Headers & Connectors

SKU: AF-369 | Brand: Adafruit

If you need to connect a battery pack or wired power supply to a board that has a DC jack - this adapter will come in very handy! There is a 2.1mm DC plug on one end, and a screw terminal block on the other. The termi...

SKU: AF-5244 | Brand: Adafruit

A 100 mm pigtail cable with a Seeed Grove connector on one end and four bare wires on the other, for connecting Grove-compatible boards and breakouts to custom wiring. Specifications Connector – Grove (2 mm pitch),...

SKU: AF-1387 | Brand: Adafruit

Build custom USB connections without slicing apart a cable and soldering those thin internal wires. This DIY USB shell gives you a proper Type A male plug connector with easy-to-solder tabs and a two-part snap-togethe...

SKU: AF-3642 | Brand: Adafruit

A 2.1 mm DC barrel jack with a built-in slide switch, giving you simple on/off control for devices that lack a dedicated power switch. It shares the same PCB footprint as a standard non-switched barrel jack, so it dro...

SKU: SF-BOB-14021 | Brand: SparkFun

This is the SparkFun RJ11 Breakout, two simple breakout boards for the common 6-pin RJ11 connector. These little boards can easily have one of our RJ11 6-Pin Connectors to work with common telephone cables. Each bo...

SKU: SF-PRT-08272 | Brand: SparkFun

This 2 mm pitch 10-pin socket mates with XBee radio modules from Digi, allowing you to mount your XBee without soldering it directly to a PCB. You'll need two of these sockets to connect to all 20 pins on an XBee modu...

SKU: DF-FIT0365 | Brand: DFRobot

 INTRODUCTION Premium quality jumper wires for prototyping. Made with 26AWG multi-strand wire and sturdy male pins. Each jumper wire is approximately 210mm in length. Each pack comes with 30 jumper wires in a...

SKU: SF-PRT-10571 | Brand: SparkFun

These are simple 2-position screw terminals with 2.54mm pitch pins. Rated up to 150V @ 6A, this terminal can accept 30 to 18AWG wire. The 2.54mm pitch will line up with standard 0.1" perf boards.Documents: Datasheet

SKU: LB-LS3506 | Brand: Little Bird

This 2×20 pin extra tall male GPIO header stands 12 mm high, providing additional clearance when soldering onto HATs, Bonnets, or custom boards for Raspberry Pi. It's ideal for boards that don't come with headers pre-...

SKU: AF-3647 | Brand: Adafruit

Precision-machined Swiss-pin male plug headers for a tight, reliable fit. Unlike standard stamped square-pin male headers, these use machined round pins that pair exclusively with Swiss-pin female sockets — they are n...

SKU: AF-3662 | Brand: Adafruit

If your soldering isn't quite up to scratch, or you just don't own a soldering iron yet, then these nifty hammer headers from Pimoroni might be just what you need.  Absolutely no soldering required! All t...

SKU: SF-PRT-14017 | Brand: SparkFun

This 2x20 “tall” header has the same number and spacing of pins as a Raspberry Pi and provides your board with the ability to extend the heights of your GPIO to accommodate for enclosures or other parts that can en...

SKU: AF-2914 | Brand: Adafruit

A 3.5 mm (1/8") 4-pole TRRS audio plug with screw terminal connections — no soldering required. Use stranded or solid-core wire and a small screwdriver to create custom audio cables, breakouts, and test leads. TRRS s...

SKU: SF-PRT-11895 | Brand: SparkFun

A standard 8-pin female header with 0.1" (2.54 mm) pitch, designed for through-hole mounting. Connects with most standard 8-pin male headers. Specifications Pins – 8 Pitch – 0.1" (2.54 mm) Type – Female, through-...

SKU: SF-COM-11144 | Brand: SparkFun

A ¼″ (6.35mm) stereo audio jack in a right-angle panel-mount configuration. Switched contacts allow you to detect whether a plug is inserted. The jack mounts in an 11mm diameter panel hole and includes a plastic washe...

SKU: AF-392 | Brand: Adafruit

Breakaway header is like the duct tape of electronics. Its great for connecting things together, soldering to perf-boards, fits into any breakout or breadboard, etc. We go through these guys real fast, and thought ...

SKU: SF-PRT-12693 | Brand: SparkFun

This is a row of 40 break away headers spaced 0.1" apart with long pins on both sides. This header is especially useful when you need to connect a PCB to a solderless breadboard. Each header can be broken apart to ...

SKU: AF-5764 | Brand: Adafruit

The Adafruit TRRS Jack Breakout Board provides easy access to all four contacts of a 3.5mm TRRS (Tip-Ring-Ring-Sleeve) audio jack — commonly used for stereo audio plus a microphone channel, as found on mobile phone he...

SKU: AF-5617 | Brand: Adafruit

Snap action blocks are perfect when you have to quickly wire up a bunch of free-hanging components, and you don't want to solder. They're much easier to use than wire nuts, and of course, they are reuseable and do not...

SKU: AF-5359 | Brand: Adafruit

If you love power adapters or toys & gadgets that have magnetic connections, you can now experiment with these futuristic connectors easily. It's sorta like a DIY "MagSafe-styled" connector, with five 0.1" spaced cont...