ICs and Microchips

SKU: EC-CIN3232RT | Brand: Elecrow

This module can be used to convert the RS232 voltage of PC to TTL voltage that used by microcontroller. Directly plug the DB9 connector your PC then you can communicate with the microcontrollers using the Serial port....

SKU: SF-COM-10803 | Brand: SparkFun

PICAXE-08M2 microcontroller chip. PICAXE is a neat entry-level microcontroller system that is relatively cheap to get started with. The chip is programmed with a simple serial connection and the BASIC development e...

SKU: SF-BOB-11189 | Brand: SparkFun

The ‘must have’ IC for TTL/CMOS projects finally has its own breakout board! This is the RS232 converter IC that is capable of running at 3V and communicating with 5V logic.We’ve taken the SOIC package MAX3232 and bro...

SKU: SF-COM-10187 | Brand: SparkFun

The new generation 18 pin PICAXE microcontroller now has parallel tasking, touch sensors and more memory/RAM. See the Info Sheet for a comparison of features between the 18M2 and the 18M2+ PICAXE is a neat entr...

SKU: DF-DFR0077 | Brand: DFRobot

This converter uses MAX202-based level shifter for converting TTL (Transistor-Transistor Logic) -level serial to standard RS232 serial.RS232 is widely used in radio modifications,phone flash, XBOX360 flash, GPS, vehic...

SKU: SF-DEV-15096 | Brand: SparkFun

This SparkFun Serial Basic Breakout is an easy-to-use USB-to-Serial adapter based on the CH340G and takes advantage of the handy USB-C connector. With USB-C you can get up to three times the power delivery over the pr...

SKU: SF-BOB-13830 | Brand: SparkFun

The CY7C65213 USB to UART serial breakout is designed to provide users with a means to access all available I/O pins on the IC, and to provide a 6-pin UART header that is compatible with other SparkFun breakout boa...

SKU: SF-BOB-10124 | Brand: SparkFun

This is a breakout board for the SP3485 RS-485 transceiver IC, which will convert a UART serial stream to RS-485. The SP3485 is a half-duplex transceiver, so it can only communicate one way at a time, but it can re...

SKU: AF-6253 | Brand: Adafruit

The Adafruit RS-232 Full Breakout with DE9-M lets you interface any 3.3 V microcontroller or single-board computer with RS-232 devices using all 8 data/flow-control signals. Built around the trusted TI MAX3243, it gen...

SKU: SF-BOB-09822 | Brand: SparkFun

This is the newest revision and fixes issues with the last board. This breakout board pairs an SP3485 RS-485 transceiver with an FT232RL USB UART IC to convert a USB stream to RS-485. The SP3485 is a half-duplex tr...

SKU: SF-PRT-08780 | Brand: SparkFun

A compact RS232-to-TTL level shifter board that converts both TX and RX lines bidirectionally. Powered from your target application's supply voltage, it automatically converts RS232 signals to match — run it at 5 V fo...

SKU: SF-DEV-14050 | Brand: SparkFun

The SparkFun Serial Basic Breakout is an easy-to-use USB-to-Serial adapter based on the CH340G IC from WCH. It works with 5V and 3.3V systems and should auto install on most operating systems without the need for a...

SKU: SF-PRT-00449 | Brand: SparkFun

The smallest and easiest to use serial conversion circuit on the market! This board has one purpose in life - to convert RS232 to TTL and vice versa (TX and RX). This will allow a microcontroller to communicate with a...

SKU: SF-BOB-12731 | Brand: SparkFun

This is the SparkFun USB to Serial Breakout for the FT232RL, a small board with a built in USB to serial UART interface. This little breakout is built around the FT232RL IC from FTDI, with an internal oscillator, EEPR...