ICs and Microchips

SKU: AF-2202 | Brand: Adafruit

IC sockets let you insert and remove chips easily from assembled kits and projects — no desoldering required. Solder the socket into your PCB or protoboard, then simply press the chip in when you're ready. Swap chips ...

SKU: SF-DEV-15096 | Brand: SparkFun

This SparkFun Serial Basic Breakout is an easy-to-use USB-to-Serial adapter based on the CH340G and takes advantage of the handy USB-C connector. With USB-C you can get up to three times the power delivery over the pr...

SKU: SF-COM-15099 | Brand: SparkFun

Add another eight pins to your microcontroller using a MCP23008 port expander. The MCP23008 uses two I2C pins which can be shared with other I2C devices, and in exchange gives you eight general purpose pins. You can s...

SKU: AF-1378 | Brand: Adafruit

The WS2811 is the driver IC used in NeoPixel LED strips and pixels. In this SOIC-8 package, it lets you build your own addressable RGB LEDs by driving a single common-anode RGB LED or three individual single-colour LE...

SKU: AF-1872 | Brand: Adafruit

This 8 MHz ceramic resonator is a breadboard-friendly oscillator with built-in load capacitors, making it a simple drop-in timing source for microcontrollers. With 0.5% accuracy, it's well suited for everyday electron...

SKU: SF-DEV-10524 | Brand: SparkFun

The name says it all on this one. An ATmega328 in DIP package, pre-loaded with the Arduino Optiboot (Uno 16MHz) Bootloader. This will allow you to use Arduino code in your custom embedded project without having to ...

SKU: AF-2045 | Brand: Adafruit

The Adafruit Si5351A Clock Generator Breakout lets you generate precise, arbitrary clock frequencies from 8 kHz to over 150 MHz using a simple I2C interface. With a precision 25 MHz crystal reference and internal PLLs...

SKU: LB-LS5006 | Brand: Little Bird

This assortment pack contains 50 linear voltage regulators across 10 popular types, giving you a handy selection for power supply projects and prototyping. All regulators are in the TO-220 package and cover a wide ran...

SKU: DF-DFR1185 | Brand: DFRobot

##Introduction The Fermion: I2C Address Shifter is a compact module designed to simplify the process of changing the I2C addresses of sensors in a development system. This module allows developers to easily modify sen...

SKU: SF-COM-18076 | Brand: SparkFun

The GD25Q40C is a 4 Mbit (512 KB) serial flash memory chip supporting standard, dual, and quad SPI interfaces. With clock speeds up to 120 MHz and quad I/O transfer rates reaching 480 Mbits/s, it provides fast non-vol...

SKU: AF-4763 | Brand: Adafruit

These little chips are like miniature SSD drives for your electronics. When you don't need something with as much storage as a micro SD card, but an EEPROM is too small, SPI (or QSPI) Flash chips give you on-the-order...

SKU: SF-BOB-16281 | Brand: SparkFun

The SparkFun RV-8803 Real Time Clock Module is a Qwiic-enabled breakout for the RV-8803 RTC, featuring a factory-calibrated temperature-compensated crystal for extremely precise timekeeping. It tracks hundredths of se...

SKU: SF-PRT-14765 | Brand: SparkFun

The SparkFun Single Supply Logic Level Converter is logic level and power supply translator in one small package. This little board breaks out the Texas Instruments TXB0104 4-bit bi-directional voltage-level tran...

SKU: SF-BOB-14558 | Brand: SparkFun

Get with the times, already! This SparkFun Real Time Clock (RTC) Module is a Qwiic-enabled breakout board for the RV-1805 chipset. The RTC is ultra-low power (running at only about 22nA in its lowest power settin...

SKU: AF-2207 | Brand: Adafruit

These 40-pin IC sockets let you insert and remove DIP chips without soldering them directly to your PCB. Solder the socket into your board once, then swap chips freely — useful for prototyping, testing, or any project...

SKU: AF-1455 | Brand: Adafruit

The Adafruit 12-Channel 16-bit PWM LED Driver uses the TLC59711 chip to provide 12 channels of constant-current, 16-bit PWM output — the highest resolution PWM driver available. Designed specifically for precision LED...

SKU: AF-2214 | Brand: Adafruit

A 12.000MHz quartz crystal in a standard HC49/US short-style package with two 20pF load capacitors included. The crystal has 30PPM tolerance and 50PPM stability, making it precise enough for USB timing, long-term time...

SKU: DF-FIT0295 | Brand: DFRobot

An assortment of 35 crystal oscillators covering 7 of the most commonly used frequencies. Keep them on hand for microcontroller projects, prototyping, and circuit experiments — no more hunting for the right crystal wh...

SKU: SF-BOB-11771 | Brand: SparkFun

This is a breakout board for the Texas Instruments TXB0104 module. The TXB0104 is a 4-bit bidirectional voltage-level translator with automatic direction sensing. This 4-bit noninverting translator uses two separate...

SKU: SF-BOB-13830 | Brand: SparkFun

The CY7C65213 USB to UART serial breakout is designed to provide users with a means to access all available I/O pins on the IC, and to provide a 6-pin UART header that is compatible with other SparkFun breakout boa...