Headers & Connectors

SKU: SF-PRT-14275 | Brand: SparkFun

This 2x20 male header has the same number and spacing of pins as a Raspberry Pi but is best served when used in conjunction with the Pi Zero since they come with a space of unpopulated headers. This through-hole he...

SKU: AF-5583 | Brand: Adafruit

These Socket Headers alone are, well, lonely. But pair them with the Raspberry Pi Pico, and you're in business!Socket headers are like the duct tape of electronics. They're great for connecting things, ...

SKU: AF-2223 | Brand: Adafruit

Connect your own PCB to a Raspberry Pi B+ and stack on top with this normal-height female header with extra long pins.  The female header part is about 8.5mm tall, good for small HATs that do not to clear t...

SKU: AF-5585 | Brand: Adafruit

These Socket Headers alone are, well, lonely. But pair them with the Raspberry Pi Pico, and you're in business!These headers are particularly cute and tiny with a body height of just 5.0 mm they are the...

SKU: AF-4855 | Brand: Adafruit

A 2×2 (4-pin) female socket riser header with standard 2.54 mm (0.1 in) pitch, designed to fit the PoE header on the Raspberry Pi 3 B+ and 4. Use it alongside a 2×20 stacking header to raise the PoE HAT high enough to...

SKU: SF-PRT-14017 | Brand: SparkFun

This 2x20 “tall” header has the same number and spacing of pins as a Raspberry Pi and provides your board with the ability to extend the heights of your GPIO to accommodate for enclosures or other parts that can en...

SKU: AF-2222 | Brand: Adafruit

Connect your own PCB to a Raspberry Pi B+ with this normal-height female header.  The female header part is about 8.5mm tall, good for small HATs that do not to clear the USB/Ethernet jacks. This header has 3m...

SKU: AF-2187 | Brand: Adafruit

A custom-made 2×20 short female header designed for surface-mount (SMT) Raspberry Pi HAT designs. This header provides the slimmest possible profile when you need a low-clearance connection between your HAT and a Rasp...

SKU: AF-2822 | Brand: Adafruit

If we could eat headers, we'd have them for breakfast, lunch, and dinner.  But we can't :( So we're making the best of it and selling them! This 2x20-pin strip male header is a great way to a...

SKU: AF-1993 | Brand: Adafruit

This 2×20 (40-pin) IDC box header is the matching connector for 40-pin GPIO ribbon cables used with Raspberry Pi models that have a 40-pin GPIO header. Solder it onto perfboard to create a breakout point for your Pi's...

SKU: SF-PRT-12807 | Brand: SparkFun

A standard 2×3 male through-hole header with 0.1″ (2.54 mm) pin spacing. This is the common configuration used for ISP (In-System Programming) connectors on AVR microcontroller boards and programmers. Key Features ...

SKU: AF-3413 | Brand: Adafruit

If your soldering isn't quite up to scratch, or you just don't own a soldering iron yet, then these nifty hammer headers from Pimoroni might be just what you need. They come in both male and female, and use crafty ...

SKU: AF-5357 | Brand: Adafruit

This double-row 2×17 (34-pin) IDC box header with 2.54 mm (0.1″) pitch is commonly used for floppy disk drive interfaces and other legacy 34-pin IDC ribbon cable connections. The keyed box header ensures correct cable...

SKU: SF-PRT-16764 | Brand: SparkFun

This 2x20 pin female header is meant to allow you to extend the reach of any board with the standard 2x20 GPIO pin footprint like the Raspberry Pi, Google Coral, and NVIDIA Jetson. You can also solder it to Pi HATs th...

SKU: SF-PRT-15362 | Brand: SparkFun

This is a super small, 2x5 pin male PTH header. This header is in the common configuration for JTAG applications. Each pin has a spacing of 1.27mm in between each other and can be cut down to smaller increments if the...

SKU: AF-4079 | Brand: Adafruit

This 2×20 female socket riser header features slightly longer-than-standard pins, adding extra height between your Raspberry Pi and any HAT, Bonnet, or pHAT mounted on top. This additional clearance helps boards clear...

SKU: AF-4048 | Brand: Adafruit

A compact 1.27 mm (0.05") pitch 2×5 mini SWD box header with a half-shroud and key-notch. A smaller alternative to full-shroud SWD headers, taking up much less board space while remaining compatible with standard 10-p...

SKU: SF-PRT-13054 | Brand: SparkFun

A 2×20 shrouded (boxed) header designed to match the Raspberry Pi GPIO pinout. It provides a keyed, polarised connection point so you can run a ribbon cable from your Pi's GPIO to a breakout board, HAT prototype, or c...

SKU: AF-4904 | Brand: Adafruit

A 40-pin FPC to straight 2×20 IDC male plug header adapter board. Converts a standard 40-pin 0.5mm pitch FPC/FFC cable connection into a male GPIO plug, allowing you to connect HATs and Bonnets at a distance from your...

SKU: SF-PRT-16581 | Brand: SparkFun

A 2×18 pin female header with standard 0.1" (2.54 mm) pitch spacing. Mates perfectly with the Alchitry Br Prototype Element Board and other 0.1"-spaced dual-row male headers. Specifications Configuration – 2×18 (36...