Headers & Connectors

SKU: PL-1930 | Brand: Pololu

A pack of 100 female crimp pins designed for use with 0.1" (2.54mm) pitch crimp connector housings. Crimp these pins onto 22–28 AWG wires and snap them into housings to create custom cables compatible with standard he...

SKU: SF-PRT-16763 | Brand: SparkFun

This 2x20 pin female header is meant to allow you to extend the reach of any board with the standard 2x20 GPIO pin footprint like the Raspberry Pi, Google Coral, and NVIDIA Jetson. You can also solder it to Pi HATs th...

SKU: DF-FIT0151 | Brand: DFRobot

A screw-terminal adapter that converts a 5.5 × 2.1 mm centre-positive DC barrel jack connection to bare wire terminals. Plug in a barrel jack power supply on one end and connect the screw terminals to a breadboard, ci...

SKU: DF-FIT0210 | Brand: DFRobot

A pack of 50 crimp pins for 2.54 mm (0.1″) pitch female housing connectors. Use these pins with a crimping tool and compatible housings to create custom cables that mate with standard 2.54 mm male header pins. Specif...

SKU: AF-2830 | Brand: Adafruit

These two Female Stacking Headers alone are, well, lonely. But pair them with any of our Feather boards and you're in business! What do they do? They stack. Put the headers through your Feather and then you can ...

SKU: DF-FIT0299 | Brand: DFRobot

This kit includes PHR-2, PHR-3 and PHR-4 housing (20 units each), through-hole type shrouded header (20 units each) and crimp contact (100 units). SPECIFICATIONS Pitch:2.0mm ((0.079")) Current rating:2A AC,DC (AWG #2...

SKU: SF-PRT-10288 | Brand: SparkFun

This adapter allows you to connect a barrel jack connector to bare wires. One end has screw terminals and the other has a 5.5x2.1mm, center-positive female barrel jack. If you have a power supply with a barrel jack an...

SKU: SF-PRT-08430 | Brand: SparkFun

Premium female-to-female jumper wires, 155mm (6″) long, for connecting between male headers on development boards, breakout boards, and breadboards. The 0.1″ pitch connectors fit standard pin headers and can be instal...

SKU: AF-4928 | Brand: Adafruit

A slim, reliable 1.25 mm pitch cable with 8-pin connectors on both ends and a 20 cm length. The friction-lock connectors provide a secure, satisfying click for lightweight connectivity where standard 0.1" headers or J...

SKU: AF-4855 | Brand: Adafruit

A 2×2 (4-pin) female socket riser header with standard 2.54 mm (0.1 in) pitch, designed to fit the PoE header on the Raspberry Pi 3 B+ and 4. Use it alongside a 2×20 stacking header to raise the PoE HAT high enough to...

SKU: AF-3950 | Brand: Adafruit

This cable will let you turn a JST PH 4-pin cable port into 3 individual wires with high-quality 0.1" female sockets on the end. We're carrying these to match up with any of our boards with 'STEMMA' connectors o...

SKU: AF-1862 | Brand: Adafruit

A simple 2-pin connector soldered onto a breadboard-friendly breakout. This is compatible with the "JST PH 2-pin" connector. Mates perfectly with all our 1-cell LiPoly and LiIon batteries as well as our 6V coin ...

SKU: PL-1900 | Brand: Pololu

These single-pin crimp connector housings let you quickly build custom cables that mate with standard 0.1" (2.54mm) spaced connectors. Simply pair them with pre-crimped terminal wires or crimp pins to create reliable,...

SKU: AF-5244 | Brand: Adafruit

A 100 mm pigtail cable with a Seeed Grove connector on one end and four bare wires on the other, for connecting Grove-compatible boards and breakouts to custom wiring. Specifications Connector – Grove (2 mm pitch),...

SKU: SF-PRT-08272 | Brand: SparkFun

This 2 mm pitch 10-pin socket mates with XBee radio modules from Digi, allowing you to mount your XBee without soldering it directly to a PCB. You'll need two of these sockets to connect to all 20 pins on an XBee modu...

SKU: AF-1131 | Brand: Adafruit

A 500 mm extension cable with a JST-PH 2-pin socket on one end and a matching plug on the other. The colour-coded wires make it easy to verify correct polarity. Compatible with JST-PH terminated battery packs includin...

SKU: AF-1663 | Brand: Adafruit

A matching pair of 3-pin JST SM connector cables — one plug and one receptacle — for creating quick-connect/disconnect points in 3-wire circuits. The locking latch keeps the connection secure while still allowing easy...

SKU: DF-FIT0121 | Brand: DFRobot

Jumper wires are one of the most important gear component for the tinkerer. Often underestimated, but one of the first things to miss. If you are starting to assemble your tinker gear and wondering if this is really n...

SKU: SF-PRT-11895 | Brand: SparkFun

A standard 8-pin female header with 0.1" (2.54 mm) pitch, designed for through-hole mounting. Connects with most standard 8-pin male headers. Specifications Pins – 8 Pitch – 0.1" (2.54 mm) Type – Female, through-...

SKU: PL-1025 | Brand: Pololu

The 0.100″ (2.54 mm) 2×5-Pin Straight Female Header is a double-row, 10-pin socket strip designed to mate with standard 0.1″ pitch male headers. The 2×5 configuration is one of the most widely used dual-row sizes, mat...