Headers & Connectors

SKU: AF-1540 | Brand: Adafruit

Breakaway header is like the duct tape of electronics. Its great for connecting things together, soldering to perf-boards, fits into any breadboard, etc. We go through these guys real fast, and thought that given how ...

SKU: AF-1675 | Brand: Adafruit

A 150mm IDC ribbon cable with 10-pin 2×5 socket connectors at 1.27mm (0.05") pitch on both ends. Designed for SWD (Serial Wire Debug) programming and debugging connections commonly found on ARM Cortex development boar...

SKU: AF-2225 | Brand: Adafruit

This is just a standard USB-A jack.  It's a sturdy metal with 4 pins in the back and 2 small mounting tabs that make it easy to use in your next USB projectWe use this USB-A jack for everything, really. With a li...

SKU: AF-2102 | Brand: Adafruit

This 2×5 (10-pin) IDC breadboard helper makes it easy to connect standard 10-pin IDC ribbon cables to a breadboard or Perma-Proto board. The two-piece design consists of a pin-through socket that straddles the centre ...

SKU: DF-FIT0146 | Brand: DFRobot

An 8-pin female header with extra-long legs, designed for stacking Arduino shields. The extended pins pass through to the board below, allowing multiple shields to be stacked on a single Arduino. Pins are spaced at st...

SKU: SF-PRT-14417 | Brand: SparkFun

Here is a tiny 4-pin Qwiic 1mm JST connector. This connector is used on all of our Qwiic-based boards and can be used to create your own I2C-based device compatible with the Qwiic system!Additionally, this connector w...

SKU: PL-2441 | Brand: Pololu

These side-entry screw terminal blocks have a pitch of 5 mm (0.197″). Each block has three terminals for the stripped ends of 22 – 14 AWG wires, and units can slide together to make longer strips. They ar...

SKU: AF-2714 | Brand: Adafruit

An extra-tall 2×20 SMT (surface-mount) female header designed for Raspberry Pi HATs. The increased height provides additional clearance for stacking multiple HATs or accommodating taller components on the Pi, such as ...

SKU: AF-2672 | Brand: Adafruit

These 2 mm pitch 25-pin female socket headers are perfect for connecting to modules and boards that use 2 mm pin spacing instead of the standard 2.54 mm (0.1″) pitch. Each pack includes five 25-pin strips that can be ...

SKU: SF-WRL-09145 | Brand: SparkFun

This is a 4" connector cable that interfaces U.FL RF connectors to regular SMA connectors. Documents: Datasheet RF Connector Buying Guide

SKU: SF-SEN-08733 | Brand: SparkFun

Three pin JST connector with red, black, and yellow colors. 5 inch wire outs. This cable comes fully assembled as shown and connects directly to many different Sharp sensors. Quick and easy, this cable will save yo...

SKU: SF-PRT-08534 | Brand: SparkFun

Ethernet is now ubiquitous with embedded systems. Before you can get your set-top box on the internet, you’ll need one of these single port, RJ45 ethernet jacks with built in transformer (magnetics), status LEDs, a...

SKU: SF-PRT-08235 | Brand: SparkFun

Screw Terminals with 3.5mm pitch pins. Comes in 2 or 3 positions and have the really cool feature of slide-locking together to form any size you need (4, 5, up to 20 without problems). Rated up to 125V @ 6A. Terminal ...

SKU: AF-2888 | Brand: Adafruit

A BNC (Bayonet Neill–Concelman) male plug with a screw terminal block for solderless connections. Use stranded or solid-core wire and a small screwdriver to create custom wiring jigs for test equipment, video signals,...

SKU: SF-PRT-08084 | Brand: SparkFun

Screw Terminals with 3.5mm pitch pins. Comes in 2 or 3 positions and have the really cool feature of slide-locking together to form any size you need (4, 5, up to 20 without problems). Rated up to 125V @ 6A. Terminal ...

SKU: SF-PRT-11896 | Brand: SparkFun

A standard 10-pin female header with 0.1" (2.54 mm) pitch, designed for through-hole soldering. Mates with standard 10-pin male headers for board-to-board connections, breakout boards, and prototyping. Specifications...

SKU: SF-PRT-13875 | Brand: SparkFun

This is a simple 3 pin female PTH header. This header is in a configuration that makes it ideal to be used with the MyoWare Muscle Sensor line. Each pin has a spacing of 0.1" in between each other. Documents: Da...

SKU: AF-394 | Brand: Adafruit

Pogo pins are little spring-loaded contacts, very handy for making jigs, or making momentary (but electrically solid) contacts. We use them by the dozen for making programming and testing jigs but they're handy also i...

SKU: SF-PRT-13054 | Brand: SparkFun

A 2×20 shrouded (boxed) header designed to match the Raspberry Pi GPIO pinout. It provides a keyed, polarised connection point so you can run a ribbon cable from your Pi's GPIO to a breakout board, HAT prototype, or c...

SKU: PL-1914 | Brand: Pololu

These 2×6-pin crimp connector housings let you quickly build custom cables that mate with standard 0.1" (2.54mm) spaced connectors. Pair them with pre-crimped terminal wires to create reliable, removable twelve-wire c...