Headers & Connectors

SKU: PI-COM0004 | Brand: Pimoroni

This extra-tall 2×20 female header is designed to connect custom PCBs and HATs to the Raspberry Pi GPIO pins. At 16.5 mm tall, it provides enough clearance for your board to sit above the Ethernet and USB jacks withou...

SKU: AF-1993 | Brand: Adafruit

This 2×20 (40-pin) IDC box header is the matching connector for 40-pin GPIO ribbon cables used with Raspberry Pi models that have a 40-pin GPIO header. Solder it onto perfboard to create a breakout point for your Pi's...

SKU: PI-COM1105 | Brand: Pimoroni

Absolutely no soldering required! All that's needed is a few gentle taps with a hammer and bazinga! Your header is securely attached to your Pi Zero or pHAT. If your soldering isn't quite up to scratch, or you just...

SKU: DF-FIT0105 | Brand: DFRobot

A pack of 10 long straight male header strips, each with 40 breakable pins at 2.54mm pitch. The extended 10mm pin length allows socket-to-socket connections, and the plastic separator can be repositioned along the pin...

SKU: DF-FIT0084-G | Brand: DFRobot

A pack of 10 green straight male pin header strips, each with 40 pins at standard 2.54 mm (0.1") spacing. These single-row headers are compatible with solderless breadboards, perforated prototyping PCBs, female header...

SKU: SF-PRT-10158 | Brand: SparkFun

These are a longer version of our standard break away headers. They are 20mm long which allows you use them socket to socket. The plastic separator can be slid up or down to accommodate your needs. You will ge...

SKU: AF-3413 | Brand: Adafruit

If your soldering isn't quite up to scratch, or you just don't own a soldering iron yet, then these nifty hammer headers from Pimoroni might be just what you need. They come in both male and female, and use crafty ...

SKU: SF-PRT-16764 | Brand: SparkFun

This 2x20 pin female header is meant to allow you to extend the reach of any board with the standard 2x20 GPIO pin footprint like the Raspberry Pi, Google Coral, and NVIDIA Jetson. You can also solder it to Pi HATs th...

SKU: AF-4079 | Brand: Adafruit

This 2×20 female socket riser header features slightly longer-than-standard pins, adding extra height between your Raspberry Pi and any HAT, Bonnet, or pHAT mounted on top. This additional clearance helps boards clear...

SKU: AF-2714 | Brand: Adafruit

An extra-tall 2×20 SMT (surface-mount) female header designed for Raspberry Pi HATs. The increased height provides additional clearance for stacking multiple HATs or accommodating taller components on the Pi, such as ...

SKU: SF-PRT-13054 | Brand: SparkFun

A 2×20 shrouded (boxed) header designed to match the Raspberry Pi GPIO pinout. It provides a keyed, polarised connection point so you can run a ribbon cable from your Pi's GPIO to a breakout board, HAT prototype, or c...

SKU: AF-3663 | Brand: Adafruit

If your soldering isn't quite up to scratch, or you just don't own a soldering iron yet, then these nifty hammer headers from Pimoroni might be just what you need.  Absolutely no soldering required! All t...

SKU: AF-4905 | Brand: Adafruit

A 40-pin FPC to straight 2×20 IDC female socket header adapter board. Converts a standard 40-pin 0.5mm pitch FPC/FFC cable connection into a Raspberry Pi-compatible GPIO socket, allowing you to extend or relocate your...

SKU: DF-FIT0084-R | Brand: DFRobot

A pack of 10 red straight male pin header strips, each with 40 pins at standard 2.54 mm (0.1") spacing. These single-row headers are compatible with solderless breadboards, perforated prototyping PCBs, female headers,...

SKU: DF-FIT0084-B | Brand: DFRobot

A pack of 10 blue straight male pin header strips, each with 40 pins at standard 2.54 mm (0.1") spacing. These single-row headers are compatible with solderless breadboards, perforated prototyping PCBs, female headers...

SKU: AF-1992 | Brand: Adafruit

Connect your own PCB to a Raspberry Pi B+ with this extra-tall female header. The female header part has extra spaces to make it 16.5mm tall: when placed on your Pi, a PCB will clear the Ethernet and USB ...

SKU: LB-LS3507 | Brand: Little Bird

This 2×20 pin tall female header extends the reach of any board with a standard 40-pin GPIO layout, including the Raspberry Pi, Google Coral, and NVIDIA Jetson. At 16 mm tall with standard 0.1″ (2.54 mm) spacing, it p...

SKU: PR-PIM296 | Brand: Little Bird

Absolutely no soldering required! All that's needed is a few gentle taps with a hammer and bazinga! Your header is securely attached to your Pi Zero or pHAT. If your soldering isn't quite up to scratch, or you just...

SKU: AF-2243 | Brand: Adafruit

A short-profile 2×20 female through-hole header for connecting Raspberry Pi HATs with minimal height above the board. This custom header provides a slimmer fit than standard-height GPIO headers, ideal for compact encl...

SKU: TB-HM3230 | Brand: Little Bird

A 40-pin single-row female header strip with standard 0.1" (2.54mm) spacing. This versatile header can be trimmed to any length you need, making it perfect for custom projects and Arduino-compatible builds. The socke...