has a JST-XH socket, and the other has a matching plug. Between the two, 500mm of color-coded wire. This solid 2.5mm pitch connector exten...

SKU: DF-FIT0957 | Brand: DFRobot

The IPEX4 to SMA Female Connector Cable is a 200 mm adapter designed for single-board computers equipped with an IPEX4 (MHF4) wireless interface, including the LattePanda 3 Delta, LattePanda 2 Alpha, and LattePanda 2 ...

SKU: DF-FIT0975 | Brand: DFRobot

##Introduction This power cord is specially designed for LattePanda Sigma users and can provide stable power supply to Sigma. One end of the cable adopts an ATX-24Pin chassis power connector for connecting to the chas...

SKU: SF-CAB-25070 | Brand: SparkFun

This custom-designed OBD-II cable from Macchina functions as both a splitter and at about one meter (~39 inches) in length, as an OBD-II extension cable. Unlike other cables out there, all 16 pins connected between ea...

SKU: AF-5917 | Brand: Adafruit

A 5.5×2.1mm DC barrel polarity reversing cable that swaps centre-negative to centre-positive (or vice versa). Simply plug it inline between your DC power supply and device to reverse the polarity — no rewiring require...

SKU: SF-CAB-22038 | Brand: SparkFun

This is a basic RP-SMA (Reverse Polarity Sub-Miniature A) male to female connector cable. Each cable is 10M (393.7in.) long with RG58 housing. The RP-SMA connectors at each end are small enough for most consumer GPS, ...

SKU: SF-CAB-22034 | Brand: SparkFun

A 25 cm (9.8″) SMA male-to-female extension cable with RG174 coaxial housing. Ideal for mounting an antenna on the outside of an enclosure while keeping the RF module or GPS receiver safely inside. The threaded SMA co...

SKU: DF-FIT0914 | Brand: DFRobot

A 10-pack of PH2.0-4P male-to-male cables for connecting Boson modules, UNIHIKER boards, and other modular electronics. The polarised 4-pin connectors ensure correct orientation and prevent reverse insertion. Key Fea...

SKU: DF-FIT0913 | Brand: DFRobot

A 10-pack of PH2.0-3P male-to-male cables for connecting Boson modules, UNIHIKER boards, and other modular electronics. The polarised 3-pin connectors ensure correct orientation and prevent reverse insertion. The 20cm...

SKU: AF-6405 | Brand: Adafruit

This JST SH compatible cable features 1 mm pitch 3-pin connectors on both ends, making it ideal for chaining boards together or connecting to debug ports. It's perfect for use with NeoPixel JST breakout boards, UPDI p...

SKU: AF-6404 | Brand: Adafruit

If you fancy connecting to anything else with a JST SH compatible 3-pin connector, this cable will do the trick. For example, our NeoPixel JST Breakout boards, or UPDI Friend, or Sparkle Motion, or other boards we hav...

SKU: AF-6406 | Brand: Adafruit

If you fancy connecting to anything else with a JST SH compatible 3-pin connector, this cable will do the trick. For example, our NeoPixel JST Breakout boards, or UPDI Friend, or Sparkle Motion, or other boards we hav...

SKU: EF-EF05049 | Brand: ElecFreaks

A pack of five RJ11 modular cables with 4P4C (4-position, 4-contact) connectors on each end. Each cable is 200 mm long and provides a four-wire straight-through connection, suitable for connecting sensors and modules ...

SKU: DF-FIT0993 | Brand: DFRobot

This 30cm cable converts a USB Type-C connection into a 5-pin solderless screw terminal block, making it easy to wire power and data to Type-C devices without soldering or custom connectors. All five Type-C pins are b...

SKU: SF-CAB-22035 | Brand: SparkFun

This is a basic SMA (Sub-Miniature A) male to female connector cable. Each cable is 1M (39.3in.) long with RG174 housing. The SMA connectors at each end are small enough for most consumer GPS, cellular, and other RF a...

SKU: SF-CAB-17983 | Brand: SparkFun

This cable provides a simple way to connect a 2.5mm mono audio plug to two alligator clips. It is made from 22 AWG wire and is 8in. long, making it handy for quick bench connections, testing and temporary hook-ups.One...