Headers & Connectors

SKU: AF-4909 | Brand: Adafruit

A 40-pin FPC to right-angle 2×20 IDC female socket header adapter board. Converts a standard 40-pin 0.5mm pitch FPC/FFC cable connection into a Raspberry Pi-compatible GPIO socket, allowing you to extend or relocate y...

SKU: AF-4924 | Brand: Adafruit

This 1.25 mm pitch 4-pin cable is a compact, Molex PicoBlade-compatible connector cable for projects where standard 0.1″ headers are too bulky. At 20 cm long, it provides a convenient connection length for internal wi...

SKU: AF-4927 | Brand: Adafruit

A slim, reliable 1.25 mm pitch cable with 7-pin connectors on both ends and a 20 cm length. The friction-lock connectors provide a secure, satisfying click for lightweight connectivity where standard 0.1" headers or J...

SKU: SF-PRT-16766 | Brand: SparkFun

A surface-mount 4-pin JST connector in a vertical orientation, designed for the SparkFun Qwiic I2C ecosystem. This 1 mm pitch connector is used on all Qwiic-compatible boards and lets you build your own I2C devices th...

SKU: SF-PRT-16581 | Brand: SparkFun

A 2×18 pin female header with standard 0.1" (2.54 mm) pitch spacing. Mates perfectly with the Alchitry Br Prototype Element Board and other 0.1"-spaced dual-row male headers. Specifications Configuration – 2×18 (36...

SKU: DF-FIT0627 | Brand: DFRobot

What do you do if you find that the line length is not enough when you do a project with Boson Kit? Or you find out the interface of Boson module is not matched with the Arduino IO expansion shield when you want to co...

SKU: SF-PRT-15363 | Brand: SparkFun

A compact 2×5 pin female through-hole header with 1.27 mm (50 mil) pitch. This is the standard configuration used for JTAG and SWD debugging connections on microcontroller boards. Specifications Configuration – 2×5...

SKU: AF-2207 | Brand: Adafruit

These 40-pin IC sockets let you insert and remove DIP chips without soldering them directly to your PCB. Solder the socket into your board once, then swap chips freely — useful for prototyping, testing, or any project...

SKU: AF-3663 | Brand: Adafruit

If your soldering isn't quite up to scratch, or you just don't own a soldering iron yet, then these nifty hammer headers from Pimoroni might be just what you need.  Absolutely no soldering required! All t...

SKU: AF-1542 | Brand: Adafruit

These single-row right-angle female headers with 0.1" (2.54mm) pitch are an essential building block for electronics projects. Use them to add right-angle socket connections to perfboards, PCBs, and prototyping setups...

SKU: AF-2104 | Brand: Adafruit

This 2x8 (16 pin - 0.1" spaced) IDC Breadboard Helper is great in conjunction with any 16-pin IDC cables. It comes in two parts, a 'pin-through' socket and a male header. The socket straddles...

SKU: AF-2101 | Brand: Adafruit

The "poor woman's" Raspberry Pi cobbler! This combo of 2x13 pin (0.1 spaced) header and socket is for our popular GPIO Ribbon Cable for Raspberry Pi Model A and B.  It comes in two parts, a 'pin-through' socke...

SKU: PL-2706 | Brand: Pololu

This single-row, 6-pin right-angle female header with 0.1" (2.54mm) pitch is designed to mate with standard 0.1" male headers. The right-angle orientation routes connections parallel to the board surface, making it id...

SKU: AF-2270 | Brand: Adafruit

The "poor woman's" Raspberry Pi A+ / B+ / Pi 2 cobbler! This combo of 2x20 pin (0.1 spaced) header and socket is for our popular GPIO Ribbon Cable for Raspberry Pi Model A+/B+/Pi 2 (40 pins).  It comes in...

SKU: DF-FIT0104 | Brand: DFRobot

A pack of ten 8-pin female headers with standard 2.54 mm pitch, designed for use with Arduino boards. These headers are ideal for replacing damaged headers, building custom shields, or prototyping on breadboards and p...

SKU: DF-FIT0140 | Brand: DFRobot

These are two pin jumpers (also called shunts) that will create an electrical connection for the 2.54mm(0.1") male pin headers. Commonly used to modify settings on a board or device. APPLICATIONS Jumpering pi...

SKU: DF-FIT0148 | Brand: DFRobot

This product includes 2-pin 2.0mm mating connector housing(10 units) and crimp pins (20 units). They work with wires ranging from 28 to 26 AWG. SPECIFICATIONS 2-pin 2.0mm mating connector housing 28-26 AWG crim...

SKU: SF-PRT-14407 | Brand: SparkFun

Sometimes referred to as “spade connectors,” these quick disconnects are really useful as power connectors in prototyping or in projects that are repeatedly assembled and disassembled. The shape of these connectors al...

SKU: SF-PRT-09280 | Brand: SparkFun

This is a 6-pin female header, with extra long legs – great for stacking Arduino shields. Pins are spaced by 0.1". Documents: Datasheet

SKU: SF-PRT-09194 | Brand: SparkFun

A mixed pack of 100 premium jumper wires in assorted colours, ideal for breadboard prototyping and connecting to 0.1″ headers. The pack includes 50 male-to-male and 50 female-to-female wires, each 155 mm (6″) long. T...