ICs and Microchips
Shop integrated circuits and microchips for your next electronics project. Our range includes timer ICs, logic gates, voltage regulators, op-amps, ADCs, and level shifters — essential building blocks for hobbyist, STEM, and professional designs.
Whether you're learning digital logic, building a power supply, or prototyping a sensor circuit, you'll find the right IC here. Fast shipping across Australia from our local warehouse.
SparkFun Logic Level Converter - Bi-Directional
SKU: SF-BOB-12009 | Brand: SparkFun
The SparkFun Bi-Directional Logic Level Converter safely translates signals between different voltage levels — stepping 5V down to 3.3V and 3.3V up to 5V on the same channel. It also works with 2.8V and 1.8V devices, ...
Delivered by Mon 17 Aug
TXB0104 Bi-Directional Level Shifter [TXB0104]
SKU: AF-1875 | Brand: Adafruit
Because the Arduino (and Basic Stamp) are 5V devices, and most modern sensors, displays, flash cards and modes are 3.3V-only, many makers find that they need to perform level shifting/conversion to protect the 3.3V de...
Delivered by Mon 17 Aug
SparkFun Opto-isolator Breakout
SKU: SF-BOB-09118 | Brand: SparkFun
This is a board designed for opto-isolation. This board is helpful for connecting digital systems (like a 5V microcontroller) to a high-voltage or noisy system. This board electrically isolates a controller from the h...
Delivered by Mon 17 Aug
SparkFun Multiplexer Breakout - 8 Channel (74HC4051)
SKU: SF-BOB-13906 | Brand: SparkFun
The SparkFun Multiplexer Breakout provides access to all pins and features of the 74HC4051, an 8-channel analog multiplexer/demultiplexer. The 74HC4051 allows you to turn four I/O pins into eight multifunctional, indi...
Delivered by Mon 17 Aug
NPN to PNP Signal Converter / Adapter Module
SKU: DF-FIT0850 | Brand: DFRobot
This NPN to PNP signal converter module bridges the gap when your sensor outputs an NPN signal but your controller or PLC expects a PNP input. Simply wire it inline between the sensor and the controller to convert the...
Delivered by Mon 17 Aug
SparkFun Qwiic GPIO
SKU: SF-DEV-17047 | Brand: SparkFun
The SparkFun Qwiic GPIO adds eight additional digital I/O pins to your project via I2C, based on the TCA9534 I/O Expander from Texas Instruments. Read and write pins just like standard Arduino digital pins using the i...
Delivered by Mon 17 Aug
SparkFun MOSFET Power Switch and Buck Regulator (Low-Side)
SKU: SF-COM-23979 | Brand: SparkFun
Does your microcontroller need to control a high-voltage item, like a 12V LED strip, while also needing to be powered? Do you want to avoid having multiple power adapters and microcontrollers for your project? The MOS...
Delivered by Mon 17 Aug
SparkFun Logic Level Converter - Single Supply
SKU: SF-PRT-14765 | Brand: SparkFun
The SparkFun Single Supply Logic Level Converter is logic level and power supply translator in one small package. This little board breaks out the Texas Instruments TXB0104 4-bit bi-directional voltage-level tran...
Delivered by Mon 17 Aug
SparkFun MOSFET Power Controller
SKU: SF-PRT-11214 | Brand: SparkFun
MOSFETs are awesome. They’re like a switch that you flip electronically! This SparkFun MOSFET Power Controller makes it easy to switch a battery supply on and off using your favorite microcontroller. The board also ha...
Delivered by Mon 17 Aug
Graphic Equalizer Display Filter - MSGEQ7
SKU: SF-COM-10468 | Brand: SparkFun
The MSGEQ7 is a CMOS graphic equaliser IC that divides the audio spectrum into seven frequency bands: 63 Hz, 160 Hz, 400 Hz, 1 kHz, 2.5 kHz, 6.25 kHz, and 16 kHz. Each band is peak-detected and multiplexed to provide ...
Delivered by Mon 17 Aug
