Individual LEDs

SKU: LB-WHITE-100 | Brand: Little Bird

A bulk pack of 100 white 5mm through-hole LEDs. These standard LEDs are ideal for power indicators, status lights, and general-purpose projects. Key Features 5mm Diameter – Standard size for breadboards and PCBs W...

SKU: DF-DFR0785-B | Brand: DFRobot

This is a simple LED-illuminated switch button with a transparent cap. It’s just like a basic switch button, but it lights up color(red/ yellow/ green/ blue/ white) when pressed down, which gives you visual feedback. ...

SKU: AF-4893 | Brand: Adafruit

These incredibly small surface-mount NeoPixel LEDs measure just 3.2 × 1.0 × 1.48mm, making them perfect for projects where space is at a premium. Each LED contains red, green, and blue elements with a built-in driver ...

SKU: AF-4203 | Brand: Adafruit

A pack of 25 diffused 5mm LEDs in five colours — white, blue, green, yellow, and red (5 of each). These classic through-hole LEDs are bright enough for daytime visibility and diffused for a wide viewing angle, making ...

SKU: AF-4204 | Brand: Adafruit

A mixed pack of 25 diffused 10 mm LEDs in five colours — white, blue, green, yellow, and red (5 of each). The large diffused lens provides wide-angle visibility and even light output, making these LEDs easy to see in ...

SKU: SF-COM-14563 | Brand: SparkFun

A pack of 25 green 5mm LEDs with built-in resistors, eliminating the need for external current-limiting resistors. Operating from 3.0V to 5V, these LEDs are ready to connect directly to your power source — no calculat...

SKU: AF-1451 | Brand: Adafruit

Diffused 5mm tri-colour LEDs with separate red, green, and blue chips inside a square "Piranha" (super-flux) package. With a 90° viewing angle and up to 3000mcd combined brightness, these LEDs are great for colour mix...

SKU: AF-1612 | Brand: Adafruit

The NeoPixel Mini PCBs are among the smallest addressable RGB LED breakouts available. Each tiny board measures just 8 × 10 mm and features two sets of three solder pads on the back for easy wiring. The pixels are cha...

SKU: AF-1655 | Brand: Adafruit

Individual WS2812B-compatible 5050 RGB LEDs with an integrated driver chip — the same LED used in NeoPixel strips and pixels. Each 5 × 5 mm package contains an RGB LED and controller with ~18 mA constant-current drive...

SKU: AF-1793 | Brand: Adafruit

Need some really bright LEDs? We are big fans of these 5mm clear UV / Purple LEDs. These emit UV 'blacklight' in the UVA spectrum so they are great for projects with fluorescent materials referred to as UV/blacklight-...

SKU: DF-DFR0021-G | Brand: DFRobot

This green LED light module has a shiny white color. It is ideal for Arduino starter. This module can be easy to be plugged on IO/Sensor expansion shield. NOTE: This LED is wired to light up when the Signal pin i...

SKU: DF-DFR0021-B | Brand: DFRobot

This Blue LED light module has a shiny white color. It is ideal for Arduino starters. This module can be easy to be plugged on IO/Sensor expansion shield. NOTE: This LED is wired to light up when the Signal p...

SKU: DF-DFR0031-G | Brand: DFRobot

This is a Piranha LED light module. A digital pin (LOW on, HIGH off) is used to control it. The brightness of LED can be controller via PWM output. APPLICATIONS DIY Projects Toys Games Audio indicator SPECIFICATIONS...

SKU: SF-COM-09264 | Brand: SparkFun

Ever hear of a thing called RGB? Red, Green, Blue? How about an RGB LED? These 5mm units have four pins - Cathode is the longest pin. One for each color and a common cathode. Use this one LED for three status indicato...

SKU: DF-DFR0238 | Brand: DFRobot

This small size breakout is programmable full-color RGB LED for hobbyists, industrial designers, prototypers, and experimenters. It is designed to allow the easy addition of dynamic indicators, displays, and lig...

SKU: SF-DEV-13902 | Brand: SparkFun

This is a simple pack of five White LilyPad LEDs that are still attached to one another, letting you snap the LEDs apart at your leisure to sew into clothing or whatever else you can dream up.LilyPad is a wearable e-t...

SKU: SF-COM-00532 | Brand: SparkFun

LEDs - those blinky things. A must have for power indication, pin status, opto-electronic sensors, and fun blinky displays. This is a very standard, yellow LED. The lens is 3mm in diameter and it is diffused.

SKU: SF-COM-00530 | Brand: SparkFun

A super bright yellow 5 mm LED with a clear lens, delivering high-intensity output that's ideal for indicator lights, visual alerts, and hobby electronics projects. The clear lens provides a focused beam with excellen...

SKU: SF-COM-00105 | Brand: SparkFun

Ever hear of a thing called RGB? Red, Green, Blue? How about an RGB LED? These 5mm units have four pins - Cathode is the longest pin. One for each color and a common cathode. Use this one LED for three status indic...

SKU: DF-FIT0372 | Brand: DFRobot

Have you ever played with LEDs and got hurt in your eyes? This pack of diffused LEDs won't. !Diffused LEDs are really useful in indications, they look softer and more uniformed so that you can see them well from any ...