Jumpers & Wires

SKU: SF-CAB-22034 | Brand: SparkFun

A 25 cm (9.8″) SMA male-to-female extension cable with RG174 coaxial housing. Ideal for mounting an antenna on the outside of an enclosure while keeping the RF module or GPS receiver safely inside. The threaded SMA co...

SKU: AF-5391 | Brand: Adafruit

If you're messing around with floppy drives, or disk drives, or other devices that are usually powered with a PC motherboard you'll often see these big 'Molex' connectors used to provide power. They are used to give 5...

SKU: SF-CAB-18983 | Brand: SparkFun

A 1-metre TRS (Tip, Ring, Sleeve) audio cable with standard 3.5mm plugs on both ends. Suitable for connecting audio devices, development boards with 3.5mm jacks, and other three-conductor applications. Specifications...

SKU: SF-CAB-18079 | Brand: SparkFun

This is a handy cable for connecting a six pin GHR-06V type locking connector to breadboard friendly male pins. The six male pins that terminate one side of the cable feature a 1.25mm pitch while the GHR-06V JST is ty...

SKU: SF-CAB-18080 | Brand: SparkFun

This is a 4-pin JST-ZHR cable that's terminated on the end with breadboard compatible Dupont connectors. The four male pins that terminate one side of the cable feature a 1.5mm pitch while the JST-ZHR JST provides a s...

SKU: DF-FIT0140 | Brand: DFRobot

These are two pin jumpers (also called shunts) that will create an electrical connection for the 2.54mm(0.1") male pin headers. Commonly used to modify settings on a board or device. APPLICATIONS Jumpering pi...

SKU: DF-FIT0148 | Brand: DFRobot

This product includes 2-pin 2.0mm mating connector housing(10 units) and crimp pins (20 units). They work with wires ranging from 28 to 26 AWG. SPECIFICATIONS 2-pin 2.0mm mating connector housing 28-26 AWG crim...

SKU: SF-PRT-09194 | Brand: SparkFun

A mixed pack of 100 premium jumper wires in assorted colours, ideal for breadboard prototyping and connecting to 0.1″ headers. The pack includes 50 male-to-male and 50 female-to-female wires, each 155 mm (6″) long. T...

SKU: SF-COM-14196 | Brand: SparkFun

The Clincher connector from Amphenol FCI provides a quick, tool-free way to terminate Flat Flexible Cables (FFCs) to standard 0.1" pin headers. Simply insert the end of the cable into the connector and press it closed...

SKU: SF-COM-14195 | Brand: SparkFun

The Clincher connector from Amphenol FCI provides a quick, tool-free way to terminate Flat Flexible Cables (FFCs) to standard 0.1" pin headers. Simply insert the end of the cable into the connector and press it closed...

SKU: SF-PRT-08535 | Brand: SparkFun

This 2×5 (10-pin) IDC ribbon cable with 2.54 mm pitch connectors is commonly used for AVR ISP programming and general-purpose communication between boards. The cable is 6 inches (approximately 15 cm) in length. Key F...

SKU: SF-CAB-00507 | Brand: SparkFun

These are various leaded cables for attaching to multimeters, power supplies, oscilloscopes, function generators, etc. Cables come in red/black pairs. Dimensions: 36" Long

SKU: SF-PRT-00111 | Brand: SparkFun

A standard alligator clip — an essential tool for any electronics workbench. Use it for making quick temporary connections when prototyping circuits, testing components, or extending test leads. Ideal For Prototypin...

SKU: AF-3310 | Brand: Adafruit

A 5.5×2.1mm DC barrel connector plug for adding a standard power connector to the end of your own wires. The outer shell unscrews to reveal solder terminals and a crimp strain relief, making it easy to wire up custom ...

SKU: DF-FIT0452 | Brand: DFRobot

A 2-way lever-action wire connector made from flame-retardant material. These connectors provide a quick, solderless way to join wires — simply lift the lever, insert the stripped wire, and push the lever down to lock...

SKU: SF-PRT-09915 | Brand: SparkFun

This is a simple three wire cable. Great for jumping from board to board or just about anything else. There is a 3-pin JST connector on one end, bare cable on the opposite end. It also comes with the mating connector ...

SKU: DF-FIT0031 | Brand: DFRobot

A pack of 10 analog sensor cables designed for use with DFRobot IO Expansion Shields and compatible analog sensors. Each cable connects a sensor to the expansion shield's analog ports, making wiring quick and tidy. E...

SKU: EF-EF05049 | Brand: ElecFreaks

A pack of five RJ11 modular cables with 4P4C (4-position, 4-contact) connectors on each end. Each cable is 200 mm long and provides a four-wire straight-through connection, suitable for connecting sensors and modules ...

SKU: SF-PRT-14321 | Brand: SparkFun

A standard 1×12 female header designed for the Particle Photon and Photon ProtoShield boards. Add reliable, stackable connectivity to your next Photon project with this 0.1" (2.54mm) pitch header. While designed for ...

SKU: DF-FIT0251 | Brand: DFRobot

This is a white spiral cable guide. This spiral makes it very easy to control your cables after they've already been plugged in, or when you have many cables going to differnet places. NOTE: Longer sleeving is av...