Individual LEDs

SKU: SF-COM-12062 | Brand: SparkFun

We all know that you can never get too many LEDs. Don’t worry, we’ve got you covered. This is a pack of basic red, yellow, blue and green 5mm LEDs (5 of each) all conveniently packaged in a nice reusable ESD safe bag.

SKU: SF-COM-11372 | Brand: SparkFun

LEDs - those blinky things. A must have for power indication, pin status, opto-electronic sensors, and fun blinky displays. This is a very basic 5mm LED with a blue lens. It has a typical forward voltage of 3.4V and ...

SKU: SF-COM-12903 | Brand: SparkFun

Sometimes when you have too many choices, it’s hard to make a good decision. In fact, there are times when you just want a bag of LEDs, just one of each, that’s all you want. Well too bad, you are getting two of each!...

SKU: AF-301 | Brand: Adafruit

Need some really bright LEDs? We are big fans of these clear blue LEDs, in fact we use them exclusively in our kits. They are very bright and have about 20degree LED beam. They go easily into a breadboard and will add...

SKU: AF-1476 | Brand: Adafruit

A 16mm illuminated pushbutton with a built-in blue LED and latching on/off action. Press once to switch on, press again to switch off — ideal for power switches, mode selectors, and control panels. The LED is wired i...

SKU: AF-1477 | Brand: Adafruit

A 16mm illuminated pushbutton with a built-in blue LED and momentary action. The switch contacts connect only while the button is held down and return to their normally-open state when released — perfect for trigger i...

SKU: AF-5490 | Brand: Adafruit

These ultra-fine wired LEDs are designed for model-makers and crafters but they could also come in handy for folks who want to add tiny points of light to a design without needing SMT-level soldering skills. Use ...

SKU: SF-COM-10635 | Brand: SparkFun

A 10 mm through-hole blue LED with a diffused lens. The opaque epoxy package produces a soft, even glow rather than a focused beam, making it ideal for indicators and decorative lighting where a wide viewing angle is ...

SKU: SF-COM-13326 | Brand: SparkFun

Sometimes when you have too many choices, it’s hard to make a good decision. In fact, there are times when you just want a bag of LEDs, just one of each, that’s all you want. Well here you go! The LED Mixed Bag con...

SKU: AF-780 | Brand: Adafruit

Need some indicators? We are big fans of these diffused blue LEDs, as featured in the LoL shield. They are really bright so they can be seen in daytime, and from any angle. They go easily into a breadboard and will ad...

SKU: LB-LR0280-100-B | Brand: Little Bird

A bulk pack of 100 blue 10mm through-hole LEDs with a diffused lens. The opaque epoxy package produces a soft, even glow rather than a harsh point of light. Key Features Diffused Lens – Soft, even glow with wide li...

SKU: EF-EF04036 | Brand: ElecFreaks

Octopus Electronic Bricks, you can use them build electronics projects just as easy as piling bricks. By using Octopus electronic bricks, you may connect Arduino/Freaduino compatible boards easily with various digi...

SKU: SF-COM-14977 | Brand: SparkFun

A convenient pack of 20 assorted 5mm LEDs with built-in resistors — no need to calculate or add external current-limiting resistors. Simply connect to 3.0–5.0V and you're ready to go, making these perfect for quick pr...

SKU: SF-COM-14562 | Brand: SparkFun

Blue 5 mm LEDs with a built-in current-limiting resistor. No external resistor needed — simply connect to 3.0–5 V and the integrated resistor prevents burnout. Packaged in reusable ESD-safe bags. Specifications Siz...

SKU: SF-COM-08860 | Brand: SparkFun

Huge 10mm through-hole LEDs. Mood-light an entire wall! Features: 465-470nm Blue 3.0-3.4VDC Forward Voltage 80mA Forward Current 30 degree viewing angle 8,000-10,000 MCD output Documents: Datasheet LED Tutorial