Enclosures & Hardware

SKU: PH-105820 | Brand: PiHut

The FLIRC case for the Raspberry Pi 5 combines a sleek aluminium top with an ABS plastic base for effective passive cooling and a premium look. The included ARCTIC thermal pad transfers heat from the CPU to the alumin...

SKU: AF-4255 | Brand: Adafruit

Brass heat-set inserts provide strong, reusable threaded connections in 3D-printed and injection-moulded plastic parts. Each insert has a knurled outer surface that grips the surrounding plastic when pressed in with a...

SKU: SF-DEV-11235 | Brand: SparkFun

The Arduino and Breadboard Holder is a sturdy plastic base plate that keeps your Arduino and breadboard neatly organised during prototyping. The board mounts with two included screws using the standard Arduino mountin...

SKU: LB-LS0818-LIGHT-BLUE | Brand: Little Bird

These soft rubber cases will protect your micro:bit while also looking super cute! It is made from hard-wearing, soft, flexible rubber, making it easy to fit or remove it. The white piece lets you see the labels on th...

SKU: DF-FIT0871 | Brand: DFRobot

The Argon ONE M.2 is a premium aluminium alloy case for the Raspberry Pi 4B, featuring an M.2 SATA SSD expansion slot for faster boot times and larger storage. With its Space Grey finish, full-size dual HDMI output, a...

SKU: AF-3299 | Brand: Adafruit

Totaling 380 pieces, this M2.5 Screw Set is a must-have for your workstation. You'll have enough screws, nuts, and hex standoffs to fuel your maker tendencies for days on end! M2.5 size screws fit almost all of the...

SKU: LB-HS4342 | Brand: Little Bird

SKU: YH-6000300964 | Brand: Little Bird

This new Micro:bit cute silicone case is compatible with Micro:bit V1 and V2 board. All holes are specially designed for the 2nd-generation Micro:bit board, which does not affect speaker, touch logos and microphone...

SKU: LB-MAKER-ORANGE | Brand: Little Bird

The Maker Case 12cm is a compact zippered pouch designed for carrying small electronics on the go. It fits boards like the Raspberry Pi, micro:bit, Arduino Nano, and similar single-board computers or microcontrollers,...

SKU: AF-1468 | Brand: Adafruit

Get that heat sink stuck on good and strong with 3M's thermal tape. Specifically designed for attaching heat sinks to ICs. Works better and is less messy than thermal glues or pastes because the thickness is even acro...

SKU: LB-LS2429 | Brand: Little Bird

Totalling 1080 pieces, this Stainless Steel Screws and Nuts Set is a must-have for your workstation. You'll have enough screws, nuts, and hex standoffs to fuel your maker tendencies for days on end! These screws will ...

SKU: DF-FIT0603 | Brand: DFRobot

A transparent ABS case designed specifically for the Arduino UNO R3. The case protects your board from dust, splashes, and accidental short circuits while keeping all GPIO pins accessible through dedicated slots. The ...

SKU: AF-5528 | Brand: Adafruit

This Anodised Aluminium Machined Knob in silver is a premium upgrade for any rotary encoder or potentiometer. Solid machined aluminium with knurled sides for a secure grip and a shiny anodised finish that looks right ...

SKU: DF-FIT0007 | Brand: DFRobot

A sturdy metal ball caster made from 1 mm stamped steel plate, capable of supporting loads up to 15 kg. At just 37 g and 20 mm tall, it provides smooth omnidirectional movement without adding significant weight to you...

SKU: AF-3662 | Brand: Adafruit

If your soldering isn't quite up to scratch, or you just don't own a soldering iron yet, then these nifty hammer headers from Pimoroni might be just what you need.  Absolutely no soldering required! All t...

SKU: AF-1178 | Brand: Adafruit

Rollin' rollin' rollin', you can now roll around smooth as silk with these radial bearings. Often referred to as "skate bearings" They're good for supporting a rotating rod or as a wheel hub. However, these are higher...

SKU: AF-2430 | Brand: Adafruit

Pogo pins are little spring-loaded contacts, very handy for making jigs, or making momentary (but electrically solid) contacts. We use them by the dozen for making programming and testing jigs but they're handy also i...

SKU: PL-1089 | Brand: Pololu

This compact bracket enables convenient mounting of popular, Sanyo-style micro metal gearmotors. The white plastic bracket encloses the otherwise exposed gears, and the mounting tabs capture the nuts for easy install...

SKU: AF-550 | Brand: Adafruit

Small self-adhesive rubber bumper feet for electronics boards and devices. Stick them to the bottom of any PCB to protect your desk, prevent sliding, and provide clearance for through-hole solder joints underneath. T...

SKU: AF-737 | Brand: Adafruit

This power distribution bus is machined from a single piece of solid brass, providing a reliable way to distribute power across multiple wires in a project. Seven screw-terminal holes accept wires of 20 AWG or larger ...