Headers & Connectors

SKU: LB-JST-10 | Brand: Little Bird

A 10-pack of JST-PH 2-pin SMT right-angle connectors. This is the standard connector used on single-cell LiPo and Li-Ion batteries, making it essential for any battery-powered project. The right-angle orientation and ...

SKU: AF-4714 | Brand: Adafruit

We use 2 pin JST PH connectors for all our battery packs, and if you want to put a board in series, like our LC709203F Stemma QT battery gauge, this cable will be very handy! Both ends have a JST PH 2mm pitch 2-pin...

SKU: AF-1769 | Brand: Adafruit

This JST PH 2-pin SMT right-angle connector is a surface-mount header designed to accept standard JST PH 2-pin plugs. It's commonly used as a battery connector on microcontroller boards, LiPo chargers, and small elect...

SKU: DF-FIT0299 | Brand: DFRobot

This kit includes PHR-2, PHR-3 and PHR-4 housing (20 units each), through-hole type shrouded header (20 units each) and crimp contact (100 units). SPECIFICATIONS Pitch:2.0mm ((0.079")) Current rating:2A AC,DC (AWG #2...

SKU: AF-3950 | Brand: Adafruit

This cable will let you turn a JST PH 4-pin cable port into 3 individual wires with high-quality 0.1" female sockets on the end. We're carrying these to match up with any of our boards with 'STEMMA' connectors o...

SKU: AF-1862 | Brand: Adafruit

A simple 2-pin connector soldered onto a breadboard-friendly breakout. This is compatible with the "JST PH 2-pin" connector. Mates perfectly with all our 1-cell LiPoly and LiIon batteries as well as our 6V coin ...

SKU: AF-1131 | Brand: Adafruit

A 500 mm extension cable with a JST-PH 2-pin socket on one end and a matching plug on the other. The colour-coded wires make it easy to verify correct polarity. Compatible with JST-PH terminated battery packs includin...

SKU: AF-1663 | Brand: Adafruit

A matching pair of 3-pin JST SM connector cables — one plug and one receptacle — for creating quick-connect/disconnect points in 3-wire circuits. The locking latch keeps the connection secure while still allowing easy...

SKU: LB-3-JST | Brand: Little Bird

A pack of ten 30 cm adapter cables, each with a 3-pin JST connector on one end and a standard female servo connector on the other. Ideal for connecting servos to receivers, controllers, or any device that uses a JST-s...

SKU: AF-5090 | Brand: Adafruit

A matching pair of 6-pin JST PH compatible cables with inline plug and socket connectors. Each cable is 20 cm long with stranded 26 AWG wires, providing a reliable and compact connection that can carry a couple of amp...

SKU: AF-5088 | Brand: Adafruit

A matching pair of 4-pin JST PH compatible cables with inline plug and socket connectors. Each cable is 20 cm long with stranded 26 AWG wires, providing a reliable and compact connection that can carry a couple of amp...

SKU: SF-CAB-13685 | Brand: SparkFun

This is a simple jumper adapter cable that comes pre-terminated with a female JST connector on one end and a breadboard hookup pigtail on the other. This cable makes it easy to connect components with a JST connector ...

SKU: AF-5089 | Brand: Adafruit

A matching pair of 5-pin JST PH compatible cables with inline plug and socket connectors. Each cable is 20 cm long with stranded 26 AWG wires, providing a reliable and compact connection that can carry a couple of amp...

SKU: AF-4208 | Brand: Adafruit

A 10-pack of JST SH 4-pin right-angle connectors with 1 mm pitch through-hole mounting tabs. These are the standard connectors used with the Qwiic and STEMMA QT ecosystems, making it easy to add I2C connectivity to yo...

SKU: SF-CAB-14576 | Brand: SparkFun

These 4-pin JST-SM pigtail connectors mate perfectly with LED strips and other applications that require only two lines and an option for quick connection and disconnection. Even if you don’t have a specific use fo...

SKU: SF-CAB-14575 | Brand: SparkFun

These 3-pin JST-SM pigtail connectors mate perfectly with LED strips and other applications that require only two lines and an option for quick connection and disconnection. Even if you don’t have a specific use fo...

SKU: DF-FIT0150 | Brand: DFRobot

This product includes 4-pin 2.0mm(0.08") mating connector housing(10 units) and crimp pins (40 units). They work with wires ranging from 28 to 26 AWG. SPECIFICATIONS 4-pin 2.0mm mating connector housing 28 to 26 A...

SKU: DF-FIT0149 | Brand: DFRobot

A pack of 3-pin JST-style 2.0 mm pitch female connector housings with matching crimp pins. Ideal for making custom cables and connectors for sensors, servos, and other small electronics that use 2.0 mm pitch connector...

SKU: SF-PRT-10501 | Brand: SparkFun

This is a 2-pin JST RCY connector typically used for low-voltage applications running 10A or less. They are commonly found in RC vehicles. These come in a bag of 1 male plug, 1 female plug, plus pins to connect them b...

SKU: AF-5755 | Brand: Adafruit

If you're fancying to connect to the debug port on a Pico WH, or the two ports on a Pico Debug Probe or anything else with a JST SH compatible 3-pin connector, this cable will do the trick. It has a 1mm pitch JST S...