Education

SKU: EC-SER0001P | Brand: Elecrow

This Crowtail-Starter Kit for Raspberry Pi will be one of the best kits for you to get started with Raspberry Pi and Python! This kit includes a Crowtail-Base Shield for Raspberry Pi and more than 22 modules like R...

SKU: SF-DEV-11113 | Brand: SparkFun

It’s blue! It’s thin! It’s the Arduino Pro Mini! SparkFun’s minimal design approach to Arduino. This is a 5V Arduino running the 16MHz bootloader. Arduino Pro Mini does not come with connectors populated so that yo...

SKU: ET-1734943 | Brand: Little Bird

Description: This 1m Cat5 lead is perfect for all your Raspberry Pi networking needs.   Features: LEAD, CAT 5E, 1M, BLACK Connector Type A: RJ45 Plug Connector Type B: RJ45 Plug Cable Length - Imperial: 3.2...

SKU: KI-5647 | Brand: Kitronik

The Prong Soil Moisture Sensor mounts directly onto a BBC micro:bit to monitor soil moisture levels. Two conductive tines are inserted into the soil — any moisture conducts an analogue voltage that the micro:bit reads...

SKU: LB-LS6547 | Brand: Little Bird

DIY FM Radio Kit – 87-108MHz Digital DisplayTake your soldering skills to the next level with this DIY FM Radio Kit! Designed for hands-on learning, this kit lets you build a fully functional FM radio receiver while r...

SKU: LB-PT101011M | Brand: Little Bird

A 20-metre roll of 5 mm wide copper tape with conductive adhesive backing. The conductive adhesive ensures electrical continuity through the tape, making it ideal for creating low-profile circuit traces, RF shielding,...

SKU: EF-EF08254 | Brand: ElecFreaks

The micro:bit Smart Agriculture Kit has a well-selection of IoT:bit, DS18B20 temperature sensor, soil moisture sensor, water level sensor, PIR sensor, servos and etc., we could use it to build such themes as the sm...

SKU: EF-EF08197 | Brand: ElecFreaks

The ElecFreaks Smart Home Kit is a micro:bit project kit for building interactive smart home models. It includes sensors, actuators, and cardboard building materials to create miniature scenes — a windowsill, wardrobe...

SKU: LB-LR0474 | Brand: Little Bird

A handy little box of components. This includes a great variety of electronic components to use with your arduino or raspberry pi. The box includes LEDs 5 x White, Yellow, Blue, Green, Red 2 x Potentiometer 6 x Bu...

SKU: LB-LR0065 | Brand: Little Bird

The KnockOffDuino MEGA is a budget-friendly, fully Arduino MEGA 2560 R3-compatible development board. It features the same ATmega2560 microcontroller, pinout, and form factor as the original, making it a cost-effectiv...

SKU: EF-EF03426 | Brand: ElecFreaks

IOT:bit is an expansion board based on IoT for micro:bit. It uses ESP8266 as WIFI expansion board and serial port to communicate with micro:bit. It also has extended all available IO port of the micro:bit which is lea...

SKU: LB-EAGLED-BUZZ | Brand: Little Bird

EagLED is Little Bird Electronics' wearable development kit: an Arduino-compatible microcontroller board with LEDs, a light sensor, push button and buzzer built into a snippable PCB for e-textile projects.Built-in USB...

SKU: EF-EF03417 | Brand: ElecFreaks

Joystick:bit V2 is a JoyStick based on micro:bit. It contains a 4-direction joystick and 4 undefined buttons as as classic JoyStick. At the same time, with the board buzzer and vibration motor, it also enhance game...

SKU: LB-EAGLED-LED-W | Brand: Little Bird

The EagLED is a sewable white LED designed and made in Sydney. Each pack contains 10 LEDs connected in a snap-apart strip, so you can break them off as needed for your project. Large sew tabs allow you to loop conduc...

SKU: EF-EF03415 | Brand: ElecFreaks

The sensor:bit is a breakout board for the BBC micro:bit that extends all available I/O ports into standard GVS (Ground-Voltage-Signal) pin headers. This makes it easy to connect 3 V electronic modules like LEDs, phot...

SKU: LB-EAGLED-LED-B | Brand: Little Bird

Made here in Sydney these are our very own EagLED LED - Blue in a pack of 10 These are still attached to one another, letting you snap the LEDs apart at your leisure to sew into clothing or use in Paper Circuits. ...

SKU: LB-BIRDBIT | Brand: Little Bird

This robot is a graphical programming robot for STEM education utilising the simple programming of the micro:bit to achieve great results.   This compact robot is plug and play allowing children to quickly learn...

SKU: LB-LS0823 | Brand: Little Bird

The Micro: bit GPIO T-type Expansion Board is a board that connects to the BBC micro:bit and expands the capabilities of the development platform by providing access to more pin. This breakout board for the micro:b...

SKU: EF-EF09082 | Brand: ElecFreaks

EF92A is a kind of 180 deg analog servo. It is light and portable, a little bigger than 5 cent coin. It works at 3V voltage and can be used to make small robot modules, mechanical arm modules and intelligent car modul...

SKU: LB-LR0281-11 | Brand: Little Bird

A bulk assortment of 300 through-hole LEDs in both 3mm and 5mm sizes, covering five popular colours. All LEDs come organised in a handy storage case, making it easy to find the right colour and size for your project. ...