IoT Devices & Platforms

SKU: EC-ILM13205D2-915 | Brand: Elecrow

The Elecrow ThinkNode M5 is a high-performance LoRa communication device powered by the ESP32-S3 processor. Pre-installed with Meshtastic firmware and featuring the SX1262 wireless chip, it efficiently sends and recei...

SKU: EF-EF03426 | Brand: ElecFreaks

IOT:bit is an expansion board based on IoT for micro:bit. It uses ESP8266 as WIFI expansion board and serial port to communicate with micro:bit. It also has extended all available IO port of the micro:bit which is lea...

SKU: EC-CIL13002M2 | Brand: Elecrow

Elecrow ThinkNode-M2 is a high-performance LoRa signal transceiver. It uses the ESP32-S3 module as the main processor and supports Bluetooth. Users can easily configure and monitor the device through their mobile pho...

SKU: AF-5778 | Brand: Adafruit

The Adafruit Matrix Portal S3 is the next-generation plug-and-play controller for HUB-75 RGB LED matrix panels. Powered by the ESP32-S3 with built-in WiFi and Bluetooth LE, it plugs directly into the back of any compa...

SKU: EC-CIL12901M-1 | Brand: Elecrow

ThinkNode M1 — Off-Grid Meshtastic Communication Device The Elecrow ThinkNode M1 is a compact, fully integrated LoRa transceiver designed for off-grid mesh networking. Pre-loaded with Meshtastic firmware, it enab...

SKU: DF-DFR1096 | Brand: DFRobot

The Arduino Nano ESP32 brings the ESP32-S3 (u-blox NORA-W106 module) into the familiar Nano form factor with a USB-C connector. It supports both Arduino and MicroPython programming, making it an accessible entry point...

SKU: EC-PMMA19005G | Brand: Elecrow

A DC 12 V four-way solenoid valve with one inlet and four independently controlled outlets. Each outlet has its own control wire, so you can open any combination of the four channels — use one at a time or all four si...

SKU: EF-EF08203 | Brand: ElecFreaks

The Smart Science IoT Kit from ElecFreaks is a comprehensive sensor and IoT learning kit built around the IoT:bit breakout board for micro:bit. It combines environmental sensors with WiFi connectivity, allowing studen...

SKU: AF-5427 | Brand: Adafruit

Bangle.js 2 is an open, hackable smartwatch. With a sunlight-readable always-on screen, 4-week battery life, complete flexibility, and complete control of your data, Bangle.js 2 is a refreshing break from expensiv...

SKU: DF-DFR0706-EN | Brand: DFRobot

UNIHIKER is a compact single-board computer with a built-in 2.8-inch touchscreen, Wi-Fi, and Bluetooth. It features an array of on-board sensors — light sensor, accelerometer, gyroscope, and microphone — along with a ...

SKU: AF-4745 | Brand: Adafruit

The Adafruit Matrix Portal is a plug-and-play controller for HUB-75 RGB LED matrix panels. Powered by an ATSAMD51 (Cortex M4) with an ESP32 WiFi coprocessor, it plugs directly into the back of any compatible matrix — ...

SKU: EC-DPO02102N | Brand: Elecrow

The NodeMCU R2 is a Wi-Fi development board based on the ESP8266 (ESP-12E module), featuring a CP2102 USB-to-UART bridge for reliable programming and debugging. It integrates GPIO, PWM, I2C, 1-Wire, and ADC on a singl...

SKU: DF-TEL0163 | Brand: DFRobot

The A7670G is a global 4G CAT1 communication module that brings cellular connectivity to your IoT projects. With support for LTE-FDD, LTE-TDD, and GSM bands worldwide, it provides reliable data transmission at up to 1...

SKU: WS-17391 | Brand: Waveshare

The Waveshare 13.3″ Magic Mirror is a smart mirror display powered by a built-in Raspberry Pi 3A+. Behind a one-way mirror panel, a 13.3″ IPS touchscreen (1920×1080) displays customisable information — news, weather, ...

SKU: DF-TEL0146 | Brand: DFRobot

In life, remote controllers can be seen everywhere, and most of them are inseparable from the battery. However, we often encounter problems when using the battery, for instance, it is troublesome to replace the batter...

SKU: DF-TEL0124 | Brand: DFRobot

The SIM7600CE-T 4G(LTE) Shield is a compact 4G/3G/2G communication and GNSS positioning module in an Arduino-compatible shield form factor. About the size of a credit card, it plugs directly into Arduino UNO, Leonardo...

SKU: EC-CRT13450K | Brand: Elecrow

When we want to get up early every morning to understand the weather conditions outside, or we want to DIY a weather station. What is more we want to be able to build a smart home product of the initial model, this ES...

SKU: DF-DFR0342 | Brand: DFRobot

W5500 Ethernet with POE Mainboard is a new member in our Ethernet family. It is based on the ATmega32u4 and W5500 Ethernet chip, which is quite useful to most IOT projects. W5500 chip is a Hardwired TCP/IP embedded E...

SKU: AF-4800 | Brand: Adafruit

The Adafruit MagTag is a WiFi-connected E-Ink display board powered by the ESP32-S2. Its 2.9" grayscale display retains its image even when power is removed, making it perfect for low-power IoT dashboards, status boar...

SKU: DF-DFR0767 | Brand: DFRobot

INTRODUCTIONCompute Module 4 IoT Router Carrier Board Mini is an internet expansion board based on the Raspberry Pi Compute Module 4. When connecting with a gigabit network card via PCle, it brings Raspberry Pi CM4 tw...