Headers & Connectors

SKU: SF-PRT-28381 | Brand: SparkFun

This is a single-row straight male header with 14 breakaway pins on standard 0.1 inch (2.54mm) spacing. It is suited to through-hole prototyping, module headers and breadboard-friendly maker projects.The 14x1 format i...

SKU: SF-PRT-28872 | Brand: SparkFun

This male header strip gives you 14 gold-plated pins for making custom connections on PCBs, prototypes and general electronics projects.The double insulated header is designed as a break-to-fit strip, so you can cut i...

SKU: SF-PRT-29292 | Brand: SparkFun

This is a compact 2x3 male through-hole header with 2mm pin spacing, suitable for soldering into compatible PCBs and add-on boards.The connector is unshrouded, uses square male pins, and is designed for simple push-pu...

SKU: SF-PRT-29760 | Brand: SparkFun

This is a single row of 20 male header pins for prototyping, board-to-board connections, and adding plug-in pins to PCBs or maker projects.The pins use standard 0.1" (2.54mm) spacing, making them suitable for common b...

SKU: SF-PRT-30218 | Brand: SparkFun

This 6-pin male header is a simple, reliable connector for linking components, boards or cables in electronics projects.The right-angle layout routes the pins parallel to your PCB, making it useful for low-profile bui...

SKU: PR-PIM247 | Brand: Little Bird

If you're going to be adding and removing wires to a project, these 2.54 pitch headers are an ideal way to make it easy and reliable. This box has a useful selection. Maker Essentials are components and useful bits...

SKU: PR-PIM296 | Brand: Little Bird

Absolutely no soldering required! All that's needed is a few gentle taps with a hammer and bazinga! Your header is securely attached to your Pi Zero or pHAT. If your soldering isn't quite up to scratch, or you just...

SKU: PL-966 | Brand: Pololu

This double-row, 80-pin (2×40) straight male header strip with 0.1" (2.54mm) pitch is a versatile connector for electronics projects. The breakaway design lets you snap or cut it into any dual-row length you need. St...

SKU: PL-1931 | Brand: Pololu

These male pins can be crimped on 22-28AWG wires and snapped into our crimp connector housings to create custom cables that are compatible with standard 0.1"-pitch headers and solderless breadboards. Our wires wit...

SKU: AF-85 | Brand: Adafruit

“How could something so simple be so useful?”  We heard once that in the 4th millenium B.C. some guy asked the person who invented the wheel that question.  The person who invented the wheel’s ...

SKU: AF-3144 | Brand: Adafruit

Are you frustrated by the lack of customization options for your jumper wires? Look no further! Compatible with both male and female wires, these fully customizable wire housings bring DIY to a new level, giving yo...

SKU: AF-5087 | Brand: Adafruit

A matching pair of 3-pin JST PH compatible cables with inline plug and socket connectors. Each cable is 20 cm long with stranded 26 AWG wires, providing a reliable and compact connection that can carry a couple of amp...

SKU: AF-5089 | Brand: Adafruit

A matching pair of 5-pin JST PH compatible cables with inline plug and socket connectors. Each cable is 20 cm long with stranded 26 AWG wires, providing a reliable and compact connection that can carry a couple of amp...

SKU: AF-5755 | Brand: Adafruit

If you're fancying to connect to the debug port on a Pico WH, or the two ports on a Pico Debug Probe or anything else with a JST SH compatible 3-pin connector, this cable will do the trick. It has a 1mm pitch JST S...

SKU: AF-4924 | Brand: Adafruit

This 1.25 mm pitch 4-pin cable is a compact, Molex PicoBlade-compatible connector cable for projects where standard 0.1″ headers are too bulky. At 20 cm long, it provides a convenient connection length for internal wi...

SKU: AF-4149 | Brand: Adafruit

A pack of ten white 36-pin break-away male headers with standard 0.1" (2.54 mm) pitch. These are identical to standard break-away headers but feature white plastic instead of the classic black — great for colour-coded...

SKU: LB-00052 | Brand: Little Bird

This 1×2-pin crimp connector housing lets you quickly build custom two-wire cables that mate with standard 0.1" (2.54mm) spaced connectors. Pair it with pre-crimped terminal wires or crimp pins to create reliable, rem...

SKU: TB-HM3403 | Brand: Little Bird

A 3-pin single-row crimp connector housing with 2.54 mm (0.1") pitch, designed for PCB-to-PCB or cable-to-PCB connections. The white nylon wafer housing features locking and polarising, with tin-plated brass pins that...

SKU: AF-2270 | Brand: Adafruit

The "poor woman's" Raspberry Pi A+ / B+ / Pi 2 cobbler! This combo of 2x20 pin (0.1 spaced) header and socket is for our popular GPIO Ribbon Cable for Raspberry Pi Model A+/B+/Pi 2 (40 pins).  It comes in...

SKU: SF-PRT-13156 | Brand: SparkFun

This is a simple 2x8 male PTH header. This header is that you will find commonly used to interface with a basic 8x2 character LCDs. Each pin has a spacing of 0.1" in between each other.Documents:Datasheet