Individual LEDs

SKU: SF-DEV-14010 | Brand: SparkFun

A pack of five pink LilyPad LEDs designed for wearable electronics and e-textile projects. The LEDs come attached to one another on a snap-apart strip, ready to be sewn into clothing, accessories, or fabric-based circ...

SKU: SF-COM-08285 | Brand: SparkFun

A pack of super bright green LEDs in the standard 5 mm (T1¾) package with clear lenses. At 12,000 mcd, these LEDs deliver exceptional brightness suitable for indicators, lighting effects, and high-visibility projects....

SKU: SF-COM-09590 | Brand: SparkFun

LEDs - those blinky things. A must have for power indication, pin status, opto-electronic sensors, and fun blinky displays. This is a very basic 5mm LED with a red lens. It has a typical forward voltage of 2.0V and...

SKU: SF-COM-12062 | Brand: SparkFun

We all know that you can never get too many LEDs. Don’t worry, we’ve got you covered. This is a pack of basic red, yellow, blue and green 5mm LEDs (5 of each) all conveniently packaged in a nice reusable ESD safe bag.

SKU: AF-1442 | Brand: Adafruit

A 16mm illuminated pushbutton with a built-in red LED and latching on/off action. Press once to switch on, press again to switch off — ideal for power switches, mode selectors, and control panels. The LED is wired in...

SKU: EF-EF04091 | Brand: ElecFreaks

Octopus Single RGB Rainbow LED is one of the single rainbow LED electronic bricks in OCTOPUS series. The basic design is upon the OCTOPUS electronic bricks series with the identical design on the outlook, PCB fi...

SKU: LB-FLICKER | Brand: Little Bird

Looking to make a candle?  Want a flicking LED without the effort of programming it?Look no further than these Flame Flickering LEDs.Great for all your paper circuit projects to give a random flickering effect.Ch...

SKU: AF-1439 | Brand: Adafruit

A 16mm illuminated pushbutton with a built-in red LED and momentary action. The switch contacts connect only while the button is held down and return to their normally-open state when released — perfect for trigger in...

SKU: SF-COM-11452 | Brand: SparkFun

These color-changing LEDs take the work out of creating crazy, flashy, blinky… ness. Simply apply power and the LED will cycle through the RGB colorspace: no external controller necessary! These bright and festive LED...

SKU: SF-COM-00533 | Brand: SparkFun

LEDs - those blinky things. A must have for power indication, pin status, opto-electronic sensors, and fun blinky displays. This is a very standard red LED. The lens is 3mm in diameter, and is diffused.

SKU: SF-COM-11372 | Brand: SparkFun

LEDs - those blinky things. A must have for power indication, pin status, opto-electronic sensors, and fun blinky displays. This is a very basic 5mm LED with a blue lens. It has a typical forward voltage of 3.4V and ...

SKU: SF-COM-12903 | Brand: SparkFun

Sometimes when you have too many choices, it’s hard to make a good decision. In fact, there are times when you just want a bag of LEDs, just one of each, that’s all you want. Well too bad, you are getting two of each!...

SKU: AF-3377 | Brand: Adafruit

Add a little sparkle to your wearable project with Adafruit LED Sequins. These tiny sewable LED boards are the simpler sibling of Flora NeoPixels — they display a single colour with no digital control needed, making t...

SKU: AF-679 | Brand: Adafruit

These are very interesting 5mm diffused RGB LEDs - instead of having 4 pins to control 3 LEDs, they have only two leads - power and ground. When powered, the LEDs perform a slow fade through the rainbow, from re...

SKU: AF-5487 | Brand: Adafruit

These ultra-fine wired LEDs are designed for model-makers and crafters but they could also come in handy for folks who want to add tiny points of light to a design without needing SMT-level soldering skills. Use ...

SKU: AF-1756 | Brand: Adafruit

Add a little sparkle to your wearable project with Adafruit LED Sequins. These tiny sewable LED boards are the simpler sibling of Flora NeoPixels — they display a single colour with no digital control needed, making t...

SKU: AF-301 | Brand: Adafruit

Need some really bright LEDs? We are big fans of these clear blue LEDs, in fact we use them exclusively in our kits. They are very bright and have about 20degree LED beam. They go easily into a breadboard and will add...

SKU: AF-1476 | Brand: Adafruit

A 16mm illuminated pushbutton with a built-in blue LED and latching on/off action. Press once to switch on, press again to switch off — ideal for power switches, mode selectors, and control panels. The LED is wired i...

SKU: AF-2343 | Brand: Adafruit

These APA102C (DotStar) RGB LEDs feature an integrated driver chip inside each 5050 SMD package, giving you individually addressable 24-bit colour control (8 bits each for red, green, and blue). The same smart LED use...

SKU: SF-COM-08862 | Brand: SparkFun

Huge 10mm through-hole LEDs. Mood light an entire wall! Features: 625-630nm Red 2.1-2.3VDC Forward Voltage 80mA Forward Current 30 degree viewing angle 10,000-12,000 MCD output Documents: Datasheet LED Tutorial