Headers & Connectors

SKU: PL-1025 | Brand: Pololu

The 0.100″ (2.54 mm) 2×5-Pin Straight Female Header is a double-row, 10-pin socket strip designed to mate with standard 0.1″ pitch male headers. The 2×5 configuration is one of the most widely used dual-row sizes, mat...

SKU: AF-392 | Brand: Adafruit

Breakaway header is like the duct tape of electronics. Its great for connecting things together, soldering to perf-boards, fits into any breakout or breadboard, etc. We go through these guys real fast, and thought ...

SKU: PL-1912 | Brand: Pololu

These 2×4-pin crimp connector housings let you quickly build custom cables that mate with standard 0.1" (2.54mm) spaced connectors. Pair them with pre-crimped terminal wires to create reliable, removable eight-wire co...

SKU: PL-1903 | Brand: Pololu

These 1×4-pin crimp connector housings let you quickly build custom cables that mate with standard 0.1" (2.54mm) spaced connectors. Pair them with pre-crimped terminal wires to create reliable, removable four-wire con...

SKU: SF-PRT-10374 | Brand: SparkFun

A simple 4-pin jumper wire cable with JST RE connectors on both ends. Great for jumping between boards or connecting to standard 0.1" (2.54 mm) breakaway headers. Specifications Pins – 4 Pitch – 0.1" (2.54 mm) Le...

SKU: SF-PRT-12693 | Brand: SparkFun

This is a row of 40 break away headers spaced 0.1" apart with long pins on both sides. This header is especially useful when you need to connect a PCB to a solderless breadboard. Each header can be broken apart to ...

SKU: AF-737 | Brand: Adafruit

This power distribution bus is machined from a single piece of solid brass, providing a reliable way to distribute power across multiple wires in a project. Seven screw-terminal holes accept wires of 20 AWG or larger ...

SKU: SF-PRT-09914 | Brand: SparkFun

This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST connector on one end, bare cable on the opposite end. It also comes with the mating connector fo...

SKU: DF-FIT0513 | Brand: DFRobot

A pack of 10 Gravity-series 4-pin sensor cables, 30 cm long, for connecting I2C or UART sensors to Gravity-compatible boards. Each cable has a PH2.0 4-pin connector on one end and a XH2.54 DuPont connector on the othe...

SKU: AF-3525 | Brand: Adafruit

Are you looking to jumper two neighboring male headers (2.54mm apart) without the hassle of maneuvering and re-maneuvering wires? Well then you've jumped to the right page!This pack of ten (10) 2.54mm jumpers is ...

SKU: LB-3-JST | Brand: Little Bird

A pack of ten 30 cm adapter cables, each with a 3-pin JST connector on one end and a standard female servo connector on the other. Ideal for connecting servos to receivers, controllers, or any device that uses a JST-s...

SKU: AF-5764 | Brand: Adafruit

The Adafruit TRRS Jack Breakout Board provides easy access to all four contacts of a 3.5mm TRRS (Tip-Ring-Ring-Sleeve) audio jack — commonly used for stereo audio plus a microphone channel, as found on mobile phone he...

SKU: AF-5617 | Brand: Adafruit

Snap action blocks are perfect when you have to quickly wire up a bunch of free-hanging components, and you don't want to solder. They're much easier to use than wire nuts, and of course, they are reuseable and do not...

SKU: DF-FIT0896 | Brand: DFRobot

Note: One package has 10 cables.This high-quality 30cm digital sensor cable is equipped with 3 pin PH2.0 plug connector on one side and Dupont male connector on the other side. One package has 10 cables. Compatib...

SKU: AF-5359 | Brand: Adafruit

If you love power adapters or toys & gadgets that have magnetic connections, you can now experiment with these futuristic connectors easily. It's sorta like a DIY "MagSafe-styled" connector, with five 0.1" spaced cont...

SKU: AF-5090 | Brand: Adafruit

A matching pair of 6-pin JST PH compatible cables with inline plug and socket connectors. Each cable is 20 cm long with stranded 26 AWG wires, providing a reliable and compact connection that can carry a couple of amp...

SKU: AF-4722 | Brand: Adafruit

This matching pair of 1.25 mm pitch 4-pin cables includes an inline socket and plug connector, providing a complete Molex PicoBlade-compatible connection set. At 40 cm long, these cables offer plenty of reach for inte...

SKU: SF-PRT-16499 | Brand: SparkFun

A 6-position PCB-mount screw terminal block with 2.54mm (0.1") pitch, compatible with standard perfboard and breadboard spacing. Accepts 30–18AWG wire for secure, solderless connections. Specifications Positions – ...

SKU: SF-PRT-16279 | Brand: SparkFun

These stackable headers are made to work with the SparkFun Qwiic Shield for Arduino Nano or any comparable shield to connect the shield with a Arduino Nano footprint. This set includes two 15-pin headers; the pins ...

SKU: EF-EF11096 | Brand: ElecFreaks

Specially designed to connect to seeed studio sensors, seeed Sudio sensors can be used on sensor:bit, octopus:bit, Wukong or other expansion boards. Only ordinary seeed studio sensors can be connected, IIC devices ...