Environmental (temperature, humidity, air quality)

SKU: RP-SC0329 | Brand: Raspberry Pi Ltd

Raspberry Pi Sense HAT V2 — Your Mission Control for Data, Dazzle, and DIY Experiments!What if your Raspberry Pi could sense everything—orientation, weather, movement, your own code-controlled lightshow…and let you in...

SKU: DF-SEN0629 | Brand: DFRobot

  The BME688 AI Environmental Sensor is a highly advanced MEMS sensor that combines temperature, humidity, barometric pressure, and VOC detection in a single, compact package. Featuring ±0.5°C temperature accurac...

SKU: AF-2738 | Brand: Adafruit

Control the same hardware as used in space...build your very own Astro Pi with the new Raspberry Pi Sense HAT! The Raspberry Pi Sense HAT is attached on top of the Raspberry Pi via the 40 GPIO pins to create an ‘As...

SKU: KI-5038 | Brand: Kitronik

The Kitronik Air Quality Control HAT for Raspberry Pi lets you monitor, log, and react to environmental data using the BME688 sensor. It measures temperature, pressure, humidity, air quality index, and eCO2, with an o...

SKU: DF-EDU0157-EN | Brand: DFRobot

The Lark Weather Station is a compact, all-in-one portable weather device that measures wind speed, wind direction, temperature, humidity, and air pressure. It supports real-time data output via I2C and UART, making i...

SKU: DF-SEN0454 | Brand: DFRobot

A relay-output water leak detector with NO/NC (normally open/normally closed) switching. When water contacts the two sensing probes, the built-in relay triggers — suitable for activating alarms or shutting off equipme...

SKU: AF-6478 | Brand: Adafruit

This compact breakout combines the STCC4 CO2 sensor with a Sensirion SHT41 temperature and humidity sensor for convenient indoor air monitoring. The STCC4 measures true CO2 using a thermal conductivity method rather t...

SKU: DF-SEN0678 | Brand: DFRobot

This Gravity air quality module uses Sensirion’s STCC4 gas sensing chip to directly measure carbon dioxide with the thermal conductivity measurement principle. It is designed for compact, cost-effective indoor monitor...

SKU: SF-KIT-27213 | Brand: SparkFun

This kit brings together the main parts needed to evaluate and deploy a LoRaWAN® IoT sensor system: a Digi HX15 Gateway for LoRaWAN®, a SparkFun IoT Node for LoRaWAN® board and a SparkFun ENS160/BME280 Qwiic Environme...

SKU: PL-1643 | Brand: Pololu

Sparkfun’s carrier board for the HIH-4030 relative humidity (%RH) sensor from Honeywell outputs an analog voltage that varies nearly linearly with humidity. It operates at 5 V while drawing only 200 μA and ...

SKU: PI-RPI-005 | Brand: Pimoroni

Make your Raspberry Pi into an Astro Pi with the Sense HAT - Pressure, humidity, temperature and orientation sensors combined with a beautiful 8x8 LED matrix!Attach the HAT to your Pi's GPIO pins and you can...

SKU: RP-SC0329_1 | Brand: Raspberry Pi Ltd

The Raspberry Pi Sense HAT is an add-on board that attaches to the Raspberry Pi via the 40-pin GPIO header, adding a suite of environmental and motion sensors, an 8×8 RGB LED matrix, and a mini joystick. It's the same...