Environmental (temperature, humidity, air quality)

SKU: DF-SEN0570 | Brand: DFRobot

Fermion: MEMS Smoke Gas Detection Sensor employs state-of-the-art microelectromechanical system (MEMS) technology, endowing the sensor with compact dimensions (13x13x2.5mm), low power consumption (<20mA), minimal heat...

SKU: DF-SEN0567 | Brand: DFRobot

Fermion: MEMS Ammonia NH3 Gas Detection Sensor employs state-of-the-art micro-electromechanical system (MEMS) technology, endowing the sensor with compact dimensions (13x13x2.5mm), low power consumption (<20mA), minim...

SKU: KI-5336 | Brand: Kitronik

The Kitronik Smart Air Quality Board provides a complete air monitoring and datalogging solution for the Raspberry Pi Pico. With an onboard BME688 environmental sensor, OLED display, real-time clock support, and Micro...

SKU: SF-SEN-19096 | Brand: SparkFun

The SparkFun BME688 Environmental Sensor is a breakout that combines a gas scanning sensor with temperature, humidity, and barometric pressure sensing for a complete environmental sensor in a single package. The ga...

SKU: DF-SEN0501 | Brand: DFRobot

This multifunctional environmental sensor comprises SHTC3 temperature & humidity sensor, BMP280 barometric pressure sensor, VEML7700 ambient light sensor, and ML8511 UV sensor into one and offers 5 kinds of environmen...

SKU: AF-4829 | Brand: Adafruit

The Adafruit SGP40 is a next-generation MOX (metal-oxide) gas sensor from Sensirion for indoor air quality monitoring. Unlike its predecessor the SGP30, the SGP40 outputs a raw signal that is processed through Sensiri...

SKU: SF-SEN-16295 | Brand: SparkFun

The MCP9600 Breakout is a high accuracy Thermocouple Amplifier equipped with an I2C interface, accessed over our Qwiic system. Inside the chip are two temperature sensors, one for the thermocouple itself (the hot junc...

SKU: LB-24-THERMISTOR | Brand: Little Bird

A thermistor changes its resistance with temperature. Find our tutorial here A thermistor is a type of variable resistor whose resistance changes with temperature. Let's take a closer look at the thermistor module....

SKU: DF-DFR0588 | Brand: DFRobot

Gravity: Analog SHT30 Temperature & Humidity Sensor adopts the new generation SHT30 temperature and humidity sensor from Sensirion. Thanks to Sensirion's CMOSens® technology, highly integrated capacitive humidity sens...

SKU: AF-4258 | Brand: Adafruit

The Adafruit LPS35HW is a water-resistant barometric pressure and temperature sensor from ST. The sensing element is housed in a ceramic package with waterproof gel protection, making it safe to use in damp and humid ...

SKU: AF-2651 | Brand: Adafruit

The BMP280 from Bosch is a precision barometric pressure and temperature sensor, and the next-generation upgrade to the BMP085/BMP180/BMP183 family. With support for both I2C and SPI communication, it offers flexibili...

SKU: SF-SEN-00250 | Brand: SparkFun

10K thermistor with a negative temperature coefficient. Good choice for temp-sensing applications when you need a reliable NTC thermistor. Vishay part #: NTCLE100E3103JB0 Note: You get only one thermistor. Document...

SKU: SF-SEN-13763 | Brand: SparkFun

A low-cost, highly accurate digital humidity and temperature sensor breakout board based on the Silicon Labs Si7021. Communicates over I²C with just two data lines, providing relative humidity and precise temperature ...

SKU: DF-SEN0134 | Brand: DFRobot

The Gravity MQ-9 gas sensor detects carbon monoxide (CO) and combustible gases including methane and propane. It uses a semiconductor SnO2 sensing element that cycles between high and low temperatures — detecting CO a...

SKU: AF-270 | Brand: Adafruit

A Type-K thermocouple with fiberglass braid insulation, rated to 500°C — far beyond the ~200°C limit of standard vinyl-insulated thermocouples. The bare bead probe design is suited to measuring both air and surface te...

SKU: AF-381 | Brand: Adafruit

This is a pre-wired and waterproofed version of the DS18B20 sensor. Handy for when you need to measure something far away, or in wet conditions. While the sensor is good up to 125°C the cable is jacketed in PVC ...

SKU: SF-SEN-09570 | Brand: SparkFun

Melexis' MLX90614ESF-BAA is an infrared thermometer designed for non-contact temperature sensing. An internal 17-bit ADC and a powerful DSP contribute to the MLX90614’s high accuracy and resolution. It has a huge numb...

SKU: DF-SEN0514 | Brand: DFRobot

This Gravity: ENS160 Air Quality Sensor, based on ScioSense's new ENS160 sensor chip, is specifically designed for indoor air quality monitoring and offers detection of multiple IAQ data (TVOC, eCO2, AQI).The innovati...

SKU: AF-4375 | Brand: Adafruit

A simple I2C temperature sensor in a breadboard-friendly TO-220 package. The TC74A0 provides basic temperature readings with ±2°C accuracy — a straightforward choice when you need easy temperature logging or monitorin...

SKU: DF-SEN0372 | Brand: DFRobot

This is a breakout version of BMP280 Barometric Pressure Sensor from DFRobot with temperature and pressure measurement functions, supporting Arduino code control.Housed in an extremely compact package, the BMP280 is b...