Environmental (temperature, humidity, air quality)

SKU: SF-SEN-21262 | Brand: SparkFun

The SparkFun STTS22H is a Qwiic-enabled temperature sensor breakout based on ST Microelectronics' ultralow-power, high-accuracy digital temperature sensor. Factory calibrated to ±0.5°C accuracy without any application...

SKU: SF-KIT-20683 | Brand: SparkFun

The Environmental Monitoring version of the SparkFun OpenLog Data Collector Kit with Machinechat is an easy way to organize and display your data from an included BME280 Qwiic Atmospheric Sensor with the OpenLog Artem...

SKU: SF-KIT-20684 | Brand: SparkFun

The Air Quality Monitoring version of the SparkFun OpenLog Data Collector Kit with Machinechat is an easy way to organize and display your data from an included SGP40 Qwiic Air Quality Sensor with the OpenLog Artemis ...

SKU: DF-SEN0528 | Brand: DFRobot

The AHT20 is a high-precision but low-cost temperature and humidity sensor, which is equipped with an improved MEMS semiconductor capacitive humidity sensor element. It features standard I2C interface and a wide volta...

SKU: DF-SEN0435 | Brand: DFRobot

Compared to DS18B20, LM35, and other common temperature sensors, the MCP9808 is one of the more accurate temperature sensing options, with a typical accuracy of ±0.25°C and maximum accuracy of ±0.5°C over the sensor's...

SKU: DF-SEN0434 | Brand: DFRobot

The STS35 temperature sensor from Sensirion gives a fully calibrated, linearized, and supply-voltage-compensated digital output and has an outstanding accuracy of up to +/–0.1°C. It provides an operating temperat...

SKU: DF-SEN0473 | Brand: DFRobot

This is a sensor that detects hydrogen concentration and supports three output modes: analog, I2C, and UART. The probe has been calibrated at the factory, which can quickly and accurately measure the concentration of ...

SKU: DF-SEN0517 | Brand: DFRobot

This barometric pressure temperature sensor is equipped with TDK's newly-launched ICP-10111 barometric pressure sensor, which is based on MEMS capacitor technology to achieve ultra-low power consumption, industry-lead...

SKU: SF-SEN-19325 | Brand: SparkFun

The SEN54 sensor module from Sensirion combines the measurement of particulate matter, VOC, humidity, and temperature in a single package. The SEN54 sensors provide fully calibrated outputs with a digital interface, a...

SKU: DF-SEN0471 | Brand: DFRobot

This is a sensor that detects nitrogen dioxide concentration and supports three output modes: analog, I2C, and UART. The probe has been calibrated at the factory, which can quickly and accurately measure the concentra...

SKU: DF-SEN0516 | Brand: DFRobot

This barometric pressure temperature sensor is equipped with TDK's newly launched ICP-10111 barometric pressure sensor, which is based on MEMS capacitor technology to achieve ultra-low power consumption, industry-lead...

SKU: DF-SEN0474 | Brand: DFRobot

This is a sensor that detects hydrogen chloride concentration and supports three output modes: analog, I2C, and UART. The probe has been calibrated at the factory, which can quickly and accurately measure the concentr...

SKU: DF-SEN0468 | Brand: DFRobot

This is a sensor that detects chlorine concentration and supports three output modes: analog, I2C, and UART. The probe has been calibrated at the factory, which can quickly and accurately measure the concentration of ...

SKU: DF-SEN0472 | Brand: DFRobot

This is a sensor that detects ozone concentration and supports three output modes: analog, I2C, and UART. The probe has been calibrated at the factory, which can quickly and accurately measure the concentration of ozo...

SKU: DF-SEN0476 | Brand: DFRobot

This is a sensor that detects phosphine concentration and supports three output modes: analog, I2C, and UART. The probe has been calibrated at the factory, which can quickly and accurately measure the concentration of...

SKU: DF-SEN0454 | Brand: DFRobot

A relay-output water leak detector with NO/NC (normally open/normally closed) switching. When water contacts the two sensing probes, the built-in relay triggers — suitable for activating alarms or shutting off equipme...

SKU: DF-SEN0440 | Brand: DFRobot

A compact MEMS gas sensor breakout based on the MiCS-5524, capable of detecting concentrations of multiple gases including carbon monoxide (CO), methane (CH4), ethanol (C2H5OH), propane (C3H8), butane (C4H10), hydroge...

SKU: DF-SEN0332 | Brand: DFRobot

This Digital Temperature & Humidity Sensor Breakout Board is based upon the Sensirion SHT31-F sensor IC. Thanks to Sensirion’s CMOSens® technology, highly integrated capacitive humidity sensing components and band-gap...

SKU: DF-SEN0423 | Brand: DFRobot

A high-precision digital barometric pressure sensor breakout based on the Bosch BMP390L. Designed for industrial-grade applications, it delivers exceptional temperature stability, low drift, and ultra-low power consum...

SKU: AF-5165 | Brand: Adafruit

The Adafruit MCP9601 (MCP96L01) I2C Thermocouple Amplifier handles all the analogue complexity of thermocouple measurement over a simple I2C interface. Connect your thermocouple, wire up I2C (or use the solderless STE...